Magnetic induction proximity limit switch
Coffey brand KOFIFLOW series magnetic induction valve responder (SLS-J90-2W/ALS-200D) uses passive electronic switch element reed tube as the main part, which is sealed in a closed plastic shell, and uses two sets of two-wire external leads. The default is normally open. As a line switch device controlled by magnetic field signal, it can be used as a sensor on the valve. It can be transmitted remotely by sensing the opening and closing states of the valve and converting them into electrical signals for feedback to the load equipment. The product adopts horseshoe shaped appearance design, double-sided circuit board, and gold plated foot type reed tube imported from Russia. The installation conforms to NAMUR standard and can be installed on conventional pneumatic actuators.
Standard technical parameters of KOFIFLOW magnetic induction proximity limit switch:
1. Main model description of magnetic proximity switch:
MAGNETIC S&D SWITCH SLS-J90-2W/ALS-200D DOUBLE SENSOR
DC/AC5~240V 300mA 10W
Model customization is available.
2. The shell body is made of ABS plastic, with transparent high hardness electronic potting adhesive built in, which is fully filled;
3. With double position light indicating type, with red LED by default;
4. Built in two sets of two-wire normally open contacts (normally open reed tube);
5. 4-core RVV4 * 0.3 sheathed cable is used, and 4-color cable is clear;
6. Working voltage/current/power parameter DC/AC5~240V 300mA 10W;
7. It can be used in the environment of - 20 ° C~+70 ° C;
8. It adopts full filling type, and the sealing performance can reach IP67 grade;
9. It has 1m (about equal to) lead by default, and wires of different lengths can be customized;
10. Aviation plug type ALS-200P4, 4-core aviation plug is optional;
Installation instructions of KOFIFLOW magnetic induction proximity limit switch:
1. The default configuration list can be installed on the pneumatic actuator of normal size (size conforms to 30-80/H20mm);
2. The top mounting size of the pneumatic actuator is 30-80/H30mm, which requires two thickness plates and three clamping blocks separately;
3. The top mounting size of the pneumatic actuator is 30-130/H30mm, which requires a separate stainless steel mounting bracket and three blocks;
Please consult customer service directly for specific installation dimensions.
Wiring instructions of KOFIFLOW magnetic induction proximity limit switch:
The magnetic switch adopts four core cable lines, two groups of two position type, one group is red line RED and blue line BLUE by default, two groups are yellow line YELLOW and black line BLACK by default, and the positive and negative poles are marked according to the wiring diagram. When connecting power, load equipment shall be added, and two lines cannot be directly connected to the power supply.
Test description of KOFIFLOW magnetic induction proximity limit switch:
Test under normal no load condition: use a conventional multimeter (battery voltage is within 9V), turn to diode gear first, connect two pens to the corresponding line sequence, and align the magnetic induction cap to the corresponding group position. If the LED indicator light of the magnetic switch is on, the product is good.
Routine test under load: first determine whether the load equipment is complete, then connect the load equipment according to the wiring diagram, align the magnetic induction cap to the corresponding group position, and give the signal. If the LED indicator of the magnetic switch is on, the product is good.
KOFIFLOW magnetic induction proximity limit switch (key word of magnetic switch):
ALS-200D/SLS-J90-2W magnetic proximity switch, magnetic switch, normally open magnetic switch, passive dry contact magnetic switch, horseshoe magnetic proximity switch, aviation plug magnetic switch, magnetic induction proximity switch.