-
The welding fixture for the car seat frame, designed by myself, has not been manufactured yet. The mechanism is relatively complete, including manual quick clamping and cylinder clamping, which is a more practical structure! The green part in the figure is the part drawing, which needs one-time clamping, all welding, and one-time welding is completed! It can be used as a reference for such fixture design
-
1. The drawing shows the data of the front seat frame of a domestic car. The seat frame is divided into cushion frame and backrest frame. The cushion frame is generally equipped with electric adjustment motor, weight sensor, electrical parts mounting bracket and other structures. 2. The seat backrest in the drawing file is electrically adjustable, and the document also contains the schematic diagram of the adjustable position of the seat. 3. This drawing is only for exchange and learning, please do not use it for commercial purposes, thank you
-
The design model of the car passenger front seat frame, the air bag is connected with the air pump through the air duct, and the air pump is connected with the air pump control device. Car seats and cars can flexibly adjust the size of seat wings to meet the requirements of different passengers for comfort
-
The seat welding tooling can be used for the car seat as a reference guide for the welding of the car seat backrest cushion frame. Currently, standard cylinder design is adopted, and all design modules are standard modules. All joints meet the basic design requirements of the seat, and all necessary adjustment positions are three-way adjustable mechanisms; The robot overturning platform adopts a standardized quick installation platform, which can be used directly for reference. DMU analysis has been carried out for all tooling to ensure design effectiveness. The current data is in the format of 3DMAX and cannot be edited
-
This drawing is a repair welding fixture for the front seat frame of the car, which can be used for repair welding. This fixture uses the cylinders on the left and right sides for clamping, and uses the positioning pins for positioning. The welded skeleton products are added in the design for analysis, and the design is relatively reasonable. Welcome to download
-
Racing seats with carbon fiber backrest frame: carbon fiber material has the advantages of light weight, high strength, corrosion resistance, fatigue resistance, etc., and is widely used in the production of racing seats. The racing seat with carbon fiber backrest frame can provide better support and wrapping, providing drivers with a safer and more comfortable driving experience.
-
This drawing file is the welding clamp of the car seat frame. The clamp uses the cylinder to clamp and position the parts, and uses the positioning pin to position. The welding frame products are added in the design for analysis. The design is reasonable. Welcome to download. This drawing is only for exchange and study, please do not use it for commercial purposes, thank you
-
Share a catia drawing car seat skeleton model, which has complete parts and components. The model is assembled from a general assembly drawing, four sub assembly drawings and many parts. The model is drawn by entities, which can be modified and edited. Welcome to download it if you need it
-
The document provides a set of overall design of the seat cable. The document uses CATIA software for structural design. On the premise that the structural scheme meets the overall functions of the seat, considering the humanization requirements of the seat, it is applicable to the requirements of modern car seats. Welcome to download
-
Drawing introduction: It is designed by Solidworks and the skeleton structure model of the glider is made by ourselves. First, we need to find a lighter material with high hardness. I suggest that it is better to use titanium to make the lower part of the wing relatively flat, and the upper side of the wing as close to 60 degrees as possible. The wing length with an included angle of 75 degrees in front should not exceed 4 meters. It is designed for you beside you. All mechanical control model fans, welcome to download
-
A welding fixture model is recommended. The model is in stp format and can be edited. It does not contain parameters. It is an original drawing. You are welcome to download it for reference. (Car seat backrest frame clamp OP20)
-
1. The cushion frame is generally wrapped by foam and skin, which is the main bearing of human weight and has strength requirements. 2. The drawing file is the seat cushion frame assembly of a car manual adjustment version, and the data includes the seat cushion frame, seat slide rail, seat connector, backrest angle adjustment mechanism, backrest rotation shaft, etc. 3. This drawing is only for exchange and study, please do not use it for commercial purposes
-
This is a set of flanging dies for sheet metal parts. The positioning method of sheet metal parts is contour positioning, and the ejection method is bench ejector. The die is a one out two die, that is, one stamping can produce two parts. Welcome interested friends to download the instructions
-
1. The cushion frame is generally wrapped by foam and skin, which is the main bearing of human body weight, and has strength requirements, Just press the corresponding electric control button, the seat backrest angle will be automatically adjusted. 4. This drawing is only for exchange and study, please do not use it for commercial purposes
-
The welding process equipment/pneumatic clamping and robot welding of the car seat backrest frame are reasonably designed, easy to operate, UG design, editable and modifiable, modular design, and standard blocks can be used for reference. The good thing is to share it with everyone
-
1. The figure shows the data of the front seat back frame of a car. The seat back is electrically adjusted, and the position of the electric adjustment motor is arranged inside the side plate. It is different from other models, and its structure is relatively new, which can be used as a reference. 2. This drawing is only for exchange and study, please do not use it for commercial purposes, thank you
-
Robot welding workstation for car seat frame, including welding fixture and horizontal automatic turntable system, can automatically switch stations and processes by using double positioner, and is equipped with Yaskawa MH50 handling robot and MA1900 spot welding robot respectively, which can complete the welding task of seat frame structure and unloading, transportation and replacement work at one time, It is a rare reference for automobile welding equipment. There is CATIAR20 assembly node without reference document, and the final assembly product file name is RobotWeldingWorkstation. Other part data are in cgr format
-
Drawing introduction: The model is designed with UG software, and the simple seat frame welding tooling model is mainly used to put the parts of the seat on the fixture and position them according to the welded finished products, and assist the robot to carry out automatic welding. The positioning tooling is mainly used for clamping and support. The model is realistic, without parameters, and can be modified. STP download is available. The assembly is 123_sldasm, which helps your product design. Fans of mechanical control models, welcome to download
-
The inspection tool is a simple tool used by industrial production enterprises to control various sizes of products (such as aperture, space size, etc.), improve production efficiency and control quality, and is suitable for mass production of products, such as auto parts, to replace professional measuring tools, such as smooth plug gauge, spiral plug gauge, outer diameter caliper gauge, etc. The accessory inspection tool is the inspection tool for the welding assembly of the car seat basin framework
-
The attachment is the inspection tool for the rear seat cushion steel wire frame assembly. Assembly inspection tools are mainly used to complete the measurement in the process of product processing. They often need to test the profile and emphasize the continuity of the surface. The structure of the inspection tool is composed of: 1) the pedestal part; 2) Positioning device (positioning pin, positioning block); 3) Clamping device (clamp, magnet, etc.); 4) Type or body (detection surface, non detection surface); 5) Profile template; 6) Profile movable block; 7) Detection device (detection pin, feeler gauge, scribe line, dial indicator, etc.)
-
Manual welding fixture for rear seat frame: design of pre sampling for product development. It is used for manual welding of skeleton. Later, batch robot welding is completed. Because it is cost saving for sample making, it does not use too many and complicated mechanisms. All are pressed with quick clamps
-
This tooling is a welding tooling for the seat back frame, which is the frame of the seat back. It is pneumatically compressed, manually loaded, and then pressed the manual valve switch to achieve the clamping action. In order to facilitate the retrieval of materials, the positioning retractable main positioning is adopted. Welcome to download
-
The fixture is a motion confirmation fixture, and the workpiece is the backrest framework of the car. 1. Pin hole positioning is used in the fixture to ensure that the workpiece is fixed. 2. The workpiece is a welded skeleton, which is composed of springs, side plates and elbows. There are many curved surfaces for reference. Some parts do not contain parameters
-
This drawing shows the assembly line clamp for welding the skeleton of the front row of the seat. The clamp is designed with locating pins around it to fix the product. The clamp can be used on many models. At the same time, the clamp can rotate. The handle is designed to rotate at multiple angles according to different operations, which is convenient for operators. Welcome to download
-
This is a car seat welding framework assembly. The welding framework is mainly composed of elbows, retractors, brackets, etc., with a complex structure, which can be used for your reference. At the same time, the model can be used for seat stress analysis, welding fixture analysis, etc. Welcome to download
-
This model is a semi product of the welding of the car seat frame. The semi-finished product is mainly composed of sheet metal parts and stamping parts, including side plates, reinforcing tubes and wire rods. The product structure is relatively complex, with many curved surfaces for everyone to learn from
-
This is a plastic skeleton structure model of the office chair back. This model contains a face shell and a back plate. As far as the appearance design is concerned, the face shell is also designed on the back curve of the human body, and a "convex hull" is made at the lower part of the back. Obviously, this is to increase the strength of the force. One thing that is puzzling is the mode of parting (ejection) of the backplane, which I can not deduce for the time being
-
This is the car body designed and welded by the author through the profile structure. Because it is a universal profile, the production cost of the car body is low. The welding position of the mounting bracket is first determined through the design and analysis of the suspension hard spot, then the bracket at the corresponding design reasonable position is designed, and then the skeleton is used for welding the bracket. At the same time, the strength, fatigue, and force rationality of the entire skeleton should be considered, And welding process. It is a typical reference case of profile skeleton welding
-
Nowadays, cars have become one of the main means of transportation for people, and people have higher and higher requirements for cars. Among them, car seats are closely related to driving comfort, and various kinds of car seats have been developed to meet people's various needs. The automobile aviation seat came into being as the times require. It is a widened seat with armrests and leg supports that can be converted into a recliner. The design of the seat includes the overall design and the design of some parts, and the overall design includes the basic function design and construction design. The parts design includes frame design, double side armrests design, front foot support design and rear armchair design
-
The welding tooling station for the rear seat backrest frame includes positioner, welding tooling, and parts, which are clamped with manual clamps. The main body of the frame is 22 pipes, and there is cold wire drawing, which is welded with the welding robot to improve the welding efficiency and precision of parts
-
The complete 3D mathematical model of the welding tooling for the armrest frame of the rear car seat includes the armrest frame, the positioning mechanism of the handrail assembly, the clamping framework, the adjustment mechanism, etc. This document contains CATIA V5R2016format model and STP format
-
This figure shows the welding fixture of a car seat backrest frame assembly, which uses CO2 process welding and includes a welding gun to simulate the space for welding. This fixture is installed on the double machine platform for overturning and displacement, and can be used for front and back welding
-
This figure file is the height adjustment and confirmation fixture for the side plate of the car seat frame, which is mainly clamped by the cylinder, and some are clamped by the quick clamp. Workpieces are added in the fixture design, so that there will be no interference with the workpiece in the fixture design. Welcome to download
-
The design of 3D digital model of skeleton design, this skeleton mainly adopts the combination of circular tube and sheet metal, especially the cushion is designed as the structure of the sitting basin, which is equipped with spring, and the overall comfort is satisfied. The structural connection is firm. Welcome to download reference
-
The inspection tool is a simple tool used by industrial production enterprises to control various sizes of products (such as aperture, space size, etc.), improve production efficiency and control quality, and is suitable for mass production of products, such as auto parts, to replace professional measuring tools, such as smooth plug gauge, spiral plug gauge, outer diameter caliper gauge, etc. Inspection tool for automobile seat backrest welding framework assembly
-
This drawing shows the actuating fixture for the front seat backrest frame of the car, which is used for the backrest actuating operation. The fixture uses the workpiece for simulation design, and at the same time uses multiple angles to simulate the operator's operation, so that the fixture design is more consistent with the operator. At the same time, there is a manual valve, which is designed in more detail for your reference. Welcome to download
-
This is the rear seat backrest frame of Toyota Yaris. It is the backrest support structure of the rear seat of the car. The installation structure and various parameters of the skeleton are detailed in the document, and different parts are distinguished by different colors. I hope it can provide strong guidance to relevant technicians
-
Fixture for welding assembly of rear frame of car seat: the main purpose of this kind of tooling is to avoid missing parts. Missing parts induction shall be conducted. There is also the placement order. The order in which the fixture is placed around. The operation of workers is convenient. Some additional equipment considerations
-
This tooling is a welding tooling for the seat backrest frame, which is designed with NX12. The frame of the seat backrest is compressed pneumatically. Manual feeding is performed, and then the clamping action is achieved by pressing the manual valve switch. In order to facilitate material retrieval, the positioning retractable main positioning is adopted, and the accessibility of one welding surface is poor. A new welding fixture for the back is added below. Welcome to download
-
This model is designed by SOLIDWORKS 2012 version. The designed simple trolley seat steel framework is a multi-storey and multi span rigid frame composed of beams and columns, which is used to bear vertical and horizontal loads. Under the action of horizontal load, this structure has the overall lateral displacement as a cantilever beam. The model is realistic and contains parameters, which can be modified. X-T and SOLIDWORKS 2012 are available for download. Welcome to download
