-
![[Luoyang] Construction Scheme for New Elevators of Commercial Residential Building 10](//g.co188.com/img/topics/new_topics/images/blank.gif)
[Luoyang] Construction Scheme for New Elevators of Commercial Residential Building 10 The elevator shaft of this project is a reinforced concrete shear wall with a total height of 106.7 meters and a thickness of 300 mm. Due to design changes, two elevators are added to the east of Building 10 # (see the figure below). When the design change occurs, the main body has been constructed to the 13th floor, and the tower crane of Building 10 # coincides with the elevator shaft. According to the requirements of the construction unit at that time, when the main building is completed, the tower crane -
Special scheme for construction elevator (multiple) A number of special schemes for construction elevators and derrick are of great help to friends engaged in construction and supervision. -
Reinforcement scheme of construction elevator roof Reinforcement scheme for top slab of construction elevator Building 1 #, Zhengzheng Hongyuyuan, Longhu, Xinzheng City, this project is a frame shear wall structure. There is one floor underground with a floor height of 3.8m, which is used as a parking and equipment room. When designing the outdoor roof of the basement, the roof reinforcement is 10@170 Double layer and two-way, plate thickness is 180; The elevator foundation design is 12@200 Double layer and two-way. -
Special scheme for elevator installation and removal Special scheme for elevator installation and removal, project overview, preparation before installation of construction elevator, installation process and method of construction elevator, acceptance and management of construction elevator -
Construction organization scheme for elevator installation The total height of the cable-stayed bridge is 66m, and the whole cast-in-place structure above the ground has an earthquake fortification intensity of 8 degrees. In order to meet the needs of on-site construction personnel, the project decided to install a SCD200/200 elevator at the site, with a total height of 69 meters. The foundation of the tower crane elevator is a concrete slab foundation -
Site supervision scheme for construction elevator This data is the construction elevator supervision site plan, in word format, 6 pages in total. Contents: 1. Project overview 2. Target control 3. Basis for safety supervision 4. Safety management procedures 5. Construction elevator supervision process 6. Safety supervision during construction 7. Responsibilities of on-site supervisors -
Foundation reinforcement scheme of construction elevator This document is the foundation reinforcement scheme of construction elevator, including: project overview: the project is located at the intersection of Jianshe Canal Road and Xinhu Canal Road, Jiang'an District, Wuhan City. The building area of buildings A and B of the project is 33102.96m2, including 649.16 m2 of commercial area and 32453.80 m2 of office area of each building; The underground area of the project is about 20000m2. -
Final version of construction elevator scheme_secret The operation center project of Shenzhen Stock Exchange is located in Lot 32-1-1, Futian Central District, Shenzhen, with Pengcheng 2nd Road to the east, Shennan Avenue to the south, Mintian Road to the west and Fuzhong 3rd Road to the north. The project has a total construction area of 267341.07 ㎡ and a total height of 245.8 m, which is a super high-rise office building. The main structure of the project is steel reinforced concrete frame -
Roof reinforcement scheme of a construction elevator In this project, two SC200 construction elevators are planned to be arranged on axes 14 and 23. The lift center line is 3200mm away from the outside of the wall; In order to prevent the construction elevator from passing through the basement roof and affecting the structural use function and waterproof effect of the basement roof when it is installed on the basement roof, our project will install the construction elevator on the basement roof, and the structure of the equipment is the frame -
Installation scheme of construction elevator in a city It is convenient for daylighting, with clear vision, and is equipped with an outside span cab. One side of the cage close to the building is equipped with an upper and lower double door or a flap door, and the other side is equipped with a single door to facilitate personnel access. -
Construction organization scheme for elevator installation The total height of the cable-stayed bridge is 66m, and the whole cast-in-place structure above the ground has an earthquake fortification intensity of 8 degrees. In order to meet the needs of on-site construction personnel, the project decided to install a SCD200/200 elevator at the site, with a total height of 69 meters. The foundation of the tower crane elevator is a concrete slab foundation. -
Scaffold erection scheme in elevator shaft The net size of the elevator shaft is 2130 × 2200mm. The structural construction elevator shaft wall formwork is fixed with plywood steel pipe fastener bolts. The elevator shaft is equipped with scaffolding from the bottom layer to the operating surface in sections. The total height of the bottom section scaffolding is less than 24m according to the conventional requirements. -
Layout plan of tower crane and elevator There are CAD layout plans, number and model of tower cranes, and number and model of construction elevators. -
Installation scheme of construction elevator for a financial plaza Preparation basis. Project overview. Construction preparation. Foundation design of construction lift. Installation of construction lift. Specific requirements for installation and removal. Safety assurance measures. Construction elevator installation organization structure. Attached drawings. Technical disclosure of safety operation procedures for passenger and cargo elevators. Personnel and freight elevator operation post responsibility system. Calculation sheet of foundation bearing capacity of construction elevator. -
Construction scheme of elevator for people and goods construction The elevator construction scheme for people and goods construction is detailed and rich, which can be downloaded by netizens.. -
Foundation reinforcement scheme of external elevator This material is the foundation reinforcement scheme of external elevator, which contains complete and detailed contents, and can be downloaded by designers for reference. -
Construction scheme of construction elevator foundation Construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme -
Construction design scheme of an elevator installation 1. For foundation treatment, according to the elevation of the elevator attached embedded parts on the tower column, determine the concrete bottom height of the elevator foundation, fill and compact the backfill soil of the base, and ensure that the bearing capacity of the foundation is not less than 150KPa. 2. The elevator foundation shall be positioned on site according to the attached figure. 3. The elevator foundation is a concrete slab with a height of 400mm and a size of 4000mm × 34 -
Installation scheme of construction elevator in residential building Installation plan name: residential building construction elevator installation plan This residential building construction elevator installation plan is rich in content, pictures and text, and is a good technical data for reference -
Foundation design scheme of construction elevator Project name: Shanglinyuan Public Building (Primary School Teaching Building) Project location: No. 9, Shishan Third Ring East Road Project content: the total construction area of the project is 4129m2, the building base area is 1204 m2, the number of floors is 4 above the ground, and the building height is 16.4 meters. The structural form of the project is reinforced concrete frame structure, and the structural safety level is Level II. The project -
Installation scheme of an external elevator in Yanghe This document is a complete installation plan for external elevators, which is worth reference and can be downloaded by designers -
Detailed construction scheme for elevator installation The elevator is a square standard section, manufactured by Shanghai Baoda Construction Machinery Co., Ltd., model: SCD200/200J. -
Reinforcement scheme of construction elevator roof Building 1 #, Zhengzheng Hongyuyuan, Longhu, Xinzheng City, is a frame shear wall structure. There is one floor underground with a floor height of 3.8m, which is used as a parking and equipment room. When designing the outdoor roof of the basement, the roof reinforcement is 10@170 Double layer and two-way, plate thickness is 180; The elevator foundation design is 12@200 Double layer and two-way. -
Detailed elevator installation construction scheme In this project, there are two elevators without machine room in the VIP lobby, with a load capacity of 1000Kg, three floors/three stations, and a design standard speed of 1.0m/s. The elevator power supply is directly supplied by A # transformer room in two ways, and the end of the two-way emergency power supply automatically switches to each other. -
Formwork for construction scheme of vertical elevator (2) Before taking up the post, the safety technology training of the company's professional personnel shall be carried out, and the training records shall be kept, signed by the trainer and the trainee, and filed by the company. -
Elevator shaft scaffold erection scheme The total construction area is 11877 square meters. The main building is a frame core tube, 29 floors above the ground, and the building height of the roof floor is 84.1m. Overview of the elevator shaft shelf project The elevator shaft of the main building of the project starts at -6.500m from the baseplate of the basement. The height of scaffold in elevator shaft is 90m. The net size of elevator shaft section is 21 -
Elevator construction organization design scheme Elevator construction organization design scheme Elevator construction organization design scheme Elevator construction organization design scheme -
Construction organization scheme of elevator shaft platform Construction organization scheme of elevator shaft platform Construction organization scheme of elevator shaft platform Construction organization scheme of elevator shaft platform -
Elevator installation construction scheme (example) Project Name XXXXXXXX Garden Project Location: No. 108, XXXX Road, Bao'an District, Shenzhen Elevator User: Shenzhen XXXXX Co., Ltd. Builder: Shenzhen XXXXX Construction Engineering Co., Ltd. Supervisor: Shenzhen XXXXX Supervision Co., Ltd. Contract No.: DT2008030015 Elevator -
An organization in Suzhou designed the elevator shaft scheme The elevator shaft shall be provided with inclined supports between the two sides of each parking floor and the furnace frame to ensure its lateral stability. The steel structure weight of the elevator shaft of a single furnace frame is about 120 tons. -
Construction scheme for installation of construction elevator This document is the construction scheme for the installation of construction elevators. The contents are detailed for reference. -
Elevator engineering organization design scheme The elevator test run is carried out in three steps in strict accordance with the specifications. The first step is the no-load test run of the elevator, the second step is the static load test, and the third step is the dynamic load test run. Each elevator can be handed over for acceptance only after the three-step test meets the requirements. The static load test is actually an overload test. When the elevator is at the bottom floor and does not move, load the car step by step to 150%~200% of the rated load of the elevator -
Elevator construction design scheme of a community Construction scheme Scaffold shall be erected before the bottom pit garbage is cleared. If the pit is not concreted, 50mm thick wood plate can be used to level under the column. The steel pipe of the shelf should have an outer diameter of 48 mm and a wall thickness of 3~3.5 mm. The combined fastener should be a qualified product manufactured by a unit approved by the labor department. The load-bearing parts must be made of malleable steel fasteners. For shelf laying -
Organization design scheme of an elevator project The common method is the winch pulley block, whose force bearing point is the embedded anchor point at the top. Before lifting, take trial lifting measures. The weight of the trial lifting object is 1.25 times the weight of the tractor. The tractor can be formally lifted after the overload trial lifting is no problem -
Construction organization design scheme of an elevator Therefore, before erecting the scaffold, the construction personnel installing the elevator should draw the construction drawing of erecting the scaffold according to the hoistway size, machine room and guide rail layout size, indicate the size, and then erect according to the drawing. -
Special plan for elevator foundation of people and goods construction The total land area of the project is 6992 ㎡, and the total construction area is 20184.45 ㎡, of which the ground construction area is about 12880.25 ㎡, and the basement construction area is 7304.20 ㎡. ± 0.000 of the project is equivalent to the absolute elevation (Yellow Sea elevation) of 2.9m, and the relative elevation of the natural ground on the construction site is 2.500m, so the relative elevation of the natural ground -
Construction Scheme for Pedestrian and Freight Elevator Foundation This document is the construction scheme for the foundation of passenger and freight elevators. The content is detailed for reference. -
Installation scheme of construction elevator on the floor Chongqing Hongding International Garden Project is located in Guanyinqiao Business Center, Jiangbei District, Chongqing. The project is a "four long project". The basement and podium are "modern plazas" which have been officially accepted and put into use in 1999. Hongding International Garden Project will continue to build Block A, Block B and Block C high-rise residential buildings from the seven storey podium building, with a total construction area of 160000 square meters, of which: Block A 4 -
Special construction scheme for passenger and freight elevator The total construction area of the project is about 122915m2, consisting of 3 #, 5 #~13 # buildings and underground garage (garage area is 16042.45m2: divided into civil air defense area of 8732.7m2 and non civil air defense area of 7309.86). Except 8 # building (brick concrete structure) and 13 # building (frame structure), they are all shear wall structures, including 3 # and 5 # buildings -
A company's elevator shaft scheme document Each landing floor of the elevator shaft is connected to the furnace frame through the connecting corridor, and the central control building through the connecting corridor of 13.700m floor.
![[Luoyang] Construction Scheme for New Elevators of Commercial Residential Building 10](http://g.co188.com/img/topics/new_topics/images/blank.gif)
-
one Newly added elevator construction unit -
two New road construction scheme -
three New pipeline construction scheme -
four Formwork staircase construction scheme -
five New construction scheme -
six Plan of adding elevator to slab floor -
seven Construction scheme of new elevator shaft -
eight New concrete construction scheme