Shaoguan manufacturer produces steel mesh skeleton polyethylene composite pipe service, steel mesh skeleton polyethylene water supply pipe

The same connection joint should be used for the same pipeline system. Electric fusion joint should be used for buried pipeline. When flange joints are used, corresponding anti-corrosion measures shall be taken for the flanges and fasteners according to the soil conditions of the site. The transition joints between the steel mesh skeleton plastic (polyethylene) composite pipe and other pipes of different materials shall adopt the matching connection joints provided by the pipe manufacturer

Storage and transportation: Pipes and pipe fittings shall be stored in a well ventilated warehouse or covered shed, and the ambient temperature shall not exceed 40 ℃. It should not be stored in the open to prevent direct sunlight and exposure. Attention shall be paid to fire safety, and the distance from the heat source shall not be less than 1m. When pipes need to be stored in the open air, measures should be taken to prevent direct sunlight and exposure; Pipe fittings shall not be stored in the open air.
Pipes shall be stacked horizontally on a clean and flat site, and bending of pipes shall be avoided. The height of each side shall not exceed 1.5m, and anti rolling and anti collapse measures shall be taken. Pipe fittings shall be stacked layer by layer, and the stacking height shall not exceed 1.2m.

Electric fusion connection: the high temperature generated by the electric heating element embedded in the inner or outer wall of the contact surface at the connection after power on is used to weld the contact surface into a whole. The connection methods include socket type and sleeve type.