The electromagnetic vibration feeder used in the mine is a feeder in the general sense, and is also a necessary equipment for the implementation of flow process automation. It is used to supply materials evenly or quantitatively from the storage bin or other storage equipment to the receiving equipment, so as to avoid blocking of the receiving port of the crusher.
Operating principle of vibrating feeder:
This machine uses the eccentric block in the vibrator to rotate to generate centrifugal force, so that the movable parts such as the screen box and the vibrator can make a forced continuous circular or nearly circular movement. The materials are continuously thrown on the inclined screen surface along with the screen box, and the materials are continuously and evenly sent to the receiving port.
Application and characteristics of electromagnetic vibration feeder
Wide application: it has simple structure, convenient operation, no need of moistening, low power consumption, and can evenly adjust the ore feed. Therefore, it has been widely used in crushing and screening production lines of mines, gravel yards, metallurgy, building materials, chemicals, mineral processing, coal mines and other industries.
Performance characteristics: the machine is simple in structure, stable in vibration, uniform in feeding, good in continuity, adjustable in exciting force, capable of changing and controlling the flow at any time, convenient in operation, with eccentric block as the exciting source, low in noise, low in power consumption, good in adjustment performance, and free of material flushing. If a closed body is used, dust pollution can be prevented.
Manufacturing process of electromagnetic vibration feeder
It is generally used for loose materials. According to the performance requirements of the equipment, the pressure of materials on the tank body should be minimized in the configuration design. According to the requirements of the manufacturer, the discharge port of the bin materials should not be more than a quarter of the width of the tank, and the flow speed of materials should be controlled at 6-18m/min. For materials with large feeding amount, the ore blocking board of sufficient height should be set at the discharge place at the bottom of the bin, so as not to affect the performance of the feeder, The ore blocking board shall not be fixed on the tank body. In order to discharge the silo smoothly, the inclination of the rear wall of the silo is 55-65 degrees.
The electromagnetic vibration feeder not only uses grinding, but also can improve the working efficiency of the whole production line, which is your correct choice.
Small construction waste treatment plant: https://www.hxjiqi.com/art/20203582.html
Complete equipment of machine-made sand production line: https://m.hxjiqi.com/art/20182654.html
