Technical requirements: 1. The allowable deviation for the height and width of the door leaf is ± 2, the allowable upper deviation for the thickness of the door leaf is+2, and the allowable lower deviation is - 1, the allowable deviation for the height of the inner rabbet of the door frame is ± 3, and the allowable deviation for the width of the inner rabbet and the side wall is ± 2. 2. The clearance between the door leaf and the upper frame shall be ≤ 3mm, the clearance between the door leaf and the binding surface of the door frame, the clearance between the door leaf and the side with hinges/locks and the binding surface of the upper frame shall be ≤ 3mm, and the clearance between the door leaf and the lower frame shall be ≤ 6mm. 3. Diagonal dimension tolerance of door frame and door leaf ≤ 3mm; Door leaf distortion ≤ 5mm; The bending degree of door leaf width and height direction is less than 2 ‰. 4. Door frame section 5
Special statement: This material belongs to the sharing uploaded by users Downloaded content, only for learning, not for commercial use. If there is any copyright problem, please timely contact Station delete!
Collection
share
WeChat code scanning and sharing
Click to share