Large shopping malls Electrical construction drawings of fire protection system
Data Catalog 1, Electrical Design Description 2, Automatic Fire Alarm and Linkage Control System Diagram 3, Fire Trunk Line Plan 4, Equipment Trench Fire Protection Plan 5, Fire Protection Plan of B1 in Area A.B 6, Fire Protection Plan of B1 in Area A.B 7, Fire Protection Plan of B1 in Area C.D 8, Fire Protection Plan of B2 in Area C.D 9 E. Fire fighting plan 10 on the first floor of Zone F, fire fighting plan 11 on the second floor of Zone E.F, fire fighting plan 12 on the first floor of Zone G, fire fighting plan 13 on the second floor of Zone G, fire fighting plan 14 on the second floor of Zone H.I, and fire fighting plan content introduction on the first floor of Zone H.I. This data is the construction drawings of electrical fire fighting system for large shopping malls, 16 in total. The building area of the project is 170000 square meters. The fire protection level of the project is Level I, and the fire control center alarm system is adopted. The fire control room is located on the second floor of Zone C, with an exit directly to the outside. Four fire alarm controllers are set inside. Fire linkage equipment control cabinet, fire accident broadcast host, fire telephone host, fire system power supply, etc The fire protection system adopts bus system, which can detect or control directly or through corresponding repeaters. The start and stop of fire pump, spray pump, fire fan and other equipment are all set with direct manual control (hard wire connection) in the fire control room. The fire power load of the project is a class I load. All fire power loads are powered by dual power supply and automatically switched at the final distribution box The working grounding of the fire protection system adopts joint grounding, and the grounding resistance is required to be no more than 1 ohm. The fire control room is equipped with a special grounding terminal box, and the special grounding trunk line is adopted.