-
Construction scheme of epoxy glass fiber reinforced plastic lining According to the construction scheme of epoxy glass fiber reinforced plastic lining, the pressure of compressed air shall be adjusted between 0.4-0.8mpa according to the corrosion degree of the cleaned surface and the cleaning requirements of the cleaned parts. Select the spray angle according to the structure of the workpiece to be cleaned. It is generally controlled at 30 ° - 60 °. At least 30 °. For solid rust and oxide skin, a nearly vertical spray angle can be used -
Construction scheme for anti-corrosion of epoxy glass fiber reinforced plastic lining of sewage treatment tank Construction scheme for anti-corrosion of sewage treatment tank lined with epoxy glass fiber reinforced plastic Construction scheme for anti-corrosion of sewage treatment tank lined with epoxy glass fiber reinforced plastic -
FRP anti-corrosion construction scheme for sewage tank Three cloth five paint FRP anti-corrosion construction scheme commonly used in industrial buildings -
Construction Scheme of Epoxy FRP for Comprehensive Water Tank The storage solution of the carbon phase III comprehensive circulating water calcination cold and hot water tank, the green anode cold and hot water tank, and the degreasing sedimentation tank is acidic, and the concrete floor and wall are easy to be corroded. In order to avoid the corrosion damage of the tank and make it durable, the glass fiber reinforced plastic (three cloth and four oil, one bottom and one surface) anti-corrosion treatment is carried out for them. The pool is a rectangular airtight container. The circulating water calcination cold and hot pool: 30m long and 12 wide -
About the FRP anti-corrosion construction contract Payment of project funds: the project funds shall be paid at the end of the construction period (settled according to the actual area). If the unqualified products are reworked to be qualified, the materials and labor materials used shall be compensated by Party B, and Party B shall not have disputes. -
Special construction scheme for xx FRP stool 1.1 Project name: xxx 1.2 Construction site -
Glass scale anti-corrosion construction scheme for flue gas desulfurization project This operation instruction is applicable to the glass scale anti-corrosion construction (absorption tower, flue, channel and other scale linings) of the second phase unit flue gas desulfurization project of the thermal power plant. -
Special construction scheme for large glass installation Special construction scheme for large glass installation, project overview, general construction deployment, platform 2 steel pipe rack checking, safety and civilized construction measures -
Construction scheme of wall paint glass According to the site construction conditions, it is divided into 3 construction sections in total, and the construction sequence is the C-axis auxiliary room of the elevated waiting hall; E-axis auxiliary room of elevated waiting hall; G-axis auxiliary room of elevated waiting hall. -
Glass installation construction scheme of a project Glass installation construction scheme of a project Glass installation construction scheme of a project Glass installation construction scheme of a project -
Construction scheme for anti-corrosion and thermal insulation of power plant 1.1 Project name: Flue Gas Desulfurization Project of Huaneng Dongfang Power Plant 2 × 350MW Expansion Project, insulation and anti-corrosion of absorption tower equipment, flue and oxidation air pipes, supports, hangers and equipment of desulfurization island. 1.2 Project location: Huaneng Dongfang Power Plant Phase II 3 # and 4 # flue, absorption tower, oxidation fan room and surrounding areas. -
Anti corrosion construction scheme of storage tank in a city The derusting grade is sand blasting Sa21/2, that is, sand blasting for derusting the steel surface. The grease and dirt on the metal surface are completely removed, and there is no loose oxide skin, rust, paint coating and other attachments. The residual traces are only spot or strip light color spots, exposing the gray white uniform rough metal surface -
Pool anti-corrosion construction scheme document Water tank anti-corrosion is the most important part of the anti-corrosion project of the project. -
Model of anti-corrosion construction scheme for pool Model of anti-corrosion construction scheme for water tank Model of anti-corrosion construction scheme for water tank -
Anticorrosion construction scheme of a pipeline and equipment The asphalt for cold primer oil in this project is No. 30 A construction petroleum asphalt. Before boiling, cut the asphalt into small pieces of less than 1.5kg, put them into a clean asphalt pan, gradually raise the temperature and mix them, and keep the temperature within 180~200 ℃ (the maximum temperature shall not exceed 220 ℃). Generally, it should be boiled at this temperature for 1.5~2.5 hours until -
Construction scheme of steel structure anti-corrosion The construction organization design serves as the basis for guiding the construction. During the preparation, many factors such as the target construction period, project quality, project management organization, labor organization, construction schedule control, mechanical equipment and material allocation, construction methods of major divisional and subdivisional works, safety assurance measures, civilized construction and environmental protection measures, cost reduction measures, etc. shall be fully considered, Highlight science -
Construction scheme of cast-in-place rainwater square ditch According to the construction scheme of cast-in-place rainwater square ditch, according to the buried depth of the square ditch, the current ground elevation and the groove slope gradient (generally set at 1:0.5), the edge line of the slot opening is sprinkled with lime on the ground, and the backhoe excavator is used for excavation. Mechanical trenching shall ensure that the soil at the bottom of the trench is not disturbed, and 200mm soil layer shall be reserved at the base for manual bottom cleaning. If tombs, dry wells and unknown structures are encountered during slotting -
Silane impregnated concrete anti-corrosion construction scheme Concrete anti-corrosion construction scheme for Phase I Project of 1 # Wharf of Zhuhai Deepwater Marine Engineering Equipment Manufacturing Base Project of Oil Engineering, material SICONG-SP205 silane -
Construction scheme of foam glass external wall insulation In this project, foam glass external thermal insulation system is made after plastering of concrete beam columns, parapets and masonry walls of the external wall. The specific method is as follows: base wall interface agent treatment → 18-20 thick R (D) P15 (1:3 cement mortar) plastering mortar leveling → matching adhesive bonding 35 thick foam glass → second batch scraping matching special mortar and pressing alkali resistant glass cloth → -
Construction scheme of glass curtain wall of a project Project overview 1. The project covers an area of about 53.8 hectares, with a total construction area of about 68000 square meters. There are 20 main single buildings, of which 17 are cast-in-situ reinforced concrete pitched roof structures, 3 are cast-in-situ reinforced concrete flat roof structures, and 1 is a steel structure roof of bolt ball grid structure. The building shape of pitched roof is a slope rising from all sides -
Construction scheme of epoxy colored sand for a clean workshop This construction scheme is applicable to clean rooms and dust-free workshops with high requirements for ground construction, including material preparation, construction technology, finished product protection, etc. -
Construction scheme of building glass curtain wall Our company plans to concentrate its advantages, transfer a group of professionals with rich construction management experience, young and strong sense of responsibility to form the "* * (Phase III) Home World Glass Curtain Wall Project Department" (on-site office), directly manage the construction site on behalf of our company, and organize the deepening design and construction of the project as a whole. At the same time, our company will -
Construction plan of glass curtain wall The frame keel and various required connectors, decorative strips, bolts, rubber strips, sealing materials, etc. must be checked with the design drawings -
Construction scheme of glass wool external wall insulation The insulation construction period of this project is 20 days, and the construction period is tight. The insulation construction should be reasonably organized to ensure the insulation construction period. For the thermal insulation construction of Dingfuzhuang Middle School, the external wall of the teaching building is first insulated, then the external wall of the experimental building is insulated, and finally the external wall of the canteen is insulated. The scaffolding outside the teaching building has been completely erected. The four facades of the teaching building are constructed from bottom to top at the same time -
Equipment pipeline anti-corrosion and thermal insulation construction scheme Establish the project department of equipment pipeline anti-corrosion and insulation works to implement in accordance with the national project management specifications, earnestly perform the responsibilities of the project manager department required by the national project management specifications, select elite and strong generals, select a reasonable installation construction team, and provide reliable assurance in resources, technology, management, etc. Safety, quality, progress, training, commissioning, investment -
Construction scheme design of anti-corrosion and thermal insulation 3.2.1 Adhere to the principle of advanced technology, scientific management, economy and practicality on the basis of meeting the requirements in accordance with the anti-corrosion and insulation project scheme and technical specifications 3.2.2 of the bidding documents. 3.2.3 According to the actual situation of the project, around the key points of the project, make careful deployment and reasonably arrange the construction sequence. 3.2.4 Implement project management. Adopt network plan -
Anticorrosion construction scheme of a power plant Baode Shendong Power Generation Co., Ltd. 1 # and 2 # units, with an installed capacity of 2 × 135MW, were installed in 2005 and put into operation in 2006. Both boilers are produced by Wuhan Boiler Factory. The boiler model is WGF480/13.7-1 and the boiler type is 480T/H circulating fluidized bed boiler. -
Construction Scheme for Anticorrosion and Thermal Insulation of an Equipment Pipeline 1.4.1 Implement the project manager responsibility system, and the project manager is responsible for the overall management of the whole project implementation process. 1.4.2 The project technical director is responsible for the overall technical work and external technical liaison during the project implementation. 1.4.3 The Engineering Technology Department and the Quality Inspection Department shall strictly control the project quality to further ensure that -
23 - Construction Scheme of a Glass Curtain Wall 23 - The construction scheme of a glass curtain wall, with detailed description, is available for reference and download. -
Construction Scheme for Anticorrosive Paint of Steel Structure The paint materials have high quality requirements and the construction process is strict. Rust removal and painting have strict requirements on the relative humidity of the air, because it is directly related to the surface finish of the paint and the adhesion of the paint. The paint color matching requires high precision. -
Construction scheme of anti-corrosion paint for a steel structure The floating rust, loose black skin and foreign matters on the steel structure surface shall be removed with shovel, sand, scraper, sandpaper and electric tools. The grease and paint marks on the steel structure surface shall be removed by solvent cleaning first. If there are still layers of rust on the surface, they shall be removed by power tools, steel brushes or other tools. The welding spatter, weld bead, etc. near the welding seam must be cleaned with electric tools or steel brushes -
Construction Scheme for Anticorrosion and Thermal Insulation of a Pipeline in Liaoning The water and external protective layer is aluminum alloy corrugated iron 0.8mm; The heat exchanger insulation material is microporous silicate, and the protective layer is galvanized iron sheet 0.5mm. -
Special construction scheme for glass curtain wall This process is applicable to the fabrication, installation, construction and acceptance of civil building glass curtain wall (hereinafter referred to as glass curtain wall) projects with a building height of no more than 150m for non seismic design or 6-8 degree seismic design. -
Construction scheme of glass curtain wall in a certain place This document is the construction scheme of glass curtain wall in a certain area. The content is detailed and can be used for reference. -
Lightning protection construction scheme for glass curtain wall The lightning protection device (system) and grounding of glass curtain wall is an important part of ensuring that the building glass curtain wall is not struck by lightning. The floor where the curtain wall is installed passes through the? 10 The galvanized round steel is connected in series with the embedded parts of this layer and connected with the lightning protection downlead of the main building to form a uniform ring. All curtain walls themselves are used as main keels as downleaders, and steel braided wires are used to cross lines at the insertion parts between floors to form the whole curtain wall -
Construction scheme of a roof glass project This project is a lighting art corridor, with a steel column steel roof truss stress system. The round arched roof is 6+0.76+6mm thick coated laminated glass, with a span of 15000mm and a length of 52000mm. This construction scheme is based on the contract documents, current national technical standards, construction and acceptance specifications, project quality assessment standards and operating procedures, etc -
Anticorrosion and waterproof construction scheme of foundation works The surface of the foundation and the shear wall below the outdoor floor elevation shall be coated with two coats of asphalt cold primer and asphalt mastic with a thickness of ≥ 300 μ m The waterproof level of the pool and elevator foundation pit is two layers of waterproof and two layers of fortification. In addition to the self waterproof of reinforced concrete, two layers of 3mm thick SBS modified asphalt waterproof coiled materials are used. The structural baseplate and side wall of the pool and elevator pit are made of self waterproof concrete -
Construction scheme of a scientific research glass curtain wall Curtain wall construction scheme, this project is a single curtain wall decoration project, with the total content of glass curtain wall construction drawings, and the work amount of 700 square meters. The contents include: project summary, construction preparation, construction arrangement, schedule and technical measures. -
Construction scheme for epoxy floor of clean workshop Construction process of solvent-free epoxy self leveling floor 1) Basic requirements for base course treatment: the surface base course before self leveling cement should be flat, dry, solid (free of looseness), clean (free of dust and oil), etc. If there is looseness, it should be completely removed, and the base course should be thoroughly cleaned. First, the flatness, hardness, strength Humidity and ambient humidity
-
one Epoxy resin anti-corrosion construction -
two Technical disclosure of trench construction -
three Sample trench construction contract -
four FRP anti-corrosion construction scheme -
five Code for construction of FRP anti-corrosion -
six FRP Anticorrosion Construction Contract -
seven Specification for FRP anti-corrosion atlas -
eight Construction scheme of FRP chimney