Latest formwork acceptance specifications and standards

2002 Latest Quality Acceptance Specification

Quality acceptance specification

List of latest building codes and standards

Standard name: Pricing code with bill of quantities of construction works Daylighting design standard for buildings Classification standard for seismic fortification of building engineering Technical code for seismic strengthening of buildings Design code for seismic resistance of buildings Design code for seismic resistance of buildings Partially revised Design code for lightning protection of buildings Evaluation standard for green buildings Design code for sound insulation of civil buildings General rules for design of civil buildings Climate classification standard

Code for Fire Protection Acceptance Chongqing Local Standard

This document is: Code for Fire Protection Acceptance - Chongqing Local Standard. The contents include: scope, terminology, general rules, general layout and plane, space layout, etc. The content is detailed and can be used for reference.

Standardized procedures and acceptance specifications for sterile rooms

Standard procedures and acceptance specifications for aseptic room The aseptic room is usually a small room in the microbiological laboratory. Color steel plate and tempered glass shall be used for construction. The area should not be too large, about 5-20 square meters, about 2.5 meters high. A buffer room shall be set outside the aseptic room, and the door of the buffer room and the door of the aseptic room shall not face the same direction, so as to avoid air flow bringing impurities

Ventilation and air conditioning acceptance code latest published

The ventilation and air conditioning acceptance specification just implemented in 2017, I hope it will be helpful to everyone.

The latest technical standards and quality acceptance specifications for landscape engineering construction

The latest technical standards and quality acceptance specifications for landscape engineering construction - practical and commonly used

Intelligent project acceptance specifications and standard forms

Intelligent project acceptance specifications and standard forms

Key points of formwork construction supervision and acceptance standards

This data is the key points and acceptance standards of formwork construction supervision, in word format, 7 pages in total. Contents: 1. Formwork installation preparation 2. Formwork installation deviation 3. Support stability 4. Formwork deformation control 5. Formwork removal time and sequence 6. Column formwork erection

Standard for quality acceptance of roof works 2012 latest

Standard for quality acceptance of roof engineering GB50207-2012. pdf, the latest national standard.

The latest safety and civilization acceptance standards in Wuhan,

The latest safety and civilization acceptance standards in Wuhan, Hubei Province, are all in Word. Please download them and feel that they are practical. thank you...

The latest edition of Standard Specification for Construction Quality Acceptance of Building Engineering

Wooden curtain box is an important part of family decoration, and an important facility for concealing hidden ends of curtains. In the design of suspended ceiling and window cover, matching curtain box design should be carried out to improve the overall decorative effect.

All electrical construction acceptance specifications

All electrical construction acceptance specifications are quite complete, which are WORD versions. It is very practical to be a friend of construction

Code and standard for construction quality acceptance of steel structure

Very good specification, providing standards for steel structure processing and acceptance

The latest flood control standards and specifications in 2019

National standard of the People's Republic of China, for reference

Standard template of Shaanxi's latest labor agreement contract

Party B has carefully read and fully understood the contents of this contract and its annexes, and promises that its understanding of the contract terms, annexes and the contents of Party A's rules and regulations is consistent with that of Party A

Detailed documents of technical specifications and acceptance standards of a region

This document is a detailed document of technical specifications and acceptance standards of a region. The content of the document includes: construction period objectives, quality objectives and other documents. The design is detailed and can be used for reference.

Code for Quality Acceptance of Building Decoration Engineering (latest)

Code for Quality Acceptance of Building Decoration Engineering (latest) 50210 Code for Quality Acceptance of Building Decoration Engineering 50210 Code for Quality Acceptance of Building Decoration Engineering 50210 Code for Quality Acceptance of Building Decoration Engineering

Standard template for minutes of main structure acceptance meeting (2018)

This document is a standard template for the minutes of the main structure acceptance meeting, with 6 pages in total. Data overview: The evaluation of the main works is as follows: since the commencement of the project department on August 5, 2017, the on-site raw materials: all of them are tested to be qualified before use, the raw materials of building # 1: there are 15 pieces of steel bar factory certificates, and 15 pieces of retest reports, all of which are qualified; Cement factory certificate 5 in total

Standard-GB50168-92_Code for construction and acceptance of cable lines

The standard - GB50168-92_Code for construction and acceptance of cable lines, which is detailed and rich, can be downloaded by netizens.

Unified design, construction and acceptance specifications Engineering construction standards

2005 Latest Standard Specification for Construction Quality Acceptance of Building Engineering

According to the requirements of the Notice on Printing and Distributing the 1998 National Standard Formulation and Revision Plan for Engineering Construction (the second batch) (JB [1998] No. 244), the Unified Standard for Construction Quality Acceptance of Building Engineering, which was jointly revised by the Ministry of Construction and relevant departments, was approved as a national standard by the relevant departments, with the number of GB50300-2

The latest GB50261-2017 Code for Construction and Acceptance of Sprinkler Systems

This specification is applicable to the construction, acceptance and maintenance management of automatic sprinkler systems installed in industrial and civil buildings.

2、 Acceptance standard for actual measurement of ordinary concrete structure formwork engineering

1、 Acceptance standard for actual measurement of ordinary concrete structure reinforcement works 1. Index description: reflect the quality of reinforcement connection, installation and construction. 2. Acceptance standard: (1) mesh size of binding reinforcement: allowable deviation 20mm (2) spacing of binding stirrups and transverse reinforcement: allowable deviation 20mm (3) main reinforcement shall not be cut at will

The latest construction quality acceptance standard of steel structure engineering

The new standard adds the contents of cable structure and membrane structure, which has practical guiding significance for construction and quality acceptance, and hopes to be helpful to everyone.

Genuine Code GB51440-2021 Cold Storage Construction and Acceptance Standards

Genuine Code GB51440-2021 Cold Storage Construction and Acceptance Standards

GB50092 Code for Acceptance of Asphalt Road

This specification is applicable to asphalt pavement works of newly-built and reconstructed highway, urban roads and factory and mine roads

Shandong Fire Alarm Acceptance Specification

DB37/242-2004 Code for Acceptance of Fire Alarm

Wang Shui Lecture: Construction and Acceptance Specification

According to the requirements of the Notice on Printing and Distributing the Formulation and Revision Plan of Engineering Construction Standards and Specifications in 2008 (the first batch) (JB [2008] No. 102) issued by the Ministry of Housing and Urban Rural Development

Vocs emission standard 2014 latest

Vocs emission standards: emission types, emission limits, emission rates, etc. (implemented in a few cities in 2014 and issued by the state in 2015)

Code for construction and acceptance of fire alarm

General rules of specifications, construction, system commissioning, system acceptance

Latest Integrated Wastewater Discharge Standard

Latest Integrated Wastewater Discharge Standard

Building decoration specification and acceptance specification

Code for Construction and Acceptance of Building Decoration Floor Paving Engineering 1. General Provisions 1.1 This chapter is applicable to the construction of paving and installation of ground surface of stone (including artificial stone), floor tile, solid wood floor, bamboo floor, solid wood composite floor, laminate floor, carpet and other materials. 1.2 The floor pavement should be completed in the concealed works, ceiling works and wall plastering works

Reference codes and standards for air conditioning design

Reference codes and standards for air conditioning design

National standards for sanitary acceptance

At present, there is no standard for sanitary acceptance of central air-conditioning projects. The latest national guidance document is issued by the Ministry of Health in 2006. Please take it if necessary.

Russian building codes and standards

Russian building standards | Russian building codes Russian building standards translation | Russian building codes translation Harbin Duowen Translation Company provides professional Russian building codes translation, Russian building standards translation and other Russian translation services; Russian architecture translation hotline: 13936441832 www.eyufanyi.com.cn

Compilation of acceptance specifications for decorative materials!!

Decoration material acceptance specification!

Code for construction and acceptance of spherical storage tanks

GB50094-98 Code for Construction and Acceptance of Spherical Storage Tanks

Code for Acceptance of Air Conditioning and Ventilation Construction

This document is the acceptance specification for air conditioning and ventilation construction. It is clear and can be used for reference. Welcome to download it.

Acceptance standard for residential decoration

This document is the acceptance standard for residential decoration, which contains complete and detailed contents, and can be downloaded by designers for reference.

Standard practice of Zhongtian formwork engineering

Clarify the standard practice of formwork engineering, improve the measured quality and appearance quality of the main structure, so as to improve customer satisfaction with the project quality.