Pool construction scheme template

Reinforced concrete pool construction scheme template page 51

This document is the template for the construction scheme of the reinforced concrete pool, with 51 pages in total. Content introduction: This project is located in Shandong Xinhecheng Industrial Park, Haihua Industrial Park, Weifang Binhai Economic Development Zone, Shandong Province. This special plan is the XX pool construction plan. The building area is XX ㎡, the length is XX m, the width is XX m, and the height is XX m (from the bottom plate to the top of the pool). ± 0.0 of the project

Special construction scheme for formwork of fire pool pump room in a central primary school

The special construction scheme for the formwork of the fire pool pump room of a central primary school, with detailed description, is available for reference and download.

Special construction scheme for a formwork

The total construction area is about 44370 square meters

Analysis on formwork construction scheme

This project is located in the east of the south section of Qishan Road, Luohe City. One floor underground and eight floors above the ground. The basement is a equipment room, the first floor is a shop, the second floor is a lounge, and the third to eighth floors are office rooms; The structure form of basement building is frame shear wall structure, and the main structure form above ground is frame structure; Building base area is 794m2

Construction Scheme 1 of Assembled Large Formwork

Formwork construction scheme 220140905155701

The formwork construction scheme 220140905155701 is rich and detailed, and can be downloaded for reference and study by netizens.

Formwork construction scheme 20140905155718

The template construction scheme 20140905155718 is rich and detailed, and can be downloaded for reference and study by netizens.

Large formwork construction scheme of a project

Large formwork construction scheme of a project Large formwork construction scheme of a project Large formwork construction scheme of a project

Formwork construction scheme 20140905155716

This data is the formwork construction scheme 20140905155716, which is detailed and can be used for reference.

Formwork construction scheme 20140905155720

This document is the template construction scheme 20140905155720, which is detailed and can be used for reference.

Construction organization scheme of formwork

The total construction area of the project is 28008.23 square meters, consisting of 9 buildings and an underground garage. The safety level of the building structure of the project is Level II, and the design level of the foundation is Level II. The seismic fortification intensity is 7 degrees (0.1g), and the design earthquake group is the first group.

Construction Scheme for Large Formwork of Powerhouse Project

The plant project of Guangzhou Qiming Software Technology Co., Ltd. is a five storey reinforced concrete frame structure, with a "concave" architectural plan. The total length of the plant is 94m, the width is 66m, and the total construction area is 22240m2. The height of the first floor is 5m, from two to five 4m. The second floor of Line 7-9 × H-K axis is used as the space above the first floor lobby, and the floor height is 9.0m.

Construction scheme of formwork support system

Construction Scheme I of Formwork Support System for Area I of Phase I of Haikou Jinyu Plaza Project Overview The Area I of Phase I of Jinyu Plaza Project is located in Yusha Road, Haikou City, which is the original Yusha Village. It is a government demolition and resettlement housing project. The project is a comprehensive building integrating shopping malls and residences. The first floor of the basement is a parking lot and equipment room. The podium building on the first to third floors is a shopping mall, and the podium building on the fourth to twenty third floors is a shopping mall

Formwork construction scheme for residential works

Construction method and scheme of template

Formwork for winter construction scheme of buildings

Building winter construction scheme Formwork building winter construction scheme Formwork building winter construction scheme Formwork building winter construction scheme Formwork building winter construction scheme Formwork building winter construction scheme Formwork building winter construction scheme Formwork

Formwork construction scheme of the Mansion

Formwork construction scheme of the mansion of the nobility Formwork construction scheme of the mansion of the nobility Formwork construction scheme of the mansion of the nobility Formwork construction scheme of the mansion of the nobility Formwork construction scheme of the mansion of the nobility

Special construction scheme for formwork works

It is very important to plan necessary revolving materials and reasonable construction scheme, equip high-quality woodworking team and control revolving materials in the construction of formwork engineering. In order to ensure the construction quality and safety, the following wooden formwork construction scheme is specially formulated in combination with the actual situation of the project.

Special construction scheme for formwork safety

The formwork design of plate wood support shall be carried out according to the requirements of fair faced concrete. On the premise that the formwork meets the requirements of strength, rigidity and stability, the surface finish shall be improved as far as possible, and the internal and external corner formwork shall be unified and neat.

Formwork construction scheme of a shopping mall

This project is located in xx Bridge Town, xx New District, xxx District, which is the bid section of xx Tongjing International City, and consists of multi-storey residential D36 and commercial building D-S4. The first floor of D36 is a commercial building, the first to seventh floors are residential buildings, and D-S4 is a second floor commercial building. There is a store link between D36 and D-S4. The installation materials of column, wall, beam and slab formwork in this project are wood plywood, wood

[Nanjing] Frame formwork construction scheme

The project is located in the east of Buyue Road and north of Dangui Road, Pukou Economic Development Zone, Nanjing. Building 1 # and 2 # are five floors of frame. The cornice height is 23.40m, and the structural form is frame structure. The foundation adopts pile foundation and pile cap foundation beam foundation. The foundation is an independent foundation under the column, and the foundation of the inner and outer walls is a strip foundation.

Formwork construction scheme of a commercial and residential building

The construction area of the project is about 25000 square meters. The commercial and residential building is composed of two building numbers. It is a 13 story cast-in-place reinforced concrete frame shear structure. The structural design is based on 8 degrees of seismic fortification. The total height of the building is about 45m, the floor height is 3m, and the maximum span is 6m.

Analysis on the formwork of curtain wall construction scheme

This title is an analysis of the curtain wall construction scheme template, and the contents are only for reference.

Template of special construction scheme for formwork

2) Set out the axis and elevation control line of each beam according to the main control line. 3) Beam formwork support. The beam formwork is supported by fastener type full steel pipe scaffold, and the vertical and horizontal spacing of the upright is 1.0m; Vertical and horizontal two-way bottom sweeps shall be set for the vertical poles, and the bottom sweeps shall be 200mm away from the floor; Vertical and horizontal two-way horizontal rods shall be set within the full height range of the vertical rod, and the step distance of the horizontal rod (upper and lower horizontal rods

Special construction scheme for tall formwork

The formwork erection scheme for the transfer floor height of a well-known building in Beihai, Guangxi, including the calculation sheet, has been proved by experts. Including relevant charts

Model of bridge formwork construction scheme

The formwork of this project adopts composite wood formwork with a thickness of 12mm. The formwork batten adopts pine wood, and the support system adopts fastener type steel pipe support and wood support.

Formwork construction scheme for foreign style house

This scheme is applicable to large flow construction. Most of them are of less modeling layout style, and there are too many single type sample floors. Light steel is used for fixed length processing. The wall adopts light steel keel and back ridge reinforcement system; Top plate adopts wheel buckle support system

[Guangdong] High formwork construction scheme

Basic information of the project: the total construction area is 33000 ㎡; Number of buildings/floors: 1 building/6 floors; The building height is 25m, the height of 1-5 floors is 4.3m, and the height of 6 floors is 3.5m; Structural form: cast-in-place reinforced concrete frame; Pipe pile foundation is adopted. As shown in the figure, the custom X area and Y area need to set up tall formwork respectively during the construction of the three-layer structure. X area is characterized by supporting

Construction scheme of a beam formwork support

The two floors of 6 # and 7 # buildings are 15 meters apart. The main building is 11 floors, with a total height of 34.70 meters. The basement is one floor and the two floors are connected. Two post pouring belts are set at the interval of 15 meters in the middle to separate them. The main building is a reinforced concrete frame shear wall structure, and the floor is a cast-in-place integral beam slab structure. The design requires connecting the two floors at the 9th and 10th floors

Special construction scheme 2 for high-risk formwork

Special construction scheme for high-risk formwork Special construction scheme for high-risk formwork Special construction scheme for high-risk formwork

Special construction scheme 3 for high support formwork

Special construction scheme for high supported formwork Special construction scheme for high supported formwork Special construction scheme for high supported formwork

Construction scheme for special formwork removal

Nanba Hydropower Station is located on the main stream of the Fujiang River in Nanba Town, Pingwu County, Sichuan Province. It is the eighth stage of the "nine stage" cascade development power stations in the Pingwu reach of the upper reaches of the Fujiang River. The power station is river bed type development. The normal pool level is 685.85m, the normal tailwater level is 673.20m, the design head is 12.0m, the design power generation flow is 216m3/s, and the installed capacity of the power station is 2

Formwork construction scheme organization design

1. The structural design of formwork and its support shall strive to ensure that the structure is safe and reliable, and the cost is economical and reasonable. 2. It can fully meet the expected safety and durability under the specified conditions and within the specified service life. 3. When selecting materials, try to make them common, reusable and convenient for maintenance and repair.

Modification of special construction scheme for formwork

This document is a template special construction scheme modification Employer: Hubei Guohai Real Estate Development Co., Ltd. Designer: Wuhan Zhuoer Architectural Design Co., Ltd. Supervisor: Hubei Huatai Engineering Construction Supervision Co., Ltd. Contractor: Zhejiang Garden Construction Group Co., Ltd. Construction site: Wangjiawan, Shizishan Street, Hongshan District, Wuhan

Formwork Special [Construction Scheme] Phase II

The second phase of the template project [Construction Scheme] is detailed and rich, which can be downloaded by netizens.

1 - Latest special construction scheme for formwork

1 - The special construction scheme of formwork is up to date, with rich and detailed contents, which can be downloaded by netizens.

Xxx pump room_forml_construction scheme

Xxx pump room_template_construction scheme is detailed and rich, which can be downloaded by netizens for reference.

Special construction scheme for superelevation formwork

This document is a special construction plan for ultra-high formwork, which is detailed and can be used for reference. I hope it can help you.

Itemized construction scheme of formwork works

This project is the sixth phase of the expansion project of * * Mechanical Transmission (Tianjin) Co., Ltd. The Project is located in the * * Industrial Plant Park, No. 18A, * * Middle Road, * * Economic and Technological Development Zone, Tianjin. The total building area is 24087.76m2, and the building height is 10.750m. The structural form of the plant is single-layer steel frame structure, which belongs to single-layer industrial plant. This worker

Formwork construction scheme of a hospital in Liaoning

3.3 Site preparation As the construction site of the project is very narrow, the temporary wood processing plant is located in the south, and processing turnover is carried out in stages. 3.4 Construction position and construction period requirements Main structure: 2009.10.25-2010.6.15 (see the general construction schedule for details) 3.5 Division of construction flow section Comprehensive consideration of uneven settlement and on-site construction

Formwork construction scheme of exhibition hall project

This project is a key project of Jinan in 2009. The construction site is south of * * City * * Avenue, * * District, Jinan City. The project covers an area of 17071.4 ㎡, with a total construction area of 43466 ㎡, including 14660 ㎡ exhibition hall area, 10800 ㎡ conference center area, two floors (five floors in some parts), 23.95 meters in total height, and foundation form