Product introduction:
GZT type vibrating feeder, also called bar feeder, is a feeder that uniformly transports large pieces of materials. It adopts double eccentric shaft vibration exciter, which can withstand the impact of large pieces of materials and has a large feeding output. The bar feeder is especially suitable for the water and electricity industry, construction stone, metal ore and other raw materials before crushing. The vibration feeder series produced by Integrity Vibration can be divided into steel plate structure and grate structure. The steel plate structure feeder is mostly used in the sand and gravel production line to evenly feed all materials into the crushing equipment; The grate feeder can coarse screen the materials, making the system more economical and reasonable in configuration.
working principle:
GZT series vibrating feeder is driven by a new type of vibrating motor. This series of vibrating feeder is used for uniform feeding in front of the coarse crusher. At the same time, due to the role of bar screen surface, it can remove fine materials such as soil, achieve the function of pre screening, and improve the coarse crushing capacity. This series of vibration feeder is excited by a new type of vibration motor or vibration exciter, riveted by frame type ring groove rivets, and made of manganese steel with guard plates and bars, which are solid in structure, high in strength, impact resistant, abrasion resistant, and easy to use and maintain.
Product advantages:
1. It is suitable for large material feeder with large feeding capacity and continuous and even feeding.
2. The exciting force is relatively small, the vibration is stable, the work is reliable, and the service life is long.
3. The mechanism of the machine is simple and easy to use and maintain.
4. The enclosed body can prevent dust.
Installation and maintenance
1. If the feeder is used for batching and quantitative feeding, it should be installed horizontally to ensure the uniformity and stability of feeding and prevent the self flow of materials. For continuous feeding of general materials, it can be installed with a downward inclination of 10 °. For viscous materials and materials with large water content, they can be installed with a downward inclination of 15 °.
2. After installation, the feeder shall have a swimming clearance of 20mm, which shall be horizontal horizontally, and the suspension device shall be connected flexibly.
3. Before the air test, all bolts shall be fastened once, especially the foundation bolts of vibration electromagnetic, which shall be retightened after 3-5 hours of continuous operation.
4. During commissioning, the two vibration motors must rotate in reverse direction.
5. During feeding, the stability of amplitude, current and noise shall be checked frequently during operation, and if any abnormality is found, the machine shall be stopped in time for treatment.
6. The electromagnetic bearing shall be filled with lubricating oil once every two months, and once a month in high temperature season.
