-
Interpretation of Louis I Kahn's Bangladesh Capital Government Buildings Through the analysis of the buildings of the Bangladeshi capital government, this paper interprets Louis Kahn's design philosophy and his design method of perfectly combining the functionality of the material elements with the spirit. -
Anchor rod static pressure pile technology in building construction This paper mainly discusses the anchor rod static pressure pile technology in the construction technology, mainly analyzes the common quality accidents in the construction, and then puts forward the main construction technical measures and construction control points. -
Safety technical disclosure of deep mixing pile construction of a building The reinforcement framework shall be fabricated in the reinforcement processing site, hoisted and connected on site. The reinforcement processing site must be flat and compacted, and the main reinforcement of pile foundation must be firmly welded. The joint of vertical main reinforcement and horizontal main reinforcement should be spot welded. If there are many main reinforcements, they can be staggered for spot welding and binding. -
Construction Scheme of Manual Digging Pile in Construction Site Before the construction of underground pipelines (pipes, cables), underground structures, dangerous buildings, precision instrument workshops, etc. in the construction site and adjacent areas, the relevant units and owners shall be jointly inspected in detail, and the special conditions of the original cracks of buildings (structures) shall be recorded for future reference. The adjacent buildings that may be endangered by the excavation and water pumping shall be reinforced in advance. -
Construction organization design of a highway bridge project (bidding) in Bangladesh The xx bridge project is located in the middle of xx, with the approximate longitude and latitude of 23 degrees 34 minutes north latitude/90 degrees 31 minutes east longitude. This area is under the jurisdiction of Munshiganji City (MUNSHIGANJZHILA) in the south of Dhaka, about 30km away from Dhaka. The north bank of the bridge site connects with the regional highway R812, and the south bank connects with the branch highway R8121, which is from the capital Dhaka to Mongolia -
Construction technology of pile caps for industrial and civil buildings This process standard is applicable to pile cap beams in industrial and civil buildings. -
Technical disclosure on construction safety of manually dug piles in school buildings Before each shift of operation, the accumulated water in the pile hole shall be drained, and the air blower or large fan shall be used to supply air to the hole for 5 minutes, so that the turbid air in the hole can be discharged before getting off. When the hole depth exceeds 10m, the ground shall be equipped with special equipment to supply air to the hole, and the air volume shall not be less than 25L/S. When drilling at the bottom of the hole, the air supply should also be increased; -
Design and construction of rigid flexible combined piles for a building The design and construction of rigid flexible composite piles for a building can be downloaded for reference...... -
Simple steps for construction coordinate conversion of building pile setting out The transformation of construction coordinates is shared with everyone, which also enhances my memory. 1. First, the building plane coordinate system drawings; 2. Open the drawing to be converted on the construction day; 3. Input the line "L" in the menu bar, which belongs to the point coordinates in the interface, first the Y axis coordinates, then the X axis coordinates, at least 2 points (diagonal points); 4. Check whether the coordinate marking of the converted 2 points is consistent with the drawing; -
Application and Construction Technology of Anti floating Pile in Underground Building Structure This paper introduces the application of anti floating piles in underground structures. The uplift bearing capacity shall be designed in accordance with the requirements of the national standard Technical Code for Building Pile Foundations and relevant tests shall be carried out in combination with the specific design grade. The selection of pile type shall be determined according to different geological conditions. To improve the bearing capacity of foundation piles, it is an effective method to use belled piles. It also details the permanence of underground structures during the service life -
CFG pile foundation treatment scheme and construction organization design of a rural building The proposed site was originally residential buildings and farmland, with flat terrain. The borehole elevation is 472.18~474.36m, and the maximum elevation difference is about 2.18m. The geomorphic unit belongs to Class III terrace ice water accumulation layer of Chengdu Plain -
Process pipeline installation scheme of a DAP unit in Bangladesh The process pipeline in Zone A of the project is about 22500m long, with a diameter between DN25 and DN1400. The materials include carbon steel (20 #, 16Mn), galvanized pipe, stainless steel pipe (316, UB6), steel lined rubber pipe, cloth clamp rubber pipe, glass steel pipe, on-site air duct, etc. See Table 1 for the physical quantities of the project. -
[Tianjin] Construction organization design of commercial building pile foundation The construction organization design is prepared according to the requirements of the bidding documents. The contents include the general overview of the project within the scope of preparation, construction plane layout and temporary facilities layout, labor plan, main management personnel of the project management team, construction schedule, construction schedule, construction period assurance measures, and main construction machinery; Equipment, construction scheme or method construction measures, new -
Construction pile and foundation works of building engineering Basic knowledge, list items, preparation of bill of quantities and list pricing -
Application of rotary excavation method in civil building pile construction With the gradual promotion and application of rotary drilling rigs in China in recent years, in the construction of domestic pile foundation projects, rotary drilling rigs are designated for more and more construction projects. -
Analysis on the mechanics of single pile with branch and disk piles in construction [Abstract] The branch and disk cast-in-place pile is developed from the bored cast-in-place pile, and has been used in nearly 100 projects in more than 10 provinces and cities in the past decade. The pile type can greatly improve the bearing capacity of the pile, with small load deformation, good seismic performance, and optimize the structural design scheme. This paper briefly analyzes and discusses the stress mechanism of single pile with branch and disk piles in construction. -
Production and installation scheme of crude oil storage tank for Bangladesh storage tank installation project The project involves the fabrication, installation, pressure test and accessory installation of 30000m3 floating roof oil storage tank. Its main structure is: inner diameter of oil tank: 46000mm; height of storage tank: 19350mm; storage medium: maximum level of diesel oil: 17850mm -
Construction Organization Design of Artificial Digging Pile for Super High rise Building The original geomorphic unit of the proposed site is river alluvial (slope) proluvial tableland landform, and the ground is relatively flat after manual excavation and leveling. The elevation of the borehole orifice in the detailed survey is between 7.15 and 8.72m, and the elevation difference is 1.57m. According to the field drilling exposure and indoor geotechnical test results, the strata distributed in the site are artificial fill layer (Qml), Quaternary Holocene series flood -
Reading architectural decoration construction drawings 1、 Architectural decoration construction drawings are drawings drawn on paper by designers with lines, numbers, words and symbols according to the projection principle, which are used to express design ideas, decorative structures, decorative shapes and finishing requirements. Architectural decoration construction drawing is the technical language of decoration construction and the basis for worker construction and project acceptance. Building decoration and decoration construction drawings include: plan and top surface -
On the safety of building construction Civilized and safe construction is becoming the voice of the times and the trend of the world. In this paper, the method of statistical theory is used to analyze the safety problems of building construction, so as to cause great attention in the construction process. -
Construction organization design of mountain buildings How to organize mountain construction -
Construction organization design of building electricity Example of preparation of construction organization design for electrical, water supply and drainage discipline of commercial and residential buildings -
Pile testing scheme before construction of powder jet grouting pile DJM pile construction is a new thing. I hope it can help you -
Building isolation structure and construction requirements Based on the difference between isolated structures and traditional anti-seismic structures in mitigating earthquake effects, this paper discusses some requirements of isolated structures in terms of structural measures, construction requirements, etc., so as to provide a reference for better ensuring the safety of building structures -
Underground waterproof construction management With the continuous rise of high-rise buildings, underground waterproofing is a very important systematic project, which will involve design, construction, material selection and many other aspects. -
Construction organization design of construction project The construction organization design of auxiliary works of housing construction such as pavement, retaining wall, site leveling and iron railings prepared according to the requirements of the bidding announcement -
Brief Analysis of Building Electrical Construction Management Combined with years of practical experience in electrical engineering construction management, this paper makes a deep analysis on the problems of electrical construction management in current construction engineering, and puts forward some opinions for your reference. -
Reinforcement and concrete construction of dug pile 1、 Preparation 1. When the pile hole is excavated to the soil quality required by the design, the residue at the bottom of the well shall be removed, and the design, survey, quality inspection and construction units shall jointly organize the acceptance of the pile hole. When the design requirements are met, the next process shall be carried out: lower the reinforcement cage and pour the pile core concrete. 2. Leakage blocking and ponding removal: before pouring concrete, the leakage on the concrete retaining wall shall be blocked in time, and then -
Construction organization scheme of building electrical This data is the first section of the electrical construction scheme of the building. The project has a building area of 12180.41m2, a building height of 23.9m, six floors, and a reinforced concrete structure. The power supply of the project is provided by xx power room, and the incoming line is divided into two paths for mutual standby. The corresponding main switch has been provided with a mechanical interlock device -
Reading construction drawings of building structures This material is for the reading of construction drawings of building structures. The main contents are as follows: 1. Reading of structural design instructions; 2. Reading of foundation plan; 3. Reading of beam, slab and column plan construction drawings; 4. Introduction to overall plan design methods of building structure construction drawings; 5. Introduction to plan construction drawings -
Building Electrical Training Part - Pictures and Construction This article describes the requirements and standards of on-site construction quality of building electrical engineering in the form of slide pictures. The construction is clear and the quality is effectively guaranteed. It is a good reference for beginners. -
Construction practice of manual hole digging pile Construction practice of manual hole digging pile construction practice of manual hole digging pile -
Seismic construction design of building structure Earthquake refers to the vibration of the earth's surface caused by the sudden release of energy slowly accumulated in the earth's interior. -
Construction scheme of a rural house relocation The preparation of the construction organization design for this bid has been highly valued and strongly supported by our company. The company has specially set up a bid plan team for this project, and adopted the preparation idea of "comparison and optimization, drawing on the strengths of all" to make this plan more focused, targeted and operable. -
Construction organization design of a mixing pile Construction organization design of a mixing pile Construction organization design of a mixing pile Construction organization design of a mixing pile -
Construction method of a deep mixing pile This data is about the construction method of deep mixing pile, including the basis for preparation, project overview, main construction technical scheme, etc., with accurate design and detailed content, which can be downloaded for reference by netizens.
-
one Construction piling machinery -
two Pull out test of building pile -
three Technical code for building piles -
four Building pile cap foundation -
five Summary of bored pile construction -
six Construction summary Rotary excavation pile -
seven Summary of rotary pile construction -
eight Summary of mixing pile construction