Construction steps of municipal road works

Construction contract of municipal road works

This document is the construction contract of municipal road works. The contents are as follows: in accordance with the Contract Law of the People's Republic of China, the Construction Law of the People's Republic of China and other relevant laws and administrative regulations, following the principles of equality, voluntariness, fairness and good faith, both parties have reached an agreement on the construction of this contract section and concluded this contract. 1、 Project overview II. Scope of project contracting

Construction Organization Design of Municipal Road Engineering 1

Road A of the first bid section of Xingxian Jiayuan Phase II Municipal Road Project is the north side road of one of the municipal roads supporting the Xingxian Jiayuan Phase II Project. It is located in Xingwei Village, Qixia District. Road A (1), 35 meters wide, is a regional main road, located at the north end of the community, starting from Jingwu Road in the west and ending at the east end of the community, with a total length of 720.95 meters. The planned red line is 35m wide, at the intersection with Jingwu Road

Construction organization design of municipal road engineering

General road engineering construction and main construction contents include: subgrade, pavement, pipe network, lighting, etc.

Budget for construction drawings of municipal road works

[Introduction] Project construction drawing budget? PPT format? Page 70 [Contents] Unit price of divisional and subdivisional works, total price of measures, total cost of measures, fees of other items, taxes, tax included costs, municipal road works, construction drawing budget 1, comprehensive bill of quantities 2, calculation specifications for quantities of soil and stone works 3, soil and stone works

Construction scheme of municipal road works

This project is an old road reconstruction project. The planned red line of the road is 45m, and the section layout is 45m (red line width) - 7m (sidewalk) - 31m (roadway) - 7m (sidewalk). The cross slope of the pavement is 1.5%, and the works mainly include road works, rainwater works, lighting works, communication pipeline works, power pipeline works, etc.

Summary of construction of municipal road works in universities

This document is a summary of the construction of the municipal road project of the university. The roads in the university city adopt a ring radiation road network, forming a trunk road network structure dominated by "three rings and six radiation", supplemented by more than thirty radiation roads to form an organic whole of the road network of the entire island, forming a road grid bureau that is both self integrated and fully connected with the outside. The content is detailed and worth downloading.

Construction survey scheme of municipal road works

This plan is a targeted construction plan for the construction site. Please correct it and exchange and learn from each other for reference only.

Municipal Road Engineering Construction Summary.doc

Municipal Road Municipal Road Engineering Construction Summary.doc Municipal Road Engineering Construction Summary.doc Project Construction Summary.doc

Construction scheme of a municipal road project

The construction scheme of a municipal road, the middle section of Qingquan Road (Sanlian Road to Heping Road 0+500~1+020) of Shenzhen Longhua Urban Construction Investment Development Co., Ltd., is located in Longhua Town, Bao'an District, Shenzhen, with the starting stake number of 0+500~1+020, and the total length of this bid section is 520 meters

Thesis on construction organization design of municipal road engineering

Section II Compilation basis: The compilation basis for the construction organization design of sporadic projects such as residential quarters, pedestrian bridges and ground parking lots mainly includes the following information and documents.

Construction organization design of a municipal road project

It is an urban road project. In addition to conventional construction, it also includes dynamic compaction construction, lighting, pipe network, etc.

Internship Report of Municipal Road Engineering Constructors

This document is an internship report for municipal road construction workers, including company profile, main internship contents, work internship experience and summary, for reference.

Construction contract of a municipal road project

The construction contract of municipal road works is detailed and accurate in design for designers' reference.

Technical disclosure of municipal road engineering construction

Gangwu 1st Road has a total length of 2624.72m. The project department will build K1+360-K2+624.72 section, 1264.72m long. The red line in the normal section is 40m wide.

Safety assurance measures for municipal road construction

(1) The project manager leads the members of the safety leading group to carry out safety inspection in a planned, purposeful and focused manner. (2) The Project Management Department shall organize inspection at least once a month, and the team shall conduct inspection every day. (3) Comprehensive inspection shall be carried out before construction and operation in rainy season and winter, and night shift sampling inspection shall be organized if necessary. (4) The Engineering Section shall inspect all parts of the construction site

Compilation of municipal road engineering construction safety system

1. The company's decision-making level determines the quality, safety, civilized construction and other objectives of the construction project according to the contract objectives signed with the construction unit. (First level objectives) 2. The project manager shall determine the project progress, cost control, quality, safety, civilized construction, control objectives and measures according to the first level objectives determined by the company. (Secondary objective) 3. Deputy project managers and project managers of the Project Management Department

Construction design scheme of municipal road engineering

2.1.1 According to the design drawings and actual site conditions, this section is proposed to be divided into the main road operation area and ramp operation area. The main road operation area focuses on the bridge across the north small river; Ramp operation area focuses on 2 # overpass, and carries out parallel operation. 2.1.2 Construction period arrangement: the commencement date and completion date specified in the bidding addendum are November 15, 2000 and 200 respectively

Detailed Rules for Construction Safety Supervision of Municipal Road Engineering

Working system: (1) Regular learning and communication: the Director shall organize all supervisors to study design documents, relevant regulations, specifications, standards, safety supervision contracts, safety supervision outlines, etc., and timely convey the Owner's documents and meeting spirit. Through learning and communication, the professional level of supervisors can be improved. (2) Fill in daily safety supervision diary: a

Construction scheme of a municipal road project

1. Road part structure (1) motorway structure 3cm fine asphalt concrete surface course 4cm medium asphalt concrete surface course 5cm coarse asphalt concrete surface course asphalt seal course 20cm (5.5:12.5:82) lime fly ash stone base course 35cm 12% lime soil base course+compacted roadbed treatment (2) non motorway structure 3cm fine asphalt concrete

Construction organization scheme of a municipal road project

There are a large number of ditches, ponds and various types of hidden creeks that need to be replaced in the project site. According to the analysis of the current road engineering examples, the quality of ditch and creek filling is a common problem in the road engineering construction. The quality of ditch and creek filling is not up to standard, and the road often has large area of collapse, uneven settlement, a large number of cracks and cracks.

Construction Organization Design of Municipal Road Engineering 1.doc

Municipal Road Engineering Construction Organization Design.doc

Special construction scheme for municipal road works

Before construction, the surface shall be cleaned up. For the filling road section, the miscellaneous fill of 30cm of the foundation surface soil must be removed in place at one time. After removal, the construction site shall be free of weeds, roots, tree roots and other humus or organic matter, and the site shall be kept clean. Construction waste and humus must be removed to the loess layer. For the abandoned drainage channel or waterlogging pond, the sludge at the bottom of the channel or pond shall be completely removed

Construction organization design data of municipal road engineering

The cross section of the road is 4.5m (sidewalk)+5.5m (roadway)+5.5m (roadway)+4.5m (sidewalk), and the full width of the road is 20m. The structural layer of the roadway is: 22cm cement concrete surface layer+15cm thick 6% cement stabilized crushed stone+15cm thick graded crushed stone. Sidewalk: 6cm thick (20 * 10 * 6) C30 color

2017 Municipal Road Engineering Construction Summary.doc

2017 Municipal Road Engineering Construction Summary.doc2017 Municipal Road Engineering Construction Summary.doc2017 Municipal Road Engineering Construction Summary.doc

Construction Organization Design of Municipal Road Engineering.pdf

Municipal road engineering environmental protection construction document

The expressway from xx Avenue to xx Avenue starts at the location of xx Road interchange and ends at xx interchange, with a total length of about 6032m. The geographical location of the expressway project from xx Avenue to xx Avenue is as follows: the project line intersects xx Road, xx Line, xx Railway, xx East Road, xx Avenue, etc. from south to north. Xx~xx fast track intersects with xx line at xx Mountain

Summary of municipal road construction of Guangzhou University

Guangzhou University Town is located in Xiaoguwei Island and the south bank of Panyu District, Guangzhou, with Luoxi Island to the west, Guangzhou Biological Island to the north and Changzhou Island to the east. The total planned land is 43.3 square kilometers. It is divided into five university clusters, and more than ten new campuses of universities will be located in the university city. The roads in the university city adopt the road network of circular radiation, forming a trunk road network node dominated by "three rings and six radiation"

Construction organization design of large-scale ecological municipal road project

The total length of the project is 1060 meters, and the road width is 16 meters. The bridge is a lower layer arc plate arch bridge, 168.1 meters long and 16.5 meters wide. Construction technology for internal retaining wall, soft foundation treatment, lower arc slab arch bridge, simply supported beam bridge, drainage works, box culvert, subgrade and pavement and ancillary works

Construction organization design of a municipal road project

The road of Longshan Road Pumping Station Supporting Project is basically north-south, starting from the gate of the original * * City Street Lamp Management Office and ending at the head of Huawu Bridge, with a total length of 166.100 meters. The current road is basically asphalt concrete pavement, with a small number of houses and buildings distributed on both sides of the road. The road intersects with Huawu Road and Guanyi Road.

Construction Organization Design of Chongqing Municipal Road Engineering

Conventional road works, mainly including roads (subgrade, pavement), pipe network, greening, etc.

Construction organization design of a municipal road project in Shanghai

The construction organization design of a municipal road project in Shanghai includes the starting and ending chainages of the project K0+000~K1+1177.43, the total length of the road is 1177.43m, the road grade is urban trunk road, the red line width of the road is 60m, and the median strip of 22m in the middle is the BRT special line of the bus rapid transit system. Road cross section layout: 5m pedestrian

Construction scheme of two-way 6-lane municipal road project

The subgrade between the roadbed bottom and the surface clearing and compaction elevation shall be filled with plain soil or 5% lime soil, and the designed resilient modulus of the subgrade top soil foundation shall be ≥ 35MPa

Construction design of municipal road engineering in a region

1.3.1 of Technical Specification for Construction of Highway Bridges and Culverts JTJ041-89 1.1.4 Regulations on Civilized Construction Management of a city provides corrugated beam anti-collision guardrails on both sides of the central separation strip for field test. The line passes through Beixiaohe and Wangjinggou, which are respectively equipped with Beixiaohe River Crossing Bridge and Wangjinggou 1 # and 2 # bridges. The main road terminal K7+850 connects with Jingshun Road. Design adoption

Construction technical disclosure of a municipal road project

At the construction joint, it is allowed to continue pouring until the compressive strength of poured concrete reaches more than 1.2Mpa. Before pouring, the concrete surface of the construction joint shall be roughened, loose stones shall be removed, and the concrete shall be washed with water. Before continuing to pour concrete, a layer of cement slurry shall be poured first, and then the concrete shall be poured normally, and carefully vibrated and compacted to ensure good bonding

Special construction documents for auxiliary roads of municipal road works

1. The setting requirements are to build a construction auxiliary road to meet the requirements of two-way vehicle traffic in K-1+906.790~K5+085.486 section of XX road according to the provisions of 2.5.6 of the addendum to the bidding document for bid I of XX road, so as to facilitate the transportation of construction materials and the mobilization and demobilization of large mechanical equipment. This project is a temporary project. According to the actual situation of site land use, building distribution, etc

Detailed Rules for Construction Supervision of Municipal Road Engineering

a. All construction management personnel and engineering technicians must be familiar with relevant construction safety regulations before taking up their posts. b. The functional departments at all levels and the main principals of the construction unit must implement the national and enterprise labor protection regulations and safety technical regulations. c. All independent operators must have the operation certificate of their own type of work and position, and special operators shall have the special certificate issued by the labor department

Bidding Document for Construction of a Municipal Road Project in Fujian

Bidding document for construction of a municipal road project in Fujian, prepared in May 2007, in WORD format, 61 pages in total

Bidding process of a municipal road project in Guangdong

Bidding process of a municipal road project in Guangdong

Bidding Document for Construction of a Municipal Road Project in Zhuhai

The bidding document for the construction of a municipal road project in Zhuhai, in WORD format, is 33 pages in total. It is prepared according to the demonstration text of Zhuhai construction project construction bidding documents, which consists of three parts: special terms, general terms and annexes.