-
Dust removal system fan dust remover ash silo and chimney foundation drawing The safety level of the building structure is Level II. The design safe service life is 50 years. The seismic fortification category of the building is Class C, the seismic fortification intensity is 6 degrees, and the design earthquake group is Group I. Design basic seismic acceleration value 0.05g -
Structure diagram of various general fan dedusting supporting air ducts Structural drawings of various general fan dedusting supporting air ducts. The drawings are the manufacturing and processing drawings of various air duct chutes for fans and dedusting. The manufacturing technology description: 1. Except the welds marked in the drawings, other welds are continuously welded by electric welding. The weld height is the thickness of the thinner steel plate in the two-phase weldment; 2. The manufacturing and installation shall be carried out in strict accordance with TP31-01; 3， -
General assembly drawing of JY13500 dedusting fan Note: 1. This drawing shows the right rotation outlet 0 ° and inlet 135 ° fan. 2. The dynamic load of the fan is 6090N. 3. The transmission case uses 46 # lubricating oil in summer and 32 # lubricating oil in winter. The oil consumption is 42L. Cooling water pressure ≤ 0.2MPa, dosage 0.5~1m/h, water temperature<30 ℃. 4. The pipe weight shall not be added to the fan body. 5. Liquid -
General drawing of converter primary dedusting fan Technical requirements for fan 1. The fan shall be subject to operation test on site. The continuous operation time shall not be less than 1 hour after the bearing temperature is stabilized. The bearing temperature and sound rise shall not exceed 40 ℃, the maximum surface temperature shall be less than 80 ℃, and the root mean square vibration speed at the fan bearing box shall not exceed 4.6mm/S2. The fan appearance quality and cleanliness shall comply with JB/T6886-93 -
Foundation reinforcement scheme of dedusting fan at tail 1. All the original encased concrete shall be chiseled away, and the old foundation shall be chiseled to the elevation of 1.2m, and the reinforcement shall be retained. 2. The contact surface reinforcement of new and old foundations is 14 * 300, arranged in quincunx shape. 3. C25.... Is adopted for equipment foundation concrete -
Reference drawing of metallurgical dedusting fan and foundation The dedusting fan is used to improve the air in the workshop and improve the air convection. The long pressure short extraction ventilation dedusting system is adopted, which can effectively realize the local purification of dust, especially for respirable dust with high dedusting efficiency. This drawing can be used for fan development and reference purposes -
Filter cartridge dust remover for shipyard (with fan) Filter cartridge dust remover (with fan) for shipyard, drawings include top fan, dust remover cylinder, pulse gas pipe, access door, etc! The filter cartridge dust remover contains various parameters with detailed contents, which can be used as a reference for environmental protection machinery designers! -
1010-4.2KNo11.5D dedusting fan Note: 1. This drawing shows a 45 ° right-handed fan. 2. The transmission case uses 46 # lubricating oil in summer and 32 # lubricating oil in winter. The oil consumption is 24L. 3. The dynamic load of fan rotor is 342N. 4. The pipe weight and expansion shall not be added to the fan body -
FBC48 blower reverse dust collector A reverse blowing dust collector, a reverse blowing dust collector, is mainly composed of fan (1), reverse blowing rotating arm (2), bag framework (4), pressure connector (5), air inlet (6), circular deflector (7), foot (10), U-shaped differential pressure gauge (12), bag (14), pressure pipe (15), shell (16), air outlet (17), gear (19), etc -
General drawing of primary dedusting fan of 120t converter General drawing of primary dedusting fan for 120t converter (D3000-15WXQX). Primary dedusting is to remove large particles of dust by gravity during steelmaking converter smelting. It is carefully drawn by AUCAD2004. Welcome to download and study if you need it -
Single machine 112 bag type dust remover with fan This is a CAD drawing of pulse single precipitator. The drawing can be opened with CAD2008 or above. The dust remover adopts the technology of low pressure pulse valve and Venturi tube filter bag by bag injection, which has the advantage of high dust removal rate, especially its online dust removal feature, which can make the dust remover run continuously and overcome the shortcomings of the original mechanical rapping shutdown. Widely used -
Pile foundation and foundation construction drawing of dust remover and fan 1. Design service life of the structure: 50 years. 2. Project overview: the total height of the building is 16.07m. 3. Structural system: the project adopts steel frame structure. 4. Relative elevation: indoor ± 0.000 of the project is equivalent to absolute elevation, see the general drawing. 5. Drawing unit: all elevations are in meters, and all dimensions are in millimeters; All dimensions in the drawings of this project are as shown in the drawing -
General assembly drawing of 1.25 million air volume dedusting fan Fan performance parameter table Speed r/min 730 Flow m3/h 1250000 Total pressure Pa 4300 Atmospheric pressure Pa 101000 Medium temperature ℃ 50 Medium density kg/m 1036 Shaft power KW 1816 Moment of inertia kq. m6600 -
Dust remover, fan and chimney pile design 3. The drawing is in mm and the elevation is in m. The design relative elevation is ± 0.000, which is equivalent to the elevation of the Yellow Sea of 16.500 m. 4. The setting out of this pile position shall be carried out uniformly after rechecking according to the requirements of the foundation plan. Before construction, it is necessary to find out whether there are obstacles below and remove them. 5. The design diameter of the pile body is 600mm, and the bearing layer of the pile tip is the sixth layer -
PPCS96-8 Dust Collector and Fan Chimney System This drawing provides a set of PPCS96-8 dust remover and fan chimney system drawings. The supporting dust remover model is PPCS96-8, with a filtering area of 940 ㎡. This system includes dust remover, fan, chimney, and the system pipeline of fan and chimney dust remover. This drawing is drawn by CAD1:1, which can be edited and used for reference by dust removal related industries -
DMC90 pulse stand-alone dust remover (including fan) DMC pulse single machine dust remover is a small bag dust remover designed by our company after digestion and absorption of similar products at home and abroad. The dust remover adopts the pulse jet ash cleaning method, which has the advantages of good ash cleaning effect, high purification efficiency, large air volume, long filter bag life, small maintenance workload, safe and reliable operation. Widely used in metallurgy, building materials, machinery, chemical industry, mining, etc -
Electrical drawing of primary dedusting fan room This manuscript is the electrical drawing of the primary dedusting fan room. The contents include: electrical equipment layout of primary dedusting fan room, PLC system configuration diagram, cable tunnel and cable corridor lighting plan, electrical room protection grounding plan, fan room chimney lighting diagram, interlocking signal circuit diagram, flux feeding cable bridge layout plan, flux feeding piping diagram, lift pump circuit -
Schematic diagram of 1.5 million air volume fan and dust remover Scheme drawing of 1.5 million air volume fan and dust remover, the motor power is 3000 kW, the rated air volume of the fan is 1.5 million m3/h, the filter area of the dust remover is 25000 m2, and the filter wind speed is 0.9 m/s. Welcome to download and learn if necessary. Thank you -
1.1 million air volume fan and dust remover schematic diagram 1.1 million air volume fan and dust remover schematic diagram, including general layout, fan diagram and dust remover diagram, etc. The dust remover has 1.1 million air volume, and the fan and motor are used equipment with 1.35 million air volume. Welcome to download and learn from friends in need, thank you -
Layout of newly added primary dedusting fan 1. Before assembly, all pipes shall be free of flash, burr and chamfer. Use compressed air or other methods to remove the sundries and floating rust attached to the inner wall of the pipe. 2. The parts and components (including purchased parts and outsourced parts) to be assembled must have the qualification certificate of the inspection department before assembly. 3. The parts must be cleaned before assembly, without burrs, flash -
Connecting pipe diagram of thin oil station and elevated oil tank of a dedusting fan 1. After the installation of the system, the pipeline must be purged, and the gas tightness test of the pipeline must be carried out, and the acceptance shall be carried out according to the Code for Acceptance of Construction Quality of Industrial Metallic Pipeline Engineering GB50184-2011; 2. The construction unit shall, according to the relevant requirements of Code for Construction of Industrial Metallic Piping Engineering GB50235-2010, purge and dry the pipeline after welding -
General drawing of RJ65-DW3100F tertiary dedusting fan 1. This is the general assembly drawing of 135 ° inlet and 0 ° outlet of the left cyclone. 2. Before leaving the factory, the fan rotor shall be balanced according to JB/T9101-1999 standard. 3. All parts of the fan shall be inspected for manufacturing and assembly as per Q/JTLD013-2001 -
6KNo24F converter secondary dedusting fan (690000 air volume) JY1350-6KNo24F converter secondary dedusting fan (690000 air volume) This is the general assembly drawing, including technical requirements, details, etc., which is carefully drawn by AUTOCAD2000. Welcome to download and study if you need it. Thank you -
800000 air volume refining furnace dust remover and fan 1. Processed air volume: 800000 (m/h) 2. Gas temperature:<100 ℃ 3. Inlet dust concentration: 8 (g/Nm) 4. Outlet dust concentration: 15 (mg/Nm) 5. Filter area: 11530 (m) 6. Filter wind speed: 1.15m/min 7. Net filter wind speed: 1.25m/min -
Fan foundation drawing of 2x120t converter tertiary dedusting system 1. The width of the motor and bearing walkway is 1000, and railings shall be set around. 2. The motor and bearing need to be designed with rain cover for easy maintenance. 3. See 0.000 layout plan for fan location. 4. All foundation bolts of the fan shall be put into the reserved holes of the fan foundation together after being fixed with the fan, and then the secondary grouting shall be carried out -
Electrical CAD control design drawing of fan in a dedusting system The electrical control design drawing of the fan of the dedusting system, the detailed drawing of the CAD plan and elevation and the renderings are fully planned. The monomer is consistent with the general layout, and the corresponding relationship between each other is accurate. There is no mistake, omission, or missing in the drawing. Welcome to download. -
Dust cleaning device of flat card fan reverse blowing bag filter The back blowing soot cleaning method is also called back blowing airflow or back pressure soot cleaning method. In this way, the system of working in different rooms is often adopted. The valve is used for automatic adjustment to generate and filter airflow in the direction of airflow room by room. The back blowing dust cleaning method is mostly of internal filter type. Due to the effect of reverse airflow and reverse pressure, the reverse wind speed and vibration will be generated, which will cause the deposited dust layer to fall off. Since it is of internal filter type, the filter shall be properly adjusted -
Dedusting fan motor coupling drawing Y4-73No25F Provide a large high-pressure dust removal fan Y4-73No25F, with a flow of 400000~530000 m3/h, 4700~6000pa, YKK560-61120kW, 6kV, 960 rpm. This drawing is drawn by 1:1CAD and can be edited. It can be used as a reference for design and learning colleagues -
DMC180 pulse single deduster (including fan, wall plate folding) This equipment has been put into use for your reference. DMC pulse single machine dust remover is a small bag dust remover designed by our company after digestion and absorption of similar products at home and abroad. The dust remover adopts the pulse jet ash cleaning method, which has the advantages of good ash cleaning effect, high purification efficiency, large air volume, long filter bag life, small maintenance workload, safe and reliable operation. Widely used -
Layout of electrical equipment in dedusting fan room Electrical equipment layout of primary dedusting fan room, PLC system configuration diagram, cable tunnel and cable gallery lighting plan, electrical room protection grounding plan, fan room chimney lighting diagram, interlocking signal circuit diagram, flux feeding cable bridge layout plan, flux feeding piping diagram, lift pump circuit diagram, gallery and process main section lighting plan, typical circuit diagram of oil unloading pump, swirl flow -
Construction drawing of electrical transformation of dedusting fan room in a steel plant This drawing is the electrical construction drawing for the transformation of the dedusting fan in the steel plant. There is no change in the civil engineering part, and some new equipment has been added. Including electrical control schematic diagram of electric butterfly valve, electrical control schematic diagram of electric blind valve, electrical control schematic diagram of oil pump and oil station heater. It contains the secondary wiring diagram, which can be referred to when doing related work -
Foundation construction drawing of small dedusting fan Ash silo of fan deduster Notes: 1. ± 0.000 is determined on site in this drawing. 2. The bearing capacity of chimney foundation foundation shall not be less than 150Kpa. 3. The cushion concrete is C15, and the foundation concrete is C25.4. The unspecified reinforcement is Q12 * 2005. See the relevant specifications for the unspecified special items -
Drawing of dust remover and shaft furnace exhaust fan [PPC64-5, Q=20000, MC80, Q=6000] 2 × 16 ㎡ shaft furnace project exhaust fan, 1 bag type dust collector, 10 bag type dust collectors on the top of the silo are the equipment that separates dust from flue gas, called dust collector or dedusting equipment. The performance of the dust remover is determined by the amount of gas that can be treated, the resistance loss when the gas passes through the dust remover and the dust removal efficiency -
Electrical automation of tertiary dedusting fan (1.35 million air volume) Notes: 1. Cabinet color: B04, silver gray, plastic spraying, wrinkling, matt paint 2. Cabinet material: 2mm steel plate 3. The structure of the double door is shown in the figure. The outer door 650 × 700 (not affecting the line of sight) is inlaid with tempered glass, and the internal and external doors are locked. The specific specifications and models are determined by the cabinet manufacturer. The gap between the double doors is 60 ± 5mm 4. The incoming holes are equipped with equivalent specifications -
Cad drawings for electrical design of primary dedusting fan room Electrical equipment layout of primary dedusting fan room, P includes: LC system configuration diagram, cable tunnel and cable corridor lighting plan, electrical room protection grounding plan, fan room chimney lighting diagram, interlocking signal circuit diagram, flux feeding cable bridge layout plan, flux feeding piping diagram, lift pump circuit diagram, corridor and process main section lighting plan, and typical circuit diagram of oil unloading pump -
Electrical equipment layout of primary dedusting fan room This document is the layout of electrical equipment in the primary dedusting fan room for your reference! -
General assembly and parts drawing of 60t converter primary dedusting fan General assembly and parts drawing of primary dedusting fan of 60t converter. This is the general assembly drawing of primary dedusting fan of a steelmaking plant, including a complete set of parts drawings, such as bearing bush, water seal, coupling, etc., which are elaborately drawn by AUTOCAD2004. Welcome to download and learn from friends in need. Thank you -
Electrical CAD equipment layout of a dedusting fan room The electrical equipment layout of the primary dedusting fan room, the CAD plan and elevation detail drawing and renderings are fully planned. The monomer is consistent with the general layout, and the corresponding relationship between each other is accurate. There is no mistake, omission, collision or defect in the drawing. Welcome to download. -
Three times of general assembly drawing of 1 million m3 air volume dedusting fan 1. This drawing shows that the left cyclone of the 135 ° outlet 10 ° fan at the inlet of the right group is inversely manufactured according to the drawing. 2. The fan shall be balanced according to JB/T9101 standard before leaving the factory. 3. All parts of the fan shall be inspected for manufacturing and assembly as per Q/JTLD013, and the whole machine must pass the pre assembly inspection. 4. The lubricating oil shall be GB11120, and L-TS in winter -
Textile mill dust removal system design, photovoltaic energy storage power station design, fan selection, dust suppression transformation, etc The contents include: installation requirements of reverse osmosis equipment, design of dust removal system of textile factory, analysis of causes of dust exceeding the standard in coal handling system of thermal power plant and dust suppression transformation practice, selection of aeration fan for sewage treatment and energy consumption analysis, analysis and treatment of causes of ash blockage in air preheater of circulating fluidized bed boiler, and design of 1MW off grid photovoltaic energy storage power station on user side
-
one Dust removal filter material -
two Pipeline dedusting -
three Dust removal design -
four Fan coil -
five Sewage fan -
six Fan selection -
seven Coil fan -
eight Box type fan