Cangzhou Kunlun Pharmaceutical Installation of Fiber Reinforced Cement Board Explosion Relief Wall Project
Cangzhou Kunlun Pharmaceutical Installation Fiber reinforced cement board explosion relief wall Project: The plates of the fiber reinforced cement explosion relief wall are relatively heavy, and at least two people are required to move the intact plates that are not cut. 4mm-6mm is a thin plate. Thin plates are fragile relative to thick plates. They need to be moved carefully before installation. If protection is not paid attention, they are easily broken and damaged. At least two people are required to install the fiber cement board, one to stabilize the board position and the other to fix it with special nails. Cutting fiber cement board usually requires electric saw or mechanical cutter, and there are three ways to cut it:
1. The thin plate can be cut and broken with a heavy cutter
2. Use fiber cutting machine
3. Thick or high-density plates need electric saw cutting
Pay attention to the wind direction during cutting the plate, try to avoid powder inhalation into the body, and wear a mask or special protective tools. After installation, it can be painted with various paints (waterproof paint is required for places exposed to the air). The joints of the fixed plates need to be filled with wooden blocks, and the entire surface of the plates needs to be painted, which can extend the service life of the plates. The fiber cement board that has been installed, fixed and painted has a small maintenance workload. Thick plates and high-density plates have good impact resistance, but thin plates and low-density plates need to be protected from external force impact.
