Advantages of multi-functional fogwood landscaping solution:
1. The equipment system includes power failure protection and water shortage protection, which can supply water independently and protect against water shortage, thus ensuring the normal operation of the equipment.
2. The equipment will not be limited by the size of the site, because the fog making equipment is laid in a humidified environment, so the equipment host can be placed freely.
3. The powerful function of the device determines its versatility. It can not only be used for humidification and cooling, but also for outdoor dust suppression.
4. The characteristics of high-pressure spray technology are that it can produce large amount of fog, and the fog particles are small, which can support large-scale artificial fog operations.
5. The equipment is highly integrated, easy to maintain, and simple to operate, which can be applied to multiple places.
6. The humidification and cooling machine is well made, and each module adopts industry technology, which can solve customers' worries and bring you a different use experience.
7. The humidification effect of the equipment is uniform, and the area of action is large. One equipment can drive hundreds of nozzles, with low consumption per unit area and good cooling effect.
Application diagram of artificial fog making system
Multi functional fogwood landscaping solution Precautions:
Special attention shall be paid to the installation, setting, maintenance and inspection of artificial fog making equipment. If no protective elements are installed or the controller control mode is set in the manual state, the waterless power off inductive switch will not protect the humidifier.
1. If the working pressure of artificial fog is higher than 100psi, please check whether the nozzle is blocked. For troubleshooting, please clean the nozzle and replace the nozzle filter element.
2. If the working pressure of artificial fog is lower than 80psi, please check whether the water source is sufficient, whether the filter is blocked, whether the pipeline is leaking, and whether the atomizing nozzle is worn, and eliminate the possible conditions.
3. If water dripping is found on the water pump head of the artificial fog host, it may be caused by the wear of the seal water ring of the water pump head. The reason is that the water seal is not effectively cooled when the pump is idling without water, and the water seal is worn after being heated and expanded under high pressure. In this case, in addition to replacing the sealing water ring, pay attention to whether the water free power off inductive switch element of the protection host has been installed and connected to the controller, and check whether the connector of the loosened inductive element is reconnected and fixed.
High pressure atomizing nozzle
4. Replace the lubricating oil (SAE30) every 250 hours or 2 months for the artificial fog host, and maintain and clean it with other components and make records to keep the host in good condition and the humidification system running smoothly. Please replenish the lubricating oil at about 7 minutes full of the window, and clean the exhaust hole of the exhaust screw. If the lubricating oil is milky white, please check whether the cylinder chamber oil seal is worn and replace it immediately.