Elevator construction scheme basis

[Guangdong] Construction Scheme of Elevator for Residential Building

Building B of Huangpu Jingang Huayuan Community is located in the east of Lixiang Road and the south of Liyuan Community in Huangpu District. The project is mainly composed of two units. The building area is about 21702 ㎡, and the total height of the building is 61.8m. According to the actual situation of the site, the project decided to install a SC200/200TD construction lift, which can meet the requirements of all main brick masonry and external wall decoration

[Fujian] Elevator construction scheme for office building project

The construction elevator of this project is located on the roof of the basement. The lower part of the basement roof where the foundation of the construction elevator is located needs to be reinforced with scaffolding. The specification of the construction elevator is SCD150/150, the lifting height of the construction elevator is 43.35m, and the installation height of the construction elevator is 48m.

[Guangdong] Construction Scheme for Passenger and Freight Elevator of Residential Engineering (85m)

The total construction area of the project is 74193.98M2, consisting of one floor underground and 25 floors above the ground. Among them, the first floor of No. 2 basement, and buildings 7, 8, 21 and 22 are high-rise buildings. The installation height of passenger and freight elevators is 85 meters.

[Luoyang] Construction Scheme for New Elevators of Commercial Residential Building 10

The elevator shaft of this project is a reinforced concrete shear wall with a total height of 106.7 meters and a thickness of 300 mm. Due to design changes, two elevators are added to the east of Building 10 # (see the figure below). When the design change occurs, the main body has been constructed to the 13th floor, and the tower crane of Building 10 # coincides with the elevator shaft. According to the requirements of the construction unit at that time, when the main building is completed, the tower crane

Construction Scheme for Outdoor Construction Elevator of Building 1~3 # in Phase V of Nanchang Evergrande Oasis

This document is the construction scheme I and project overview of the outdoor construction elevator for buildings 1~3 # of Nanchang Evergrande Oasis Phase V Project, which is located at the intersection of Yingbin Middle Avenue and Yingbin South Avenue in Nanchang, and is the fifth phase development project of Evergrande Real Estate Group in this building (Nanchang Evergrande Oasis). Nanchang Evergrande Oasis Phase V 1~3 # buildings have a basement, frame

[Hebei] Construction scheme of elevator for commercial plaza (with rich drawings)

Basic performance of construction elevator and material elevator: SCD200/200 construction elevator is driven by gear rack. The transmission part is on the top of the cage. It is used as a lifting equipment for vertical transportation of building construction. The rated load is 2 × 2000kg. The main structure consists of the cage, transmission part, guide rail frame and outer cage. When suddenly falling and its speed exceeds the normal operating speed

[Beijing] Construction Scheme for Outdoor Elevator of Comprehensive Office Building (Calculation Sheet)

The total building area is 60692 ㎡, with three floors underground, 20 floors of the above ground hotel building, 11 floors of the office building and 4 floors of the podium. The eaves height of the hotel is 78.75m, that of the office is 49.35m, and that of the podium is 20.55m. To ensure the construction progress, our project department plans to install the east construction elevator in the first ten days of April 2008.

[Henan] Construction Scheme for External Elevator of Commercial Plaza (SC200/200)

The commercial area uses 4 construction elevators for Tower A, Tower B and Tower C of Building 12 and Building 13 respectively. The external elevator model is SC200/200. The rated load of each cage of the external elevator is 2 tons, and the elevator is about 5.2 meters higher than the roof. Each construction elevator in Tower A and Tower B of Building 12 is attached to 10 walls, Tower C of Building 12 is attached to 4 walls, and the construction elevator in Building 13 is attached to 8 walls.

Special scheme for construction elevator (multiple)

A number of special schemes for construction elevators and derrick are of great help to friends engaged in construction and supervision.

Construction organization scheme for elevator installation

The total height of the cable-stayed bridge is 66m, and the whole cast-in-place structure above the ground has an earthquake fortification intensity of 8 degrees. In order to meet the needs of on-site construction personnel, the project decided to install a SCD200/200 elevator at the site, with a total height of 69 meters. The foundation of the tower crane elevator is a concrete slab foundation.

Final version of construction elevator scheme_secret

The operation center project of Shenzhen Stock Exchange is located in Lot 32-1-1, Futian Central District, Shenzhen, with Pengcheng 2nd Road to the east, Shennan Avenue to the south, Mintian Road to the west and Fuzhong 3rd Road to the north. The project has a total construction area of 267341.07 ㎡ and a total height of 245.8 m, which is a super high-rise office building. The main structure of the project is steel reinforced concrete frame

Construction organization scheme for elevator installation

The total height of the cable-stayed bridge is 66m, and the whole cast-in-place structure above the ground has an earthquake fortification intensity of 8 degrees. In order to meet the needs of on-site construction personnel, the project decided to install a SCD200/200 elevator at the site, with a total height of 69 meters. The foundation of the tower crane elevator is a concrete slab foundation

Installation scheme of construction elevator in a city

It is convenient for daylighting, with clear vision, and is equipped with an outside span cab. One side of the cage close to the building is equipped with an upper and lower double door or a flap door, and the other side is equipped with a single door to facilitate personnel access.

Roof reinforcement scheme of a construction elevator

In this project, two SC200 construction elevators are planned to be arranged on axes 14 and 23. The lift center line is 3200mm away from the outside of the wall; In order to prevent the construction elevator from passing through the basement roof and affecting the structural use function and waterproof effect of the basement roof when it is installed on the basement roof, our project will install the construction elevator on the basement roof, and the structure of the equipment is the frame

Site supervision scheme for construction elevator

This data is the construction elevator supervision site plan, in word format, 6 pages in total. Contents: 1. Project overview 2. Target control 3. Basis for safety supervision 4. Safety management procedures 5. Construction elevator supervision process 6. Safety supervision during construction 7. Responsibilities of on-site supervisors

Foundation reinforcement scheme of construction elevator

This document is the foundation reinforcement scheme of construction elevator, including: project overview: the project is located at the intersection of Jianshe Canal Road and Xinhu Canal Road, Jiang'an District, Wuhan City. The building area of buildings A and B of the project is 33102.96m2, including 649.16 m2 of commercial area and 32453.80 m2 of office area of each building; The underground area of the project is about 20000m2.

Reinforcement scheme of construction elevator roof

Reinforcement scheme for top slab of construction elevator Building 1 #, Zhengzheng Hongyuyuan, Longhu, Xinzheng City, this project is a frame shear wall structure. There is one floor underground with a floor height of 3.8m, which is used as a parking and equipment room. When designing the outdoor roof of the basement, the roof reinforcement is 10@170 Double layer and two-way, plate thickness is 180; The elevator foundation design is 12@200 Double layer and two-way.

Installation scheme of construction elevator for a financial plaza

Preparation basis. Project overview. Construction preparation. Foundation design of construction lift. Installation of construction lift. Specific requirements for installation and removal. Safety assurance measures. Construction elevator installation organization structure. Attached drawings. Technical disclosure of safety operation procedures for passenger and cargo elevators. Personnel and freight elevator operation post responsibility system. Calculation sheet of foundation bearing capacity of construction elevator.

Construction scheme of construction elevator foundation

Construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme construction elevator foundation construction scheme

Installation scheme of construction elevator in residential building

Installation plan name: residential building construction elevator installation plan This residential building construction elevator installation plan is rich in content, pictures and text, and is a good technical data for reference

Detailed elevator installation construction scheme

In this project, there are two elevators without machine room in the VIP lobby, with a load capacity of 1000Kg, three floors/three stations, and a design standard speed of 1.0m/s. The elevator power supply is directly supplied by A # transformer room in two ways, and the end of the two-way emergency power supply automatically switches to each other.

Elevator construction design scheme of a community

Construction scheme Scaffold shall be erected before the bottom pit garbage is cleared. If the pit is not concreted, 50mm thick wood plate can be used to level under the column. The steel pipe of the shelf should have an outer diameter of 48 mm and a wall thickness of 3~3.5 mm. The combined fastener should be a qualified product manufactured by a unit approved by the labor department. The load-bearing parts must be made of malleable steel fasteners. For shelf laying

Construction design scheme of an elevator installation

1. For foundation treatment, according to the elevation of the elevator attached embedded parts on the tower column, determine the concrete bottom height of the elevator foundation, fill and compact the backfill soil of the base, and ensure that the bearing capacity of the foundation is not less than 150KPa. 2. The elevator foundation shall be positioned on site according to the attached figure. 3. The elevator foundation is a concrete slab with a height of 400mm and a size of 4000mm × 34

Foundation design scheme of construction elevator

Project name: Shanglinyuan Public Building (Primary School Teaching Building) Project location: No. 9, Shishan Third Ring East Road Project content: the total construction area of the project is 4129m2, the building base area is 1204 m2, the number of floors is 4 above the ground, and the building height is 16.4 meters. The structural form of the project is reinforced concrete frame structure, and the structural safety level is Level II. The project

Construction organization design scheme of an elevator

Therefore, before erecting the scaffold, the construction personnel installing the elevator should draw the construction drawing of erecting the scaffold according to the hoistway size, machine room and guide rail layout size, indicate the size, and then erect according to the drawing.

Formwork for construction scheme of vertical elevator

(2) Before taking up their posts, they shall receive safety technical training from the company's professionals, and have training records, which shall be signed by the trainers and trainees and filed by the company.

Elevator installation construction scheme (example)

Project Name XXXXXXXX Garden Project Location: No. 108, XXXX Road, Bao'an District, Shenzhen Elevator User: Shenzhen XXXXX Co., Ltd. Builder: Shenzhen XXXXX Construction Engineering Co., Ltd. Supervisor: Shenzhen XXXXX Supervision Co., Ltd. Contract No.: DT2008030015 Elevator

Construction scheme for installation of construction elevator

This document is the construction scheme for the installation of construction elevators. The contents are detailed for reference.

Installation scheme of construction elevator on the floor

Chongqing Hongding International Garden Project is located in Guanyinqiao Business Center, Jiangbei District, Chongqing. It is a "four long project". The basement and podium are "modern plazas", which have been officially accepted and put into use in 1999. Hongding International Garden Project will continue to build Block A, Block B and Block C high-rise residential buildings from the seven storey podium building, with a total construction area of 160000 square meters, of which: Block A 4

Special construction scheme for passenger and freight elevator

The total construction area of the project is about 122915m2, consisting of 3 #, 5 #~13 # buildings and underground garage (garage area is 16042.45m2: divided into civil air defense area of 8732.7m2 and non civil air defense area of 7309.86). Except 8 # building (brick concrete structure) and 13 # building (frame structure), they are all shear wall structures, including 3 # and 5 # buildings

Detailed construction scheme for elevator installation

The elevator is a square standard section, manufactured by Shanghai Baoda Construction Machinery Co., Ltd., model: SCD200/200J.

Reinforcement scheme of construction elevator roof

Building 1 #, Zhengzheng Hongyuyuan, Longhu, Xinzheng City, is a frame shear wall structure. There is one floor underground with a floor height of 3.8m, which is used as a parking and equipment room. When designing the outdoor roof of the basement, the roof reinforcement is 10@170 Double layer and two-way, plate thickness is 180; The elevator foundation design is 12@200 Double layer and two-way.

Special plan for elevator foundation of people and goods construction

The total land area of the project is 6992 ㎡, and the total construction area is 20184.45 ㎡, of which the ground construction area is about 12880.25 ㎡, and the basement construction area is 7304.20 ㎡. ± 0.000 of the project is equivalent to the absolute elevation (Yellow Sea elevation) of 2.9m, and the relative elevation of the natural ground on the construction site is 2.500m, so the relative elevation of the natural ground

Construction organization scheme of elevator shaft platform

Construction organization scheme of elevator shaft platform Construction organization scheme of elevator shaft platform Construction organization scheme of elevator shaft platform

Construction scheme of elevator for people and goods construction

The elevator construction scheme for people and goods construction is detailed and rich, which can be downloaded by netizens..

Construction Scheme for Pedestrian and Freight Elevator Foundation

This document is the construction scheme for the foundation of passenger and freight elevators. The contents are detailed for reference.

Elevator construction organization design scheme

Elevator construction organization design scheme Elevator construction organization design scheme Elevator construction organization design scheme

Roof reinforcement scheme of construction elevator garage

The construction area of this project should be 47908.78 square meters, of which the construction area of 2 # residential building is 28559.65 square meters (18559.65 square meters above the ground and 10000 square meters below the ground); The building area of 3 # residential building is 19349.61 square meters (10702.99 square meters above the ground

SSD80 Construction Elevator Installation Scheme.doc

Construction Scheme for Installation and Dismantling of Passenger and Freight Elevator

The total building area of this block is 205000 square meters, including 7 high-rise residential buildings and 1 underground garage. The residential buildings are L1 #, L2 #, L3 #, L4 #, L5 #, L6 # and L7 # respectively. The residential building is a shear wall structure, with 28 floors above the ground and 3 floors below the ground. The floor height is 2.9m, and the maximum height of the building is 86m. CFG pile composite foundation treatment and foundation structure