-
Roof waterproof construction record of a project This document is a record of roof waterproofing construction of a project. The contents are complete and can be downloaded -
Special construction scheme for roof works Special construction scheme of roof works, project overview of construction parts, construction preparation, construction arrangement, main construction methods and processes, quality standards, finished product protection, cost saving measures -
Roof construction scheme of a project in Shandong The structural form of the project is frame structure, with two floors underground and four floors above the ground. The seismic grade is Grade III. The basement foundation is strip foundation, and the concrete strength grade is C30. -
Detailed Rules for Construction Supervision of Roof Engineering When the inverted roof protective layer is paved with pebbles, the pebbles shall be evenly distributed, and the quality (weight) of pebbles shall meet the design requirements. Test method: observe and check and calculate the quality (weight) according to the bulk density. -
Inspection record of roof waterproof construction of a project This document is the inspection record of roof waterproof construction of a project. The contents are complete and can be downloaded -
Construction scheme for disclosure of roof works Roof project disclosure construction scheme Roof project disclosure construction scheme Roof project disclosure construction scheme -
Technical disclosure roof construction) 1. Organize various raw materials to enter the site and do a good job in site retest. 2. The quality, technical performance, mortar mix ratio and fine aggregate concrete mix ratio of cement, sand, non-woven fabric, sealant, waterproof roll, waterproof coating and other materials used must meet the design requirements and construction specifications. 3. Tools: material handling trolley, shovel, wood trowel, iron trowel, scraping bar, guiding rule, oil bucket -
Construction process standard of roof works (1) The quality and technical performance of the materials used must meet the design requirements and construction quality acceptance specifications. -
Construction scheme of multi-storey roof works Construction scheme, project overview, construction preparation, construction deployment, main construction methods, finished product protection and environmental protection measures, quality assurance measures, and safe and civilized construction measures of multi-layer roof project -
Construction scheme of a residential roof project The project includes buildings 1-6 and 8. The roof works are mainly divided into accessible roof and non accessible roof. All accessible roofs are paved with floor tiles, and all inaccessible roofs are cement mortar roofs. No. 1-6 and 8 buildings jump from the top of the first floor to the accessible roof; The second floor roof and elevator roof of buildings 1-6 and 8 are inaccessible. -
Construction technology of roof engineering detail structure This chapter is applicable to waterproof structures such as coiled material waterproof roof, film coated waterproof roof, rigid waterproof roof, tile roof, and insulated roof gutter, eaves gutter, cornice, flashing, water outlet, lattice joint deformation joint, exhaust pipe, and pipe protruding from the roof. The waterproof node shall consider the changes of roof due to materials, structure, temperature difference, drying shrinkage, vibration and other factors according to the characteristics of building structure and environmental conditions -
Construction organization of a double roof greenhouse project The project is a double roof multi span greenhouse project designed by the Architectural Design Institute of Guangdong Agricultural University. As a modern seasonal vegetable and flower plantation, the project adopts fully enclosed glass greenhouses and non civil engineering control systems, including 18 glass greenhouses, each covering an area of one mu, including outdoor cultivation, with a total construction area of 14685 square meters; Management room (2 buildings, 16 rooms) 285 -
[Shaanxi] Roof Engineering Construction Scheme Project overview 3.1 Roof engineering design overview The roof design waterproof grade of the project is Grade II, with two layers of fortification, and two layers of 3-thick - 20 ℃ SBS polyester tire modified asphalt waterproof coiled material. The design strictly follows the policy of "combination of prevention and drainage, multiple layers of fortification, and overall sealing"; The thermal insulation layer adopts 135mm expansion pipe perlite plate; 150 × 15 for accessible roof -
Construction scheme of a villa roof project 2、 Project overview This project is located in a development zone. It is the first phase project of a limited company, covering a total area of 189 mu. There are 16 townhouses in Section II, including 11A1+4A1 '+9A3+1A4+1B4+1B4'+7C2+1D1a+2D1b+2D1b+3D3 '+2D3'a+1D4' -
Roof frame construction scheme of a project in Chongqing The project (Block AB project of *****************************) is located in * * #, North * * Road, Jiangbei District. The structural form is a frame shear wall core tube structure, with a building height of 107.70m, a building area of 39583m2, a basement floor, 32 floors above the ground, and a standard floor height of 3m. The short limb wall, beam formwork and framework formwork of roof framework shall be made of stereotyped wood formwork -
Roof construction scheme of a residential project in Qingdao The main materials for roof works are perlite powder, 60 thick extruded insulation board, 3 thick SBS, glazed anti-skid tiles, and P.O.32.5 cement. Waterproof and thermal insulation materials shall have product qualification certificates and performance test reports. The name, specification and performance of materials shall comply with the current national product standards and design requirements. After the materials enter the site, they shall be sampled and re inspected according to the regulations, and can only be used after the re inspection is qualified -
Construction scheme for roof works of a hotel (1) Before the construction of waterproof layer, the cement mortar leveling layer shall be made. This design is 20 thick 1:2.5 cement mortar leveling. The following points shall be paid attention to during construction: 1) Before operation, the base course shall be watered and wetted, and the pure cement slurry shall be swept once, and the mortar shall be laid while brushing, so that it can be firmly bonded with the base course without loosening, hollowing, pits, sanding, ash falling, etc. 2) Leveling layer table -
Roof works (roof composition and drainage construction) PDF This document is a PDF of roof works (roof composition and drainage construction), including: Section I Basic Knowledge I, roof function II, roof composition III, roof classification IV, pitched roof (slope representation) Section II Calculation of quantities Section III Wall and ground waterproofing -
Construction design of a double roof greenhouse project There are 18 indoor greenhouses, each covering an area of one mu, including open field cultivation, with a total construction area of 14685 square meters; The management room (2 buildings and 16 rooms) is 285 square meters, which is of ordinary brick masonry structure, and the boiler room is 48 square meters, which is of single storey brick concrete structure; The pump room is 42 square meters, and the computer room is 52 square meters, all of which are ordinary bungalow brick and tile structures. Each building is based on the specialty and actual situation -
Construction scheme for steel structure roof of a project This project is the steel structure project of Yanqi County * * * Reconstruction Project of Yanqi County Government. It is a full steel structure roof, with a total length of 150 meters, a width of 21 meters, a cornice height of 4.2 meters, and a building area of 3150 square meters. -
Construction Scheme of a Commercial Building Roof Project This document is the construction scheme document of a commercial building roof project. The document includes: the roof project area of commercial relocation building A is about 3000m2, all of which are accessible roofs, and the waterproof layer material is modified asphalt waterproof coiled material. -
Construction scheme of a roof glass project This project is a lighting art corridor, with a steel column steel roof truss stress system. The round arched roof is 6+0.76+6mm thick coated laminated glass, with a span of 15000mm and a length of 52000mm. This construction scheme is based on the contract documents, current national technical standards, construction and acceptance specifications, project quality assessment standards and operating procedures, etc -
[Shandong] Roof Construction Scheme of Exhibition Hall Project The roof waterproofing works of the main pavilion project of Jinan * * Flower Expo * * * are divided into planting soil, accessible roof and non accessible roof. The non accessible roof adopts organized drainage with a drainage slope of 1%. The roof waterproof adopts the drawing design to change the method of Roof-2, the surface method is added with glass fiber mesh cloth to prevent cracking, and the surface layer is added with 40mm thick ф 6.5@150 Reinforcement mesh C -
Roof construction scheme of a project in Beijing This document is the roof construction scheme document of a project in Beijing. The documents include: the roof of the machine room, tower and staircase out of the roof of this project is inaccessible, and the rest are accessible roofs. The roof waterproof grade is Grade II, and the service life is 15 years. -
Construction scheme of roof waterproof coiled material for a project High strength and low elongation waterproof coiled materials are selected for this project. Combined with the actual situation of the project, 3mm thick type II tensile force ≥ 400N and elongation ≥ 5% jute carcass SBS modified asphalt waterproof coiled materials are selected. -
Detailed roof construction scheme The total building area of the project is 10014 m2, with 2 floors underground (including mezzanine) and 4 floors above the ground. The structural form is frame structure. The first floor is 5.100m high, and the second, third and fourth floors are 3.450m high. Eaves are 20.550m high. -
Detailed Rules for Construction Supervision of Roof Engineering The construction of insulation layer of plate material shall meet the following requirements: 1 The base layer of insulation layer of plate material shall be flat, dry and clean. 2 The plate-like thermal insulation material shall be close to the surface of the base course to be insulated, and shall be paved and cushioned steadily. 3 The joints of upper and lower layers of plates laid in layers shall be staggered; The gaps between plates shall be filled with similar materials. 4 The pasted plate-like thermal insulation materials shall be tightly pasted -
Technical disclosure of waterproof construction of roof works The minimum height of the end of the waterproof layer at the flashing part of the waterproof layer from the roof leveling layer shall not be less than 200mm. After the large-area coiled material is paved, the flashing and end shall be treated uniformly, and the end shall be sealed. -
Technical disclosure of roof construction The shape, size and specification of reinforcement processing must meet the design requirements. The surface of reinforcement shall be clean without damage, oil stain, rust, etc., and shall be cleaned before use. Granular or flaky rusty reinforcement shall not be used. -
Technical disclosure of roof engineering safety construction The binding of reinforcement shall meet the requirement that the intersection of reinforcement shall be firmly bound with iron wire, and the load-bearing reinforcement must not be displaced. The distance between the end of the overlapping length of the rebar binding joint and the rebar bend shall not be less than 10 times of the rebar diameter, and the joint shall not be located at the maximum bending moment of the member. The rebar lap joint shall be firmly tied with iron wire at the center and both ends. The binding joints of stressed rebar shall be staggered -
Word for roof construction scheme of a project in Shandong The preparation basis of this construction scheme mainly includes: architectural drawings, structural drawings, relevant specifications, procedures, standards, atlases, etc. See Table - 1 for details. -
Construction Scheme of Roof Engineering in a City The project includes buildings 1-6 and 8. The roof works are mainly divided into accessible roof and non accessible roof. All accessible roofs are paved with floor tiles, and all inaccessible roofs are cement mortar roofs. Topic: Roof construction scheme -
Key construction scheme of roof works in rainy season The current roof engineering design is mostly structural layer - slag slope making layer - insulation layer - cement mortar leveling layer - waterproof layer - waterproof protective surface layer. However, the drying problem of the slag slope making layer, insulation layer, leveling layer and other bases in the roof construction in rainy season has become a hindrance to the construction progress. -
Construction scheme of roof works in a certain place Two supporting public buildings, two semi underground garages and two underground civil air defense projects. The total construction area is 119228.71 square meters, including 91645.19 square meters above the ground and 27583.52 square meters underground. The maximum height of the building is 39.15m, and the height of the standard floor is 3.25m. The staff dormitory is reinforced concrete shear wall; match Topic: Roof construction scheme -
Safety construction scheme of steel structure roof According to the drawings provided by Party A, the requirements for safety technical disclosure of electric welder operation, gas welder operation, lifting worker operation and high-altitude operation, in order to ensure the safe and high-quality smooth completion of the project, the construction scheme of the construction team is hereby reported. -
Construction organization design of a light steel roof project This document is 51 - the construction organization design of a light steel roof project. It contains complete and detailed contents, which can be used as a reference for designers. -
SBS roof waterproof construction scheme of a project 2、 Project overview and material use 1. The roof waterproof of this project adopts "Shuyang" brand 3mm thick polyester tire SBS modified asphalt waterproof coiled material. The material has high tensile strength, large elongation, good flexibility, heat resistance, fatigue resistance, low temperature resistance, aging resistance, tear resistance, high impact resistance, and can meet the requirements of various building waterproof functions. 2. Waterproof construction quality requirements, up to -
Construction scheme of tile hanging slope roof of a project This document is the construction plan of a project with tile sloped roof, which is detailed and can be downloaded for reference. -
Technical disclosure of roof construction safety If there is frost and snow on the roof, it should be cleaned in time and reliable anti-skid measures should be taken. -
Safety technical disclosure of coiled material roof construction project The roof shall be paved with coiled materials, and a 1.2m high fence shall be set around the roof. If the height of the surrounding protection of the inclined roof increases depending on the slope, the surrounding edge near the roof shall be operated sideways.
