-
Reinforcement design drawing of open spandrel stone arch bridge This bridge is an open spandrel stone arch bridge reinforcement design drawing, which includes bridge type layout drawing, abutment reinforcement design drawing, arch ring reinforcement design drawing, sidewalk overhanging design drawing, bridge deck pavement design drawing, sidewalk railing design drawing, detailed design drawings of various parts -
Cad design drawing for reinforcement of open spandrel stone arch bridge This bridge is an open spandrel stone arch bridge reinforcement design drawing, which includes bridge type layout drawing, abutment reinforcement design drawing, arch ring reinforcement design drawing, sidewalk overhanging design drawing, bridge deck pavement design drawing, sidewalk railing design drawing, and detailed design drawings of various parts -
Construction Drawing Design of Three span Clear Multi arch Open spandrel Stone Arch Bridge 1. The bridge width is 30m=6.25+8+1.5+8+6.25. There is a 1.5m separation strip in the center, a total of 16m two-way four lane, 6.25m sidewalks on both sides, and underground pipelines are laid as empty boxes below. 2. The midspan span of the bridge is 35m, the arch ring is 140cm thick, the rise span ratio is fo/Lo=1/3, and the catenary arch axis coefficient is m= -
Construction design drawing of Guangdong U-shaped abutment open spandrel stone arch bridge 01 Description 02 Quantity table of the whole bridge 1-30m Arch bridge calculation sheet 03KZA0+030.00 Layout plan of stone arch bridge 04KZA0+030.00 Layout plan of stone arch bridge type o05KZA0+030.00 General structural drawing of stone arch bridge abutment 06KZA0+030.00 Coordinate map of pile position of stone arch bridge abutment 0708KZA0+0 -
Full set of construction drawing design of three span clear multi arch open spandrel stone arch bridge (20+35+20m) 1. The bridge width is 30m=6.25+8+1.5+8+6.25. There is a 1.5m separation strip in the center, a total of 16m two-way four lane, 6.25m sidewalks on both sides, and underground pipelines are laid as empty boxes below. 2. The midspan span of the bridge is 35m, the arch ring is 140cm thick, the rise span ratio is fo/Lo=1/3, and the catenary arch axis -
Construction drawing of 1-16m open spandrel stone arch bridge A complete set of construction drawings of 1-16m open spandrel stone arch bridge. The bridge is an open spandrel stone arch bridge with a clear span of 16m. The total length of the bridge is 27.38m. The bridge type is an open spandrel stone arch bridge with a clear span of 16m; Design load: highway Class II; Bridge deck width: net 3.6+2 × 0.4m guardrail -
Reinforcement design drawing of 5x8m open spandrel stone arch bridge This bridge is the reinforcement design drawing of the 5x8m open spandrel stone arch bridge, which mainly includes the layout of the reinforcement bridge type, the structural drawing of abutment reinforcement, the structural drawing of reinforcement of the main arch ring, and the structural drawings of various details of the part above the arch -
Reinforcement design drawing of 1x36m open spandrel stone arch bridge This bridge is the reinforcement design drawing of 1x36m open spandrel stone arch bridge. The drawings mainly include the layout of reinforcement bridge type, structural drawing of abutment reinforcement, structural drawing of reinforcement of main arch ring, structural drawings of various details of upper arch, etc -
Reinforcement design drawing of 1x22m open spandrel stone arch bridge This bridge is the reinforcement design drawing of 1x22m open spandrel stone arch bridge. The drawings mainly include the layout of reinforcement bridge type, structural drawing of abutment reinforcement, structural drawing of reinforcement of main arch ring, structural drawings of various details of the part above the arch, etc -
Construction drawing of 60m open spandrel stone arch bridge in Yiliang, Yunnan This bridge is designed to cross the Zhongming Luoze River in Yiliang County. The measured water surface elevation is 679.471m, the water surface width is 41.1m, and the longitudinal slope of the bridge deck is 0%. In order to facilitate the drainage of the bridge deck, the cross slope of the bridge deck is set at 3%, and a 60m stone arch span is designed. The main arch is the normal arch, and the elevation of the springing lines on both sides is the same. Arch according to catenary of constant section -
Design drawing of open spandrel stone arch bridge in Yiliang County 2、 Technical standard: (I). Design load: automobile - Class 15, trailer - 80. （2） Clear width of bridge deck: clear 7+2 × 0.75 m sidewalk. 3、 General layout of the bridge: the bridge is designed to span xx County. The measured water surface elevation is 679.471m, the water surface width is 41.1m, and the longitudinal slope of the bridge deck is 0%. In order to facilitate the drainage of the bridge deck, the cross slope of the bridge deck is set as -
Construction drawing of an open spandrel stone arch bridge in Hengyang City, Hunan Province This project is a bridge reconstruction project in Yongfeng Town, Shuangfeng County. In this design, the bridge is a 2-30m open spandrel stone arch bridge with a total length of 83m. The upper structure is catenary and other section plate arches, and the lower structure is gravity pier, U-shaped abutment and expanded foundation. Drawing content: drawing directory, bridge location map, general design specification, bill of quantities, bridge type layout -
Design drawing of an open spandrel stone arch bridge with a span of 30m This drawing is an open spandrel stone arch bridge with a span of 30m, including the layout plan of the bridge, abutment design drawing, arch span design, railing design and web arch design. -
[Zhejiang] Complete set of construction drawings of 1-16m open spandrel stone arch bridge (16 sheets) Design points: the structural system of this design is non hinged arch masonry structure, which is designed as cast-in-place components. The design calculation adopts the plane bar structure calculation software Dr. Bridge, and the buildings on the arch do not participate in the structural stress. Bridge type scheme: the superstructure of the general layout is an open spandrel stone arch bridge with a clear span of 16m, and the clear rise height is 3.0 -
[Guangdong] Construction design drawings of U-shaped abutment open spandrel stone arch bridge (complete set) Location: Guangdong Compilation time: 2008 Serviceability: road bridge span size and multi span total length: 30m Carriageway location: load-bearing component stress of deck bridge: service life of arch bridge: permanent bridge material type: reinforced concrete bridge data catalogue 01 Description 02 Quantity table of the whole bridge 1-30m Arch bridge calculation sheet 03 KZA0 -
All drawings of stone arch bridge with span of 1-50m This data is all the drawings of the stone arch bridge with a span of 1-50m, including the general structural drawing of K1+169 guardrail, the reinforcement structure of the bridge guardrail base, the anchor pier layout, etc., for reference. -
Construction Drawing of Classic Stone Arch Bridge This material is the construction drawing of a classic stone arch bridge in a certain place, including the vertical section of the stone arch bridge, the plan of the stone arch bridge, and the concrete arch ring. Welcome to download. -
Small stone arch bridge in Chinese courtyard Full set of CAD drawings of small bridges that can be installed in the courtyard -
Open spandrel reinforced concrete perforated plate arch bridge Open spandrel reinforced concrete perforated plate arch bridge -
Complete set of construction drawings of a single hole stone arch bridge This drawing is a complete set of construction drawings of a single hole stone arch bridge; Including: plan, elevation, 2-2 section, design description, etc; The design is standard and the content is detailed, which can be used for reference. -
Cad details of small stone arch bridge construction This project is a small stone arch bridge construction cad detail drawing, including the overall plan, elevation, section, reinforcement drawing, pier reinforcement, section, elevation, foundation plane railing detail, and boulder setting out drawing. The drawings are complete in content, clear in expression and precise in drawing. Designers are welcome to download and use them. -
Design and Construction Drawing of Antique Stone Arch Bridge This data is: the design and construction drawing of the antique stone arch bridge includes the masonry drawing of the main arch ring of the 13 meter span, the reinforcement drawing of the 1 # and 2 # piers, the arch bridge section drawing, etc. The design is accurate and the content is detailed, which can be downloaded by netizens -
Typical Design CAD Drawing of Stone Arch Bridge (1) This project is a typical design CAD drawing (1) of stone arch bridge, including elevation of arch bridge, typical design drawing of stone arch bridge and other drawings for designers' reference. -
Design reference drawing of a large stone arch bridge This project is a design reference drawing of a large stone arch bridge, including the elevation of Zhongming'an abutment, the layout and profile of Zhongming'an main arch abutment and arch approach abutment. The drawings are complete in content, clear in expression, and precise in drafting. Designers are welcome to download and use them. -
Complete set of construction drawings of pedestrian stone arch bridge (cad) This document is a complete set of construction drawings (cad) of pedestrian stone arch bridge, including plan, elevation, section, etc. The design is detailed and standard, and can be downloaded for reference. -
Complete set of construction drawings for pedestrian stone arch bridge This document is a complete set of construction drawings of pedestrian stone arch bridge, including plan, elevation, section, etc. The design is detailed and standard, which can be downloaded for reference. -
CAD Detail Structural Drawing of a Stone Arch Bridge Single hole stone arch bridge, including: plans, elevations and design instructions in all directions. The design is accurate and comprehensive, with detailed contents for reference. All designers are welcome to download~ -
Cad construction drawing of a garden stone arch bridge This document is the CAD construction drawing of a garden stone arch bridge, which includes the vertical section of the stone arch bridge, the plan of the stone arch bridge, the reinforcement drawing of the concrete base, etc. The design is detailed and standard, and can be downloaded for reference. -
Strengthening design of three span open spandrel concrete slab arch bridge Reinforcement measures for the bridge: ① pier and abutment foundation: the original foundation shall be grouted to improve the foundation bearing capacity. ② Arch ring: 1) Before reinforcement, roughen, remove loose parts and repair cracks, seal with epoxy resin, and then grout; 2) The main arch ring and web arch ring are strengthened by enlarging the section, that is, C40 reinforced concrete U-shaped hoop reinforcement technology; 3) Main arch ring soffit mining -
Construction drawing for reinforcement of 3x20 multi span open spandrel arch bridge The technical standards of the project after reinforcement are as follows: 1. Design load level: automobile - level 20. 2. Deck layout: 0.9m sidewalk (including 0.25m railing)+7.1m carriageway+0.9m sidewalk (including 0.25m railing)=8.9m. 3. Longitudinal and transverse slope of bridge deck: no longitudinal slope, transverse slope is 1.5%. The specific reinforcement measures are as follows: 1 -
Four sets of construction drawings of landscape stone arch bridge Notes: 1. Dimensions in this drawing: elevations are in meters, others are in millimeters; 2. Concrete strength grade: C20, C25; 3. Reinforcement: HPB235 steel for the first grade, HRB335 steel for the second grade, and the standard value of reinforcement strength has a guarantee rate of not less than 95%; 4. Net protective layer of reinforcement: foundation, without cushion: 70, arch ring, abutment coping: 3 -
Construction Design Drawing of 25m Stone Arch Bridge Drawing introduction: The downloaded drawings are a set of stone arch bridge design drawings. This bridge is a catenary arch bridge with a rise span ratio of 1/5. See the drawing for the arch axis coordinates of each section. The main arch ring masonry is made of M7.5 mortar laid 400 # block stones, and the maximum allowable compressive stress is 210Kpa. M10 mortar masonry stone is used for bridge railing post, and sawn wood (slate) can be used for handrail masonry -
CAD Planning Reference Drawing of Xiaoshi Arch Bridge This project is a CAD planning reference drawing of small stone arch bridge, including the general layout, stone arch bridge plane, stone arch bridge reinforcement profile, etc. The drawing is complete, clear and precise, and designers are welcome to download and use it. -
Cad construction details of single hole stone arch bridge in a community Construction details of a single hole stone arch bridge in a community: including plan, design description, section, section, foundation drawing, etc. -
Reference drawing of cad construction section of stone arch bridge This project is the reference drawing of the stone arch bridge cad construction section, including the bridge elevation, 1/2 arch stone and face stone location plan, elevation dimension drawing, foundation plan, middle pier section drawing, etc. The content of the drawing is complete, the expression is clear, and the drawing is rigorous. The designer is welcome to download and use it.
