-
Construction scheme of elevator power supply transformation project Construction Scheme and Cable Laying Scheme for Elevator Power Supply Reconstruction Project of Expert Apartment Building 2 of South University of Science and Technology -
Demolition construction scheme of balcony for retrofitting residential building with elevator Project overview Project name: Project location: Haidian District Construction content: II. Service and care In order to ensure that the construction process does not affect the normal office order of other units, we are required to strictly implement various management systems, environmental and safety protection measures, to ensure construction safety and avoid environmental pollution. The measures are as follows: 1. Keep communicating with Party A's leaders and principals -
Construction scheme for reconstruction of fire elevator and door opening of a project Since Party A has not determined the elevator manufacturer and the elevator model is unknown before, the positions of the door openings of A16, A17 and B11 elevators are also uncertain. Tower A and B are constructed to the 14th floor (including the 14th floor) according to the original drawings. During the construction, the steel bars are bound according to the positions marked in the original drawings, and no concrete is poured. Now, according to the owner's instructions, design changes and site conditions, the elevator door opening is modified. -
[Lanzhou] Special Scheme for Personnel and Goods Construction Elevator of Overall Reconstruction Project Class I high-rise is composed of 30 floors and podium commercial building is composed of 3 floors. Among them, the underground four storey integrated garage. The total building area is about 53168.39 m2. Building 5 # of Plot 7 consists of the main building and the podium building. The standard floor above the ground of the main building is a symmetrical left and right unit. The elevation below -16.550 is connected as a whole, and the above is an independent structural unit. Building of left and right units -
Word for construction scheme of fire elevator and door opening reconstruction of a project 1.1 Main standards, specifications, procedures and reference materials 1.1.1 Technical Code for Safety of Construction and Installation Engineering 1.1.2 Technical Code for Safety of Work at Heights in Building Construction (JGJ80-91) 1.1.3 Standards for Safety Protection, Plant Appearance Hygiene, Environmental Protection and Fire Protection of Construction Site DBJ01-83-2003 -
Construction Scheme for Elevator Reconstruction Project in the Plant Area of Xinjiang Xinhua Company The construction site of this project is very narrow, and there are many production equipment, line network and pipeline network around. During the construction period, it is necessary to ensure the normal production, and protect the safety of production equipment and personnel. For this safety requirement, the purpose of our project is to "ensure safety protection first, and then ensure safe production". Safety measures: to ensure the safety of construction and production -
Special construction scheme for reconstruction of elevator hall of unit residence Reserved hole: 1.7m long and 1.7m wide. The floor slab is 200mm thick and is a precast reinforced concrete structure. Two layers of rebar with diameter of 12 are laid. Floor protection (floor cleaning) → pouring of support foundation → laying of protective layer (formwork) → drilling of large surface with water mill → cutting of circular saw edge → local manual chiseling → site cleaning. -
Special construction scheme for elevator transformation of a unit residential building 1. Materials: rebar, concrete, channel steel, etc; 2. Mechanical equipment: water grinder, rebar processing machinery, circular saw, electric welding machine, etc; 3. Personnel: welder, mechanic, carpenter. -
Construction Scheme of Elevator Reconstruction Project in a Xinhua Company's Plant Area in Xinjiang Mechanical equipment preparation: one cage construction elevator and one mixer are expected to be set at the construction site, and the rebar processing machinery such as butt welding machine, cutting machine and bending machine will be set at the rebar processing area according to the conditions of the construction site; The woodworking shed is equipped with a circular saw, a circular plane, etc. -
Construction scheme of protective frame for elevator shaft reconstruction project of Juhong Thermal Power Plant The project is located in Juhua Thermal Power Plant. The elevator shaft 20m~49m was originally a steel structure, which was transformed into a concrete frame structure. In order to ensure safe construction and the safety of personnel and property, our project department has formulated a construction scheme for the protective frame in combination with the actual situation of the project. -
[Chengdu] Substation auxiliary room elevator shaft reconstruction construction scheme The main project of production auxiliary room of Nanjiao Substation of Chengdu Electric Power Bureau was completed on February 4, 2013, and the elevator unit entered the site in November 2013. The elevator unit entering the site is different from the manufacturer providing elevator parameters (drawings) during the structural construction. Party A replaced the elevator manufacturer (brand), resulting in the reservation, embedded parts and new elevator manufacturer according to the previous drawings provided by the elevator manufacturer -
Construction scheme for reinforcement and reconstruction of a school Main processes: carbon fiber cloth, steel bonding, steel wrapping, beam column section enlargement, rebar planting, cutting. -
Construction Scheme for Heating Transformation of Old Area Pipe prefabrication (1) The connection method of the pipe shall comply with the design requirements (2) Pipe cutting 1) Galvanized steel pipe shall be cut by mechanical method or manual sawing. 2) Pipe break: draw a line on the selected pipe according to the on-site sketch, and break the pipe according to the line. Original marks shall be transplanted before pipe cutting. -
Construction scheme of elevator for people and goods construction The elevator construction scheme for people and goods construction is detailed and rich, which can be downloaded by netizens.. -
Construction scheme of construction elevator foundation Construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme -
Construction scheme of roof waterproof reconstruction 1. Before construction, check the cracking, hollowing, flowing, edge warping, cracking, breaking, opening and damage of the original waterproof layer plane and facade, and check the leakage of cornices, gutters, parapets, ridges, water outlets, deformation joints, internal and external corners (corners), pipes protruding from the roof and other waterproof structures, and determine the removal sequence. 2. Remove the original waterproof layer and leveling layer a) -
Heating installation and transformation construction scheme Heating installation and transformation construction scheme -
Construction scheme of reinforcement planting No. Project Content 1 Project Name: Beijing xxxxxxxxx Project Lot C1 Structure Reinforcement Project 2 Project Location: 100 meters diagonally opposite to the government of xxxx Town, Haidian District, Beijing 3 Designer: Beijing xxxx Design and Research Institute Co., Ltd. 4 Supervisor: Beijing xxxx Supervision Co., Ltd. 5 General Contractor -
Construction scheme for system transformation of a steel plant Construction scheme for system transformation of a steel plant -
Roof reconstruction and maintenance construction scheme Project name: XX Sports School Removable Swimming Pool Supporting Facilities Project. Purchaser: XX Sports School. Purchase No.: NYZJJZ2017-9, WCPO No. 37. Quality requirements: meet the national engineering acceptance standards. After sales service requirements: meet national standards and specifications. Construction period: 20 calendar days. Capital -
Detailed construction scheme for elevator installation The elevator is a square standard section, manufactured by Shanghai Baoda Construction Machinery Co., Ltd., model: SCD200/200J. -
Detailed elevator installation construction scheme In this project, there are two elevators without machine room in the VIP lobby, with a load capacity of 1000Kg, three floors/three stations, and a design standard speed of 1.0m/s. The elevator power supply is directly supplied by A # transformer room in two ways, and the end of the two-way emergency power supply automatically switches to each other. -
Reconstruction construction scheme of an old building in Hangzhou This Bid is for Bid 3-5 of * * * * * Street Courtyard Improvement Project in * * * * District. If we are lucky enough to win the bid, it will also serve as the main basis for the formal construction organization design. We will make appropriate additions and amendments on this basis. The main contents of this bid include: comprehensive description, project overview, project management methods and ideas, main parts and sub items of the construction organization scheme -
Construction Scheme for House Reconstruction and Reinforcement 1. This project is the reconstruction project of Block D apartment in Tianjiao Garden, Machang Road, Tianjin. The building, built in 1997, is a four storey brick concrete structure with sloping roof. 2. The storey height of the building is 2.900m, and the structural elevation of the highest point of the roof is 14.120m. The building and roof are cast-in-place reinforced concrete slabs. 3. The seismic fortification category of buildings is Class C; The seismic fortification intensity is -
Formwork for construction scheme of vertical elevator (2) Before taking up the post, the safety technology training of the company's professional personnel shall be carried out, and the training records shall be kept, signed by the trainer and the trainee, and filed by the company. -
Construction scheme of electrical equipment transformation in a residential area 1、 1.1 Due to the continuous increase of electrical load in the base, and the aging of electrical equipment and lines. To ensure the safety of electricity use. Now, the original 315kva pole mounted transformer is dismantled. Install a 500kva pole mounted transformer in situ. The low-voltage part shall be modified according to the load requirements. 1.2 180 kva transformer of another power supply circuit -
Heating reconstruction construction scheme and requirements Content Introduction This project is an indoor and outdoor heating reconstruction project. This data includes two parts: the construction scheme of one valve for one heating household and the construction requirements for reconstruction of residential buildings, outlets and hot water outdoor lines. -
10kV cable reconstruction construction scheme The Xxxxxxxxxxxxxxx project occupies an original 10kV directly buried cable line of XXXXXXXXX, and the original cable has been broken during the construction process. The original cable line needs to be abolished, and the power supply needs to be temporarily connected to restore power supply. After the construction of XXXXXXXXXXXXX is completed, the cable will be re laid, and the pipe will be pulled through the railway road, highway and Tianjin Port Canal. -
Elevator installation construction scheme (example) Project Name XXXXXXXX Garden Project Location: No. 108, XXXX Road, Bao'an District, Shenzhen Elevator User: Shenzhen XXXXX Co., Ltd. Builder: Shenzhen XXXXX Construction Engineering Co., Ltd. Supervisor: Shenzhen XXXXX Supervision Co., Ltd. Contract No.: DT2008030015 Elevator -
Construction scheme for reconstruction of a heating pipe network Construction procedure The external network reconstruction project for heating of residential quarters under the jurisdiction of Hailong Industrial Corporation has been approved by Fuxin Development Planning Commission, with a project scale of 24428M, external heating pipelines and special funds allocated by the state. The construction content includes the installation of directly buried seamless steel pipe rigid polyurethane insulation pipe, installation of household unit well, valve, pressure gauge, thermometer, main pipeline valve -
Construction scheme for installation of construction elevator This document is the construction scheme for the installation of construction elevators. The contents are detailed for reference. -
Construction scheme for pipe network reconstruction in a factory The project is located in the factory, and the three supplies and one leveling have been completed. There are two pipelines in total, one nitrogen pipeline with a diameter of φ 273X8,; One gas pipe with diameter of φ 89X4. Nitrogen pipelines are laid overhead in the north-south extension wall, buried in the east-west direction, and all gas pipelines are buried. The pipeline is composed of seamless steel pipe, expansion bending, pipe support, etc -
Boiler reconstruction and installation construction scheme The 130 t/h cyclone boiler produced by XX Boiler Factory has been technically transformed into a 130 t/h bagasse boiler. The superheated steam pressure and temperature of the boiler remain 3.82 Mpa/450 ℃. Among the pressure parts of the modified boiler, the boiler drum, desuperheater, some water wall tubes, superheater tubes, and some economizer tubes -
Construction Scheme for Pedestrian and Freight Elevator Foundation This document is the construction scheme for the foundation of passenger and freight elevators. The content is detailed for reference. -
Special construction scheme for passenger and freight elevator The total construction area of the project is about 122915m2, consisting of 3 #, 5 #~13 # buildings and underground garage (garage area is 16042.45m2: divided into civil air defense area of 8732.7m2 and non civil air defense area of 7309.86). Except 8 # building (brick concrete structure) and 13 # building (frame structure), they are all shear wall structures, including 3 # and 5 # buildings -
Construction scheme for reconstruction and reinforcement of a house This project is the reconstruction project of Block D apartment in Tianjiao Garden, Machang Road, Tianjin. The building, built in 1997, is a four storey brick concrete structure with sloping roof. 2. The storey height of the building is 2.900m, and the structural elevation of the highest point of the roof is 14.120m. The building and roof are cast-in-place reinforced concrete slabs. -
Construction scheme of air conditioning transformation system According to the field survey, the central air conditioning of the office building of ABC Life Insurance on the 7th and 8th floors of Block C of the World Trade Center has been installed, and has been electrified and can be used. According to the items in the bidding list, we can see that the subdivisional works of the air conditioning reconstruction involve few quantities, and the construction is relatively simple, mainly to cooperate with the decoration works, add flexible interfaces and expansion joints -
Special construction scheme for shop reconstruction The shop reconstruction project mainly includes the following contents: finished product protection project, earthwork excavation project, ground hardening project, supporting measures and facility reconstruction project. -
Hospital reconstruction project construction scheme Project name: Xinjin County People's Hospital Reconstruction Project. Project location: Wujin Town, Xinjin County. Project scale: It is proposed to reconstruct the outpatient building, inpatient department, old office building, general layout greening and other ancillary facilities and build a new tumor treatment center. The building area is about 25000 square meters. -
Construction Scheme for Installation and Dismantling of Passenger and Freight Elevator The total building area of this block is 205000 square meters, including 7 high-rise residential buildings and 1 underground garage. The residential buildings are L1 #, L2 #, L3 #, L4 #, L5 #, L6 # and L7 # respectively. The residential building is a shear wall structure, with 28 floors above the ground and 3 floors below the ground. The floor height is 2.9m, and the maximum height of the building is 86m. CFG pile composite foundation treatment and foundation structure
-
one Construction scheme for elevator reconstruction and installation -
two Construction scheme for elevator hall door reconstruction -
three Elevator construction scheme for old building reconstruction -
four Hospital elevator reconstruction construction scheme -
five Construction scheme technology for elevator reconstruction -
six Construction scheme for elevator reconstruction of old building -
seven Construction scheme for elevator storey adding and reconstruction -
eight Method Statement of Swipe Card for Elevator Reconstruction