brand Luoshi Machinery | Valid until Long term effective |
Last update 2024-05-21 15:09 |
Specifications Customizable |
Number of browses one hundred and ninety-nine |
Magnesium alloy die-casting oil temperature machine Customized high-temperature oil circulation mold temperature machine - Chengdu Luoshi
The customized magnesium alloy die-casting oil temperature machine is a kind of mold temperature machine, which is specially designed for magnesium aluminum alloy die-casting, and can solve the casting defects in the production process. The die-casting mold in the die-casting industry is much larger than the injection mold, and requires more power for heating and cooling.
In die casting production, the temperature of alloy solution is as high as 500~600 ℃, and the temperature of the die casting die should be stable between 100~300 ℃. At the same time, the hot runner of the die-casting die is relatively long, and the use temperature is high, so it is necessary to control the temperature. Most of them are high-temperature oil circulation die warmers, which use heat transfer oil to circulate between the die-casting die and the die warmers.
The aluminum die casting temperature of aluminum alloy is usually high, so that it exceeds the specified mold temperature. The traditional processing technology generally uses the plug-in heating tube to heat the mold, the mold temperature is uneven, and the actual effect is not very good.
As is known to all, in the process of die casting, the heat will dissipate and solidify after the alloy solution enters the mold cavity under pressure to obtain the die castings. If the heat dissipation is too fast, the die casting will have defects, and the heat dissipation is slow, which will increase the molding time of the die casting and reduce the productivity.
The best way is to choose magnesium alloy die-casting oil temperature machine to customize the heating mold. With the characteristics of high heat conductivity and good fluidity of heat transfer oil, the mold is heated indirectly from the inside to ensure that the alloy liquid fills the die-casting cavity according to the design requirements, and the surface is smooth and the contour is clear.
The control system turns on the heating element to heat the conduction oil. If the temperature is higher than the set value, the control system turns on the cooling element to cool the conduction oil. The equipment adopts automatic control mode, which can achieve good temperature control effect.