-
Construction safety technical disclosure for tower crane and other power machinery operators in construction engineering The ground of generator set room (shed) shall be kept dry, and no flammable and explosive materials shall be stored in the room (shed); Fixed unit must be installed on concrete foundation -
Technical disclosure of safe operation of milling machine This information is the technical disclosure of the safe operation of the milling and drilling machine. It is valuable and detailed for reference. -
Safety technical disclosure of excavator operation The disclosure contents shall comply with the general safety regulations of the construction site -
Safety technical disclosure of tower crane removal Contents of safety disclosure, targeted disclosure -
Safety technical disclosure of tower crane installation 1. Strictly abide by the rules and regulations formulated by the Project Department. 2. When entering the construction site, safety helmets and chin straps must be worn as required. 3. Smoking is prohibited on the construction site, and drinking is strictly prohibited. 4. Personnel entering the construction site must wear and use labor protection appliances correctly as required. 5. Civilized dress is required when entering the construction site. Shorts and slippers are strictly prohibited -
Safety technical disclosure of tower crane operation All constructors entering the construction site must first receive three-level safety education and training. Only those who pass the exam can take up their jobs. Those who have not received training or failed the exam are not allowed to take up their jobs. -
Technical disclosure of mixer operation safety 1. Operation shall be carried out with certificate, and special person shall be assigned for the machine; 2. The material must be cut in accordance with the requirements of mix proportion, and the water cement ratio must be strictly controlled; 3. Before starting the machine, check whether the machine operates normally, and report any problems found in a timely manner; 4. Loading, unloading and troubleshooting operations are prohibited before the machine stops stably. Power supply must be cut off when troubleshooting equipment; 5. After the completion of each day, it shall be cleaned in a timely manner -
Technical disclosure of safe operation of flat trailer This information is the technical disclosure of the safe operation of the flatbed trailer. It is valuable and detailed for reference. -
Technical disclosure of safe operation of down the hole drill This information is the technical disclosure of safe operation of down the hole drilling rig. It is valuable and detailed for reference. -
Technical disclosure for safe operation of dump truck This information is the technical disclosure for the safe operation of dump trucks. The information is valuable and detailed for reference. -
Technical disclosure for safe operation of winch This information is the technical disclosure of the safe operation of the winch. It is valuable and detailed for reference. -
Safety technical disclosure of operation platform The operation safety technical disclosure of the operation platform is detailed and rich, which can be downloaded by netizens. -
Safety technical disclosure of gas cutting operators The safety technical disclosure of gas cutting operators is detailed and rich, which can be downloaded by netizens. -
Form of safety technical disclosure for electric welding operation This data is a form of safety technical disclosure for electric welding operation, including: the clamp and handle wire must be well insulated and firmly connected, and gloves must be worn when changing welding rods. When working in a wet place, stand on an insulating rubber plate or wood board. It is strictly prohibited to weld on a pressurized container or pipeline. When welding live equipment, the power supply must be cut off first. -
Safety technical disclosure of tower crane driver (7 pages) This document is the safety technical disclosure of tower crane drivers (7 pages), including: data overview: tower crane drivers should be professionally trained, pass the examination according to the provisions of relevant departments and obtain the operation certificate, and be required to understand the working principle of operating tower cranes, be familiar with the structure of the machine, the role of each safety device and its adjustment methods, Master the operation method and maintenance technology of various properties of the machine -
Technical disclosure of safe operation of a winch This document is the technical disclosure for the safe operation of the winch. The document includes: during installation, the base should be stable and firm, the surrounding drainage should be unblocked, the ground anchor should be set reliably, and the work shed should be set up. The operator shall be able to see clearly the commander and the dragged or lifted objects. Before operation, check the fixation between the winch and the ground, and the elastic coupling shall not be loose. Safety devices and protective devices shall be checked -
Safety technical disclosure of electric welding and gas welding operation During commissioning of power transmission device system and high and low voltage switches, relevant switch handles shall be removed or locked, and signboards shall be hung to prevent false closing. When electrical materials or equipment need to be discharged, they should wear insulation protection articles and use insulating rods to discharge safely. No matter whether the high-voltage equipment for on-site power transformation and distribution is electrified or not, the single person on duty is not allowed to go beyond the barrier and engage in repair work. At high -
Safety technical disclosure of bridge erecting machine operation This document is the technical disclosure of the operation safety of the bridge erecting machine. The contents are complete and can be downloaded -
Technical disclosure of formwork worker's operation safety 1、 Access to the construction site must comply with safety operation procedures and safety production discipline, and special operators must work with certificates. 2、 Work according to the requirements of the formwork construction scheme. 3、 Persons who are deemed by doctors to be unsuitable for high-altitude operation shall not carry out high-altitude operation. 4、 Before work, check whether the tools used are firm, and the wrench and other tools must be tied to the body with a rope chain, -
Technical disclosure of basket operation safety Construction operation characteristics and hazard sources, specific control measures for hazard sources and safety precautions -
Safety technical disclosure scheme for tower crane installation Construction operation characteristics and hazard sources, specific control measures for hazard sources and safety precautions -
Safety technical disclosure of tower crane installation electrician 1. Electricians must hold electrician's special operation certificate, and can go to work only after passing the training and examination. During operation, they must wear personal protective equipment, and illegal operation and drunk operation are strictly prohibited. 2. Strictly abide by the operation procedures of the type of work, regularly check and test the electrical equipment (tools), and stop using the unqualified electrical equipment and tools. 3. No live working -
Detailed safety technical disclosure for tower crane installation 1、 Foundation: 1 According to the requirements of tower crane instructions, the excavation depth is 1.2m, the width and length are 5.5x5.5m, and the cushion layer is poured 10cm. 2. Bind Φ 16 ground grid and two 1.0x4m Φ 20 ground beams. 3. Pour and tamp C30 concrete. 4. The special fixed leg of the embedded tower crane is 65cm in the concrete and 35cm above the concrete surface. 5. Week -
Operation safety technical disclosure of a gas cutter 1. Gas cutting workers must hold a special work permit, and those whose work permit has expired but not been reviewed annually are not allowed to carry out welding operations; 2. Hot work approval procedures must be handled for welding operations; 3. Flammables and explosives shall be removed from the surrounding of the welding site, or covered and isolated, and fire-fighting equipment shall be provided at the welding site; -
Safety technical disclosure of tower crane dismantled.doc Safety technical disclosure for tower crane dismantled.doc Safety technical disclosure for tower crane dismantled.doc Safety technical disclosure for tower crane dismantled.doc -
Construction safety technical disclosure of tower crane project 1. Specially assigned person commands and cooperates with each other to ensure safe production; 2. Personnel working at heights shall strictly comply with safety technical specifications; 3. No idlers are allowed to stay in the installation and disassembly area; 4. Carefully check the steel wire sleeves and snap rings used for lifting and timely update them in strict accordance with the update standards; 5. Carefully check all connecting bolts and locking shafts, and change them in time in case of damage, fatigue and cracking -
Technical disclosure of derrick and passenger cargo elevator operation safety 3. The wire rope must be arranged neatly on the drum, and at least three circles must be reserved during operation -
Technical disclosure of safe operation of pneumatic riveting tools Before using all kinds of pneumatic tools, they should be soaked in gasoline, disassembled and cleaned to show metallic luster, and then wiped with dry cloth and cotton yarn before assembly. During assembly, the moving parts shall be dripped with proper amount of lubricating oil to keep the working mechanism clean and well lubricated. -
Technical disclosure of welder operation safety Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure Electric welder operation safety technical disclosure -
Safety technical disclosure of tower crane installation/disassembly works 1. Specially assigned person commands and cooperates with each other to ensure safe production; 2. Personnel working at heights shall strictly comply with safety technical specifications; 3. No idlers are allowed to stay in the installation and disassembly work area; -
Safety technical disclosure of tower crane installation and disassembly works 1. Specially assigned person commands and cooperates with each other to ensure safe production; 2. Personnel working at heights shall strictly comply with safety technical specifications; 3. No idlers are allowed to stay in the installation and disassembly area; -
Technical disclosure of safety operation procedures for forging and drilling machine 1. The foundation of the brazing machine should be firm, the surrounding ground should be flat and clean, and no objects unrelated to the operation should be placed within the scope of operation. 2. Before connecting the gas transmission pipeline, the accumulated water and dirt in the pipeline shall be purged. The gas transmission pipeline shall be placed at an appropriate position and the gas supply pressure shall meet the requirements. -
Technical disclosure of safe operation of deep well pump 1. The deep well pump shall use the clean water with the sand content less than 0.01%. The pump room shall be equipped with a pre moistening water tank, and the capacity shall meet the pre moistening water volume for one start. 2. For newly installed or overhauled deep well pumps, the clearance between pump casing and impeller shall be adjusted, and the impeller shall not rub against the casing during operation. 3. Before the operation of deep well pump, clean water shall be introduced into the housing of shaft and bearing for pre lubrication. -
Safety technical disclosure of tower crane installation (removal) project This document is the safety technical disclosure of tower crane installation (removal) project. It is valuable, detailed and can be used for reference.
-
one Technical disclosure of tower crane safety -
two Safety technical disclosure of tower crane disassembly -
three Safety technical disclosure of tower crane command -
four Safety technical disclosure of tower crane driver -
five Safety technical disclosure of tower crane attached to wall -
six Safety technical disclosure of tower crane foundation -
seven Safety technical disclosure of tower crane rigging -
eight Safety technical disclosure of operation platform