What problems should be paid special attention to in the application of SEW reducer

What problems should be paid special attention to in the application of SEW reducer

The different industrial equipment of SEW reducer should have different operation methods in the whole process of application. From the commodity level such as worm gear reducer, it can be learned that the problems of several levels in the whole process of application of commodities should be paid more attention to, so that the products can have very ideal practical effects, Therefore, it is important to master several parts of the whole process of caring about commodities.

In the whole process of understanding the goods of SEW reducer, it becomes a very important part that the goods can not be loosened at the installation level, and it should be taken into account in the specific rotation direction. From the perspective of the overall placement time, it is also critical to have stronger manipulation on the specific return time, so that we can master a large number of products.

Therefore, we can learn from the SEW reducer that it is very important to maintain the product continuously throughout the application process. In addition, we should also pay attention to the fact that the overall temperature level can be more manipulated and must be taken into account. In this way, we can learn more about each level of the product after learning more about several parts.

In the modular design composition design scheme, SEW reducer has new scientific and technological elements. SEW reducer has parallel plane keying, strong practicability, compact structure, large torque of transmission system, daily task shaking, low tone and long life. The destination of the secondary coil output keyed in to rotate the overall target is reversed. The application maintenance is convenient, and the maintenance cost is low, especially the consumption line. Only a number of external transmission system components must be reserved to cover all the normal consumption maintenance of the line. Because of the basic principle of modularization of module structure after careful production and processing, small quantities of parts and inventory have been improved and delivered in a short period of time. High transmission efficiency, low energy consumption and complete functions. High rigidity pig iron shell with ribs; Hard gears are made of high-quality carbon steel. After nitriding heat treatment, cutting production and processing, the transmission system is protruding, with low noise, large bearing capacity, low temperature rise and long service life. In addition, this product series adopts a new type of airtight installation, with good maintenance characteristics and strong compliance of the natural environment, which can achieve the goal again in the natural environment such as etching, wet and cold, and ensure the quality characteristics of commodity use.

The oil leakage of SEW reducer is one of the common problems of gear reducer. It's a headache. How to manage the oil leakage reasonably is a problem worthy of concern. Whether the flow back of the gear reducer is smooth is also a key factor for oil leakage of the gear reducer.

The SEW reducer is designed to make the oil that is likely to leak flow to the car oil tank relatively and stably. For example, the oil splashed on the inner cavity of the car oil tank must return to the oil pool in the car oil tank as soon as possible, so that the gear becomes smaller in the inner cavity of the rear cover plate, resulting in an arc shape., In order to avoid oil retention on the water pump seal. In order to better avoid oil leakage to the outside of the housing along the axle shaft, the axle shaft uses oil groove type sealing equipment. An oil groove is opened below the oil groove. The oil accumulated in the oil groove can return to the car oil tank body to avoid leakage.

Whether many SEW reducers can operate safely under such high temperature conditions and relevant heat removal countermeasures. Next, I will briefly introduce several heat removal methods of hard tooth surface reducer.

When the SEW reducer is in operation, the operating temperature of lubricating grease shall not exceed 90 ℃ in general. If the temperature is too high, the chemical and physical properties of the oil will change. For example, the viscosity of the grease is reduced and the bearing capacity of the grease film is reduced, which is likely to cause direct contact of the journal during work and produce the journal plywood. The specific methods for several types of heat removal of hardened gear reducer are as follows.

1. Of course, refrigeration

If the general shell can not meet the heat removal requirements, heat removal and heat transfer tubes can be added outside the shell, and the installation of heat removal and heat transfer tubes should be based on the air energy water heater as well as the circulation system.

2. Fan refrigeration

If it is not possible to meet the needs only with the help of the shell, the fan can be used for refrigeration.

3. Cooling water

The oil pool of the SEW reducer is equipped with an annular tap water pipe, which is generally made of copper or red copper, and is full of cooling circulating water, which will take away a part of the wind heat of the grease.

Basically, the heat removal form of SEW reducer includes students' natural cooling, fan cooling and cooling water. The working mode of heat removal is different, and the application function of equipment is also different.