| model: | OP07EP |
|
| Rohs certification or not: | Non conformance |
| Lifecycle: | Obsolete |
| IHS Manufacturer: | ANALOG DEVICES INC |
| Part package code: | DIP |
| Packing instructions: | DIP, DIP8,.3 |
| Number of stitches: | eight |
| Reach Compliance Code： | not_compliant |
| ECCN code: | EAR99 |
| HTS Code: | 8542.33.00.01 |
| Risk level: | seven point eight two |
| Amplifier type: | OPERATIONAL AMPLIFIER |
| framework: | VOLTAGE-FEEDBACK |
| Maximum average bias current (IIB): | 0.0055 µA |
| Maximum bias current (IIB) at 25C: | 0.004 µA |
| Minimum common mode rejection ratio: | 106 dB |
| Nominal common mode rejection ratio: | 123 dB |
| Frequency compensation: | YES |
| Maximum input offset voltage: | 130 µV |
| JESD-30 code: | R-PDIP-T8 |
| JESD-609 code: | e0 |
| Length: | 9.27 mm |
| Low maladjustment: | YES |
| Upper limit of negative supply voltage: | -22 V |
| Nominal negative supply voltage (Vsup): | -15 V |
| Number of functions: | one |
| Number of terminals: | eight |
| Maximum operating temperature: | 70 °C |
| Minimum operating temperature: | |
| Packaging body material: | PLASTIC/EPOXY |
| Encapsulation code: | DIP |
| Encapsulation equivalent code: | DIP8,.3 |
| Package shape: | RECTANGULAR |
| Packaging form: | IN-LINE |
| Peak reflux temperature (° C): | two hundred and forty |
| Power Supply: | +-15 V |
| Certification status: | Not Qualified |
| Maximum height of seating surface: | 5.33 mm |
| Minimum swing rate: | 0.1 V/us |
| Nominal wobble rate: | 0.3 V/us |
| Subcategory: | Operational Amplifier |
| Upper limit of supply voltage: | 22 V |
| Nominal supply voltage (Vsup): | 15 V |
| Surface mounting: | NO |
| Technology: | BIPOLAR |
| Temperature class: | COMMERCIAL |
| Terminal surface layer: | Tin/Lead (Sn85Pb15) |
| Terminal type: | THROUGH-HOLE |
| Terminal pitch: | 2.54 mm |
| Terminal location: | DUAL |
| Maximum time at peak reflux temperature: | thirty |
| Nominal uniform gain bandwidth: | 600 kHz |
| Minimum voltage gain: | one hundred and fifty thousand |
| Width: | 7.62 mm |
|
