-
Design and construction of additional waterproof layer Send you an engineering data. It will be of great help to engineers and technicians. -
Practice and key points of roof waterproof lap and additional layer 1、 Base course treatment 11. During construction, the waterproof base course should be basically in a dry state, and the moisture content should be less than 9%. During construction, the waterproof base course should be in a dry state, and the moisture content should be less than 9%. Its simple measurement method is to cover the rubber sheet with an area of about 1 square meter and a thickness of 1.5-2.0 mm on the base course surface, and place it for 2-3 hours, such as the covered base course surface -
Record of roof membrane waterproof layer and additional layer The construction records of roof membrane waterproof layer and additional layer are detailed for reference -
Construction record of roof membrane waterproof layer and additional layer Unit (sub unit) project name, construction date, construction unit, supervision unit -
Construction record of a roof membrane waterproof layer and additional layer 1. Material quality 2. Dry and clean base course 3. Arc degree protruding from roof structure 4. Drainage slope -
Design and construction of additional reinforcement layer for waterproofing works Due to stress concentration and frequent deformation at some locations, the waterproof layer of construction engineering needs to be repaired at the end of its service life. Therefore, in the waterproof engineering design and construction -
GB50208-2002 Code for Underground Waterproofing GB50208-2002 Code for Underground Waterproofing -
Uploading several specifications on waterproof coiled materials GBT 23260-2009 Waterproof coiled material with self-adhesive layer GB 23441-2009 self-adhesive polymer modified asphalt waterproof coiled material GB 18967-2009 modified asphalt polyethylene tire waterproof coiled material -
Code for Acceptance of Underground Waterproofing Quality Code for Acceptance of Quality of Underground Waterproof Engineering GB50208-2011, November 30, 2011 -
Basement waterproof specification learning courseware In order to further adapt to the needs of underground engineering construction in China, promote the development of new waterproof materials and new technologies, improve the level of engineering quality management, and unify the quality acceptance code for underground waterproof engineering. -
Specification for spray polyurea waterproof coating This atlas is applicable to the specification of the construction process of spraying polyurea waterproof coating, including the requirements of the specification and cooperation. -
Record of roofing coiled material and additional layer The contents of roofing coiled materials and additional layers are detailed for reference -
Basement waterproof specification, commonly used to Basement waterproof specification, which is often used, can be learned more. Applicable to underground garage, etc -
Code for design of indoor waterproofing of residential buildings This specification improves the requirements for indoor waterproof design on the basis of national waterproof specifications, and further defines the requirements for waterproof materials, waterproof construction and acceptance -
Construction record of roofing coiled material and additional layer Unit (sub unit) project name, construction date, construction unit, supervision unit -
14 toilet waterproof construction specifications This document is an analysis of 14 toilet waterproof construction specifications, and its contents are for reference only -
Waterproof construction scheme of a 28 storey building The basement baseplate and exterior wall of the project are waterproof with the method of single layer 4mm thick SBS modified asphalt waterproof coiled material waterproof layer hot melt full paving. The lap width of coiled material is 100mm on the long side and 100mm on the short side. -
New specification requirements for fire pump materials According to the requirements of the new specification, the fire pump body shall be made of "nodular cast iron, and the impeller and shaft shall be made of copper or stainless steel". -
Construction Method of Tunnel Waterproof Isolation Layer Content introduction 1. Construction method and process requirements 1.1 The construction of waterproof layer shall be carried out using multi-functional work bench. 1.2 The waterproof layer shall be constructed before the deformation of the initial support is basically stable and the secondary lining is poured. The distance between the construction point and the blasting operation surface is greater than the blasting safety distance, and the distance from the pouring secondary lining is greater than 20m. 1.3 Construction sequence: laying first -
Relevant specifications and atlas of building waterproof construction and design This is the relevant specifications and atlas I collected when doing building waterproof construction and design practices, which has a good reference value for waterproof design and construction. -
How to Compile Waterproof in Technical Code of Roof Engineering How to prepare waterproof in the technical specification of roof engineering? The document is very detailed for you to download -
M2 roof coiled material and additional layer construction record 1. Quality of coiled material, 2. Drying and cleanness of base course, 3. Arc degree of protruding roof structure, 4. Drainage gradient -
Gbj108 Technical Code for Waterproofing of Underground Works This document is Gbj108 (Technical Code for Waterproofing of Underground Works), which is clear and can be used for reference. Welcome to download. -
Damp proof, waterproof and sound insulation structure between floor and ground The floor layer is the main horizontal load-bearing component of the building, which transmits the load to the wall, column and foundation. At the same time, it plays a horizontal constraint role on the wall and column. Under the horizontal load (wind, earthquake), it coordinates the horizontal displacement of each vertical component (column, wall); Strengthen the rigidity and integrity of the building; The floor layer divides the building into several floors along the height direction, and also plays a role in -
Standard specification for polyurethane waterproof coating Standard specification for polyurethane waterproof coating Standard specification for polyurethane waterproof coating Standard specification for polyurethane waterproof coating -
Waterproof treatment technology of anti floating anchor rod root in coastal engineering In the coastal area, the groundwater level is high and the water head pressure is large. The upper end of the anti floating anchor bolt penetrates the underground coiled material waterproof layer and is anchored into the foundation slab. The weak point of waterproof is formed. The systematic anti floating anchor rod root waterproof treatment technology in an office building project in Laoshan District, Qingdao is simple and continuous in operation, reducing the leakage probability of underground structures, improving the waterproof performance of underground structures, and reducing the -
Summary of provisions of waterproof and waterlogging prevention code for water supply and drainage discipline Summary of provisions related to waterproof and waterlogging prevention in relevant specifications for water supply and drainage of housing construction and municipal infrastructure engineering -
Requirements of New Fire Code for Fire Pump Certification According to the requirements for compulsory certification of fire products, after October 1, 2015, all fire pumps must have a CCCF compulsory certification fire pump CCCF certification certificate, which is reviewed and issued by the "Fire Product Conformity Assessment Center of the Ministry of Public Security". This certificate was not required before ------ now it is mandatory -
Code for quality acceptance of underground waterproof engineering Code for quality acceptance of underground waterproof engineering -
Technical Code for Waterproofing of Underground Works GB50108-2008 Technical Code for Waterproofing of Underground Works GB50108-2008 Technical Code for Waterproofing of Underground Works GB50108-2008 -
GJB 1941-1994 Specification for Gold Electroplated Coatings This document is GJB 1941-1994 Specification for Gold Electroplated Coating. It is detailed and practical. Welcome to download it for reference. -
Detailed Rules for Construction Supervision of Additional Waterproof Layer of Roof This document is the detailed implementation rules for the construction supervision of the additional waterproof layer of the roof. This article is very valuable for reference and is hereby shared for everyone to learn. The contents are detailed and can be downloaded for reference. -
GB50108-200 Technical Code for Waterproofing of Underground Works This document is GB 50108-2001 Technical Code for Waterproofing of Underground Works. The contents include: general rules, terms, etc. The content is detailed and can be used for reference. -
GB50108-2008 Technical Code for Waterproofing of Underground Works During the revision of the Technical Code for Waterproofing of Underground Works, the revision team, after extensive investigation, research and data collection, based on summarizing the practical experience of underground works waterproofing in recent years in China, referring to relevant international standards and widely soliciting opinions from relevant units throughout the country -
General Code for Waterproofing of Building and Municipal Engineering GB55030-2022 General Code for Waterproofing of Building and Municipal Engineering GB55030-2022 General Code for Waterproofing of Building and Municipal Engineering GB55030-2022 -
Technical Code for Waterproofing of Underground Works (12) GB50108-2008 Receive, send, send to, send to, send to, send to, send to, send to, send to Santa Fe -
GB50108-2001-SM Technical Code for Waterproofing of Underground Works GB50108-2001-SM Technical Code for Waterproofing of Underground Works -
Quality Acceptance Record of Steel Deck Waterproof Tack Coat Inspection Lot This data is the quality acceptance record of the inspection lot of the waterproof bonding layer on the steel bridge deck, which is detailed and can be downloaded for reference. -
NFPA20 American Fire Pump Design Code This specification introduces in detail the relevant requirements of fire stabilized pressure pump and fire pump, which is worth collecting for the personnel working on foreign projects. -
GB502082002 Code for Quality Acceptance of Underground Waterproof Engineering This document is GB502082002 Code for Quality Acceptance of Underground Waterproof Engineering, which contains complete and detailed contents, and is only for designers to download for reference.
-
one Specification for additional layers of waterproof coiled materials -
two Specification for additional waterproof layer of coiled material -
three Specification for raft waterproof additional layer -
four Specification for additional floor waterproof layer -
five Specification for additional coating waterproof layer -
six Code for additional waterproof layers of buildings -
seven Specification for thickness of additional waterproof layer -
eight Code for construction of additional waterproof layer