-
-
-
[Fujian] Bridge Guard Railing Structure Node Detail Drawing _dwg (CAD, 3 drawings)
This project is the detail drawing of structural node of protective railing of [Fujian] Bridge _dwg (CAD, 3 drawings). The drawings include structural detail of protective railing, anchor detail, N1 steel plate detail, bill of quantities, etc. The contents of the drawings are complete, clear and precise, and designers are welcome to download and use them.
-
-
-
-
The model is the protective fence and control box for robot operation, including the protective fence mechanism, programming keyboard, electric control box, etc., which are used for the protection of the operation area of the automated manipulator, and prevent irrelevant personnel from entering, playing a protective role. The model can be used for reference.
-
-
-
-
Detailed drawing of bridge decoration and wheel slide guardrail
Note: The color and material refer to the sketch master model. The number and size of culverts are determined by the water discipline, and the location is subject to the provision of Party A. The elevation of road and bridge, the plan and section of road and bridge, the elevation of road and bridge wheel slide guardrail, and the standard elevation of wheel slide guardrail
-
The design model of working aerial platform (guardrail) includes main guardrail, side guardrail and guardrail; The main guardrail includes a quadrilateral top frame, each of the four corners of the top frame is vertically connected with a column, and both sides of the main guardrail are respectively provided with a side guardrail. The column includes a central column and a jacket, which can slide up and down along the central column; The side guardrail includes a beam and two support columns; The support column is perpendicular to the beam and set at both ends of the beam. The beam is parallel to the two sides of the top frame (SW2010 drawing, not including parameters, but editable model)
-
The guardrail design model of steel welded structure here refers to the industrial "guardrail" or crash barrier, which is mainly used for the protection and protection of equipment and facilities in factories, workshops and warehouses. Commonly used steel, such as round steel pipe, square steel pipe or profiled steel plate. Surface treatment process: fully automatic electrostatic powder spraying (i.e. plastic spraying) or painting. The materials used for surface treatment of outdoor crash barrier are waterproof materials. The made anti-collision guardrail has beautiful appearance and is not easy to rust. The column of anti-collision guardrail is fixed with the ground through expansion bolts. It is usually installed on both sides of the logistics channel, around the production equipment, building corners, both sides of the door and the edge of the cargo platform
-
It is mainly used for the protective fence which is fixed on the soft surface and is difficult to weld, such as insulation board, insulation board, etc. The structure is 21 meters long and divided into 10 pieces, which is convenient for transportation. Each piece is connected with bolts, which can be used as a reference in the design of protective fence
-
This is the plastic protective mold for the corners of the aluminum profile guardrail, which is used to produce plastic protective articles for the corners of the guardrail. Here we use thimbles, so we give priority to the structure of one mold and one cavity. This structure requires high appearance accuracy and good cavity filling effect for this product, which can effectively ensure the production quality of the product and improve efficiency, and the cost of plastic parts is low
-
The standardized products for edge safety protection during the construction of the main structure of the site. It is mainly composed of guardrail, mounting column and connecting screw. The column is divided into middle column and corner column. Each component can be assembled arbitrarily
-
-
-
Retaining wall and railing of a tunnel Detail
This drawing is the construction method of retaining wall and railing of a certain underpass. There are 2 drawings in total, including the detailed drawing of retaining wall structure and the detailed drawing of railing structure quantities.
-
-
-
[QC Results] Research and development of standardized temporary protective railings in the financial center (48 pages)
The construction area of this project is 80099 square meters, and the total height is 129.9m. The quality objective of this project is to guarantee the "Taishan Cup" and strive for the "Luban Prize". The external wall of the project adopts glass curtain wall. During the structural construction, the periphery of each floor is open. There are many horizontal openings in the building layout. A total of 16204 linear meters of edge protection and 1636 linear meters of stair handrails are required. The protection task is heavy.
-
Technical disclosure of stainless steel protective fence (word format)
(1) Drill M8 holes on both sides of the center plate and the aluminum alloy base, and fix them with screw rods and screw caps. (2) Draw a straight line parallel to both sides in the length direction from the center on the center plate (bottom iron plate), punch holes (matching screws) on the (center plate) at an interval of 50mm, install screws, and slightly rotate the upper slide bar below until it cannot fall down automatically. (3) Pick up the center plate (with slide bars and small pieces of sectional materials) in a balanced way, and insert the two ends of the slide bars from one side of the aluminum alloy base (large) in turn (note: each slide bar inclines in the same direction). Install the center plate in turn according to the above steps, press in the rubber strips, and adjust the position to ensure that the rubber strips on both sides are parallel on the same working surface. (4) Finally, tighten the screw and fasten the deformation joint device.?
-
-
-
The crane in the heavy load transverse moving workshop is equipped with a maintenance guard fence. The workshop produces heavy parts, and heavy products need to be lifted. In the case of transportation, the upper part of the workshop is equipped with a crane for transverse shifting and lifting. The product is lifted and moved by pulling the wire rope through the rotation of the motor, and the stp file is provided
-
Six types of magnetic safety switches are used for the safety fence to prevent people from entering the dangerous area ■ Provide latch switches, safety magnetic switches, safety door lock switches, safety rope switches, emergency stop buttons, chain interlock switches, safety enabling switches, safety limit switches, explosion-proof switches, etc. At the same time with a common format, welcome to download reference learning
-
This drawing is a special fence model for welding robot. The fence is connected by aluminum alloy profiles. The middle is equipped with a protective net, which is very beautiful and practical. The fence is directly installed with a touch screen for easy operation. Surface treatment process: fully automatic electrostatic powder spraying (i.e. plastic spraying) or painting. This model has fine drawing, reasonable structure design, and the drawing has STP format, which is convenient for other software to open. Welcome to download
-
The flexible robot welding workstation of the protective fence uses flexible welding clamps to cooperate with the robot for welding. The flexible welding platform can realize the welding of different types of guardrails, and can also be used for welding other parts. It has strong universal type and wide welding range. The surrounding area is equipped with a protective net, and the robot welding is highly automated. Robots replace manual welding
-
Technical construction scheme of stainless steel protective fence
Put the aluminum alloy base symmetrically into the notch with the seam center (W), and fix the base with expansion bolts. (Make sure that the aluminum alloy base is connected to the same plane, and make sure that the sliding bar placement port of the base at each base joint is connected consistently, so that the sliding bar can move horizontally in the track).
-
-
Crash barrier for municipal roads Detail
This drawing is a detailed drawing of anti-collision guardrail for municipal road vehicles. It has 1 sheet in total, accurate design and detailed content, which can be downloaded for reference by netizens.
-
-
-
-
-
Handrails and drainage ditches for roads and urban roads Detail
This drawing is the detailed drawing of the construction of highway and urban road railings and drainage ditches. It includes the plan and elevation profile of drainage ditches, the elevation of railings, and the reinforcement drawing of beams and columns.
-
CAD design schematic diagram of protective fence around a foundation pit
Schematic diagram of the protective fence around the foundation pit, including the plan, profile, east, west, north and south elevations of each floor. A large number of curves are used to form a strong sense of rhythm in form and effect. Make the building reflect a beautiful and vivid style. Designers in need are welcome to download!
-
-