-
Elevator installation scheme for a project Project construction elevator installation scheme Project construction elevator installation scheme, see the annex for details -
Installation scheme of elevator for project construction Project construction lift installation scheme Project construction lift installation scheme, see the appendix for details -
Construction scheme of an elevator installation project The elevator scaffold installed in the hoistway is different from the general scaffold, and should meet the following three requirements: the scaffold must be safe and reliable, with a bearing capacity of not less than 2.5 kN per square meter, and the total weight of the entire height of the scaffold cannot be concentrated at the bottom, but should be loaded in the middle section. Scaffold shall not interfere with all operations of elevator installation from top to bottom. -
Construction scheme for elevator installation of a project The construction scheme of elevator installation for a certain project is the garage of 1 # building, which is a frame and shear wall structure floor. The overall floor height is 3.7 meters, and the local floor height is 6.2 meters. The maximum section of the beam is 300 × 2050 mm. This beam is a smaller part of the garage, of which the beam section dimensions are 500 × 850 mm and 350 × 750 mm, which are common -
Construction organization scheme of an elevator installation project The main construction process of the project is as follows: template frame installation and datum line hanging → guide rail frame and guide rail installation → machine room mechanical equipment installation → counterweight installation → lift car installation → landing door installation → hoistway mechanical equipment installation → wire rope installation → electrical device installation → whole machine commissioning -
Construction scheme and method of elevator installation engineering After the arrival of elevator parts, the installer shall cooperate with Party A and the supervisor to carry out unpacking acceptance at the construction site based on the sales contract, technical specifications and product packing list. -
Construction organization design scheme of an elevator installation project The main structure of the project is divided into two parts: the central main building and the podium in the north and south wing areas. The elevator shaft is a reinforced concrete frame structure, with a total of 17 elevators and escalators installed. -
Construction organization scheme for elevator installation works of high-rise buildings Elevator installation engineering materials shall be provided by professional elevator manufacturers. After the elevator enters the site, we will organize the construction unit, the supervision unit and other relevant personnel to jointly carry out unpacking inspection of elevator goods and keep records -
Construction organization design scheme of elevator installation project The total height of the cable-stayed bridge is 66m, and the whole cast-in-place structure above the ground has an earthquake fortification intensity of 8 degrees. In order to meet the needs of on-site construction personnel, the project decided to install a SCD200/200 elevator at the site, with a total height of 69 meters. The foundation of the tower crane elevator is a concrete slab foundation. -
Construction Scheme for Outdoor Elevator Installation Works of Residential Project The SCD200/200 construction lift is a single guide frame, double cage, and gear bar type lift. The lifting cage is divided into left and right cages. The lifted personnel and materials are put in the lifting cage. The lifting cage has its own balance weight, which is arranged at the front and rear sides of the guide rail frame. The lifting cage and the balance weight are connected by the steel wire rope around the sheave. Each lifting cage is equipped with a set of driving mechanism. On drive mechanism -
[Jinjiang City] Hospital Relocation Project Construction Elevator Installation and Demolition Scheme Installation process: base → ladder cage → placing counterweight → the first section (4-6 sections) of guide rail bracket → upper limit and upper limit travel switch touch iron → the first attachment (correction) → Cable conductor wire protector → the second section of guide rail →...... → the last attachment → the installation of the last part of guide rail → upper limit and upper limit travel switch touch the iron → crown wheel → counterweight installation → material platform erection → protective door -
Construction organization design scheme of elevator installation project in a residential building The type and quantity of elevators in this project are 8 passenger elevators. The form and size of the hoistway is 2400X2300 for closed hoistway. The form and size of the machine room is 3200X4900X2400 for upper machine room. Two sightseeing elevators without machine room are not included in the scope of this project. -
Construction organization design scheme for elevator installation of an office building construction project in Beijing The dynamic system adopts the form of dual motor drive, so that the gear rack is evenly stressed, and the operation is safe and stable -
[Inner Mongolia] International Hotel Fire Elevator Installation Project Construction Scheme There are two fire elevators in this project, the model is HGP-1050-C0150; The installation of some elevator fire ladders began on July 15, completed on August 30, and two fire ladders were provided for use on September 5. -
Construction organization design scheme for elevator installation project of a family home building in Xi'an High tech Zone Elevator equipment cargo storage and secondary transportation. Before the elevator packing box is transported to the construction site, Party A shall provide a temporary turnover site with sufficient area for unloading and transfer -
Construction Scheme for Plumbing Installation Works Water heating scheme -
Construction scheme of water and electricity installation works Construction scheme of water and electricity installation works -
Construction scheme of an air conditioning installation project This document is a construction plan for an air conditioning installation project. The content is comprehensive and detailed, which can be used for reference and exchange. -
Construction scheme of an electrical installation project This data is the construction scheme of an electrical installation project, which includes low-voltage power distribution, lighting, lightning protection and grounding works, and can be used for reference. -
Construction scheme of a hydropower installation project The main work contents of this hydropower installation project include: lighting works of buildings (structures), lightning protection (grounding) works, indoor water supply and drainage works (see Chapter 16 for outdoor drainage works) and fire protection works. -
Construction Scheme for Airport Installation Works With the development of economy and the increase of national investment in infrastructure, airport construction will become the focus of national investment. This paper introduces the construction technology of terminal electrical installation engineering, terminal weak current installation engineering, terminal water supply and drainage and fire fighting pipeline engineering, terminal ventilation and air conditioning, and heating engineering. -
Construction scheme for weak current installation works Scheme name: construction scheme of weak current installation engineering This construction scheme of weak current installation engineering is rich in pictures and texts, which is of great reference value. For reference, the following is part of the contents -
Construction scheme of a chemical installation project Construction scheme of a chemical installation project Construction scheme of a chemical installation project Construction scheme of a chemical installation project -
Method Statement for Boiler Installation Works This document is the construction scheme of boiler installation project. The contents are detailed for reference. -
Construction scheme of a fire protection installation project The project is located in the city, at the intersection, with a total construction area of 6140.00 ㎡, which is determined for commercial use. The fire resistance rating of the basement of the project is Grade I; The commercial part is a high-rise building with a fire resistance rating of Grade I; The tower is a class I high-rise public building with a fire resistance rating of Class I; Automatic sprinkler system is set in commercial and garage. -
Construction scheme of electrical installation works The construction scheme of electrical installation works is rich and detailed, and can be downloaded for reference and study by netizens. -
Construction scheme for installation works of a project Concealed piping on the wall shall be laid in the wall along with masonry. During piping operation, the riser shall be about 200mm away from the box, and then the box shall be stabilized. Connect the short pipe again and put it in place at one time. The upper end of the pipe should be long enough to enter the ceiling at 90 degrees. For cast-in-place reinforced concrete internal piping, the pipeline shall be laid within two layers of reinforcement, and bound with adjacent reinforcement with binding wire -
Construction Scheme for Door and Window Installation Works The construction scheme of the door and window installation project includes that the villa area of the Country Garden Project in Chengdong New Area was explored by Dongtai Zhongcheng Design and Research Institute Co., Ltd. and designed by Guangdong Boyi Architectural Design Institute. Supervised by Nanjing Xuguang Construction Supervision Co., Ltd. It was constructed by Guangdong Tengyue Construction Co., Ltd. The structural form of the project is frame structure, and the building area is 1 complex building, 1 high-rise building, G216 -
Construction scheme of a plant installation project The construction scheme of a factory installation project is rich and detailed, and can be downloaded for reference and study by netizens. -
Construction scheme of a mechanical and electrical installation project This document is the construction plan of a mechanical and electrical installation project, which is detailed and can be downloaded for reference. -
Construction Scheme for Installation Works of a Water Plant The construction scheme and technical measures are prepared according to the relevant contents of the construction drawing. If there are other items in a project (such as excavation, paint anti-corrosion, pipeline installation of the same material), it is generally not necessary to repeat. -
Construction scheme of a glass installation project Construction scheme of a glass installation project Construction scheme of a glass installation project Construction scheme of a glass installation project -
Construction scheme of a hospital installation project Construction scheme of a hospital installation project Construction scheme of a hospital installation project Construction scheme of a hospital installation project -
Construction scheme of hospital installation works Establish a lean, efficient and sound project team, implement the ISO9001 quality management mode, and carefully organize and construct to ensure that the project is completed with high quality and efficiency within the specified duration. The project manager is the commander and responsible person of the project. It shall be fully authorized by the legal representative of the company. The technical director is responsible for the management of daily affairs on site, and the organization is as follows. -
Construction scheme of electromechanical installation works This document is the construction scheme document of mechanical and electrical installation engineering. It is a detailed document for reference -
Construction Scheme for Installation Works of a Hotel The XX Hotel project invested and constructed by XX Real Estate Development Co., Ltd. is located at XX Road, XX District, XX City. The main body of the project is a frame structure, with one basement floor and six floors on the ground. The basement is the hotel auxiliary equipment room and garage, and some areas of the basement are Grade VI civil air defense facilities; Some areas on the first and second floors above the ground are meeting rooms, banquet halls, hotel catering and entertainment rooms -
Detailed construction scheme of elevator installation works The commissioning must be carried out after the installation of equipment in the machine room, hoistway and pit is qualified, and the introduction of three-phase five wire power supply by the owner is qualified. The material preparation before commissioning shall be complete: commissioning instruments, commissioning tools, special auxiliary materials for commissioning, etc. can be commissioned only after they are well prepared. -
Construction Scheme for Electrical Installation Works of a Hotel This construction plan is prepared for the construction of the hotel business district project and is a programmatic document for guiding the construction of the electrical discipline. It is applicable to the whole construction process. The purpose is to ensure the quality, quantity and duration on the premise of reasonable economy and reliable technology. -
Construction scheme of air conditioning installation project in a certain place Cleaning steps: remove the floating dust on the steel plate surface before seaming → degrease with trichloroethylene cleaning agent after the combined forming of seaming → clean with neutral cleaning agent → scrub with clean water&nbs -
Construction Scheme for Street Lighting Installation Works The following process is adopted in the construction: fixed lamp position → trenching → pipe burying → pouring street lamp foundation → laying cable → insulation test → street lamp installation → electrical equipment installation → experiment and commissioning → self inspection → completion acceptance
-
one Construction scheme of electromechanical installation works -
two Construction scheme of municipal installation works -
three Construction Scheme for Shield Installation Works -
four Construction Scheme for Tower Crane Installation Works -
five Construction Scheme of Power Installation Works -
six Construction Scheme of Hotel Installation Works -
seven Construction Scheme for Canopy Installation Works -
eight Construction scheme of comprehensive installation works