Product name: carton ring pressure tester
Product model: HT-8005
Product use ： Carton ring pressure tester It uses high-precision sensors to sense and digitally display the strength of the sample. The ring pressure test is used to place the corrugated core paper and kraft paper with a thickness of less than 1mm into a ring container. The machine is used to test the compressive strength of the vertical direction. It can be used with various accessories. It can also test the vertical compressive strength, bonding strength and flat compressive strength of the carton. The operation is safe and simple, The unit of force value tested can be converted.
Requirements for ring pressure and edge pressure test:
A、 Ring pressing is used for corrugated core paper and kraft paper with thickness less than 1mm. The 152X12.7mm sample is placed in a circular container, and its vertical compressive strength is tested with this machine.
B、 Edge pressing is used for corrugated paper with a thickness of less than 8mm. The sample 100X25mm is placed under the 100X100mm pressing plate and fixed with two guide blocks. This machine is used to test the vertical compression strength in the vertical direction.
C、 It can be used with various accessories, and can test the bonding strength and flat compression strength of cardboard.
Compliance with standards TAPPI-T472 JIS-P8126 also conforms to GB2679.8 Determination of Circular Compressive Strength of Paperboard, GB6546 Determination of Edge Compressive Strength of Corrugated Paper Board, GB6548 Determination of Adhesive Strength of Corrugated Paper Board, GB2679.6 Determination of Flat Compressive Strength of Corrugated Core and other standards.
Carton ring pressure tester Technical parameters:
Sensing mode: LOAD CELL force sensor
Capacity: 200kg
Unit switching: Kg/N/Ib
Resolution: 1/10000
Ring compression sample: 152.4 * 12.7mm
Edge pressing sample: 25 * 100mm
Test speed: 12.7mm/min
Press plate parallelism: ± 0.05mm
Accuracy: ± 1%
Display mode: LCD
Print items: maximum value, average value, month, day, year, unit, 12 groups of values can be stored
Pressure plate: 100 × 100 mm or depending on the diameter of flat compression specimen
Effective spacing: 400mm
Volume: length 65 × width 50 × height 85mm
Power supply: 1 ∨, 220V 1.5A (according to the national standard or specified)
Weight: (about) 92kg
