Construction scheme of steel structure roof concrete

Construction scheme of steel structure roof concrete

Project name: Taibai Health Resort Hotel Construction site: Taibai Road, Taibai County, Shaanxi Province Total construction area: 38581.98 ㎡, including 2400 ㎡ of lobby steel structure house. The steel structure roof of the lobby is 120mm thick. There are two flat roofs with a height of 4.5m. There are 3 inclined roof surfaces with a slope of 2

Courseware of steel structure roof concrete construction scheme

Total building area: 38581.98 ㎡, including 2400 ㎡ of lobby steel structure house. The steel structure roof of the lobby is 120mm thick. There are two flat roofs with a height of 4.5m. There are 3 inclined roof surfaces with a slope of 22 ° and a height of 10.98m, 10.98m and 16.69 respectively

Construction scheme of a steel structure roof

(1) Technical preparation? Check whether the design documents are complete and reasonable and conform to the national standards? Detailed design of components shall be carried out according to the design documents to facilitate processing, fabrication and installation. And prepare the material purchase plan? Determine the processing technology of steel structure. (2) Purchase and storage of materials? The main materials and accessories of the steel structure of the project are all made of Q235 steel

Safety construction scheme for steel structure roof

4、 The construction personnel must comply with the technical requirements put forward by the drawings and technicians, strictly implement the principle of not being out of shape, carry out the construction while checking according to the technical standards, eliminate the unqualified products at the beginning of construction, and must meet all the technical standards required by the products, otherwise we will take full responsibility. 5、 Do a good job of civilized construction, and clear the site after construction. And do a good job in fire fighting,

Construction scheme for steel structure roof of a project

This project is the steel structure project of Yanqi County * * * Reconstruction Project of Yanqi County Government. It is a full steel structure roof, with a total length of 150 meters, a width of 21 meters, a cornice height of 4.2 meters, and a building area of 3150 square meters.

Construction scheme of steel structure tpo roof

It is mainly used for the welding and fixation of the waterproof layer of the gutter. Through inductive welding, the gasket with polymer coating is hot-melt welded with TPO coiled material (see the attached detail node processing: field welding drawing). Its construction technology and fastening method have passed the American FM certification.

Siphon rainwater roof construction scheme Concrete structure 2

The roof of the project is concrete roof concrete gutter, and its roof rainwater adopts advanced siphon pressure drainage system. The rainstorm recurrence period of the project is calculated as 5 years in Nanjing. The total catchment area of the roof is about 11142 ㎡, and the total rainfall volume is about Q=478.0L/s. There are six systems on the roof, and a total of stainless steel rainwater hopper RC is used

Construction scheme for steel structure roof of a factory building in Guangdong

1. The project is located in the roof project of * * * * Industrial Zone, Qingyuan City, Guangdong Province, which belongs to the roof steel structure project of * * * * (Qingyuan) Leather Manufacturing Co., Ltd. (factory building), with a design projection area of 93 × 39=3627 ㎡, and the ridge is drained into the concrete gutter in two slopes.

Steel structure roof construction scheme (siphon drainage)

Before pipeline construction, it is necessary to be familiar with the technical requirements of design construction drawings, relevant technical data and construction acceptance specifications. Prepare the construction budget, project schedule and construction scheme, prepare the plan of material supply, equipment allocation and labor demand, and ensure the smooth commencement of the project. 1.2.2 Pipe prefabrication shall be carried out according to the design construction drawing, and it must be carried out according to the design coordinates and elevation position

Construction Scheme for Steel Structure Roof of a Workshop in Kunshan

The steel structure part of the project is the roof part, including the production and installation of purlins, steel beams, roof color steel plates, etc. Our company, as the contractor, aims to create the project construction products that the construction unit is satisfied with with the lowest economic cost, the best construction quality, and the fastest construction speed. The steel plate used in the steel structure of the project is Q235-B steel produced by Jinan Iron and Steel Group Co., Ltd. The welding rods are

Construction scheme for steel structure roof of a toll station

The grid structure of the project is an upright square pyramid bolt sphere node grid structure, with a building area of 940 square meters. The support form is the lower chord multi-point support. The plane size of the grid structure is 64 meters in diameter. The specification of grid members is from Φ 60 × 3.5 - Φ 159 × 10.0, the specification of bolt sphere is from Φ 100 - Φ 260, and the specification of high-strength bolts is M20-M56. Grid member

Construction scheme of steel structure roof construction platform

The Shanghai World Expo Performance Center covers an area of nearly 80000 square meters, including 45000 square meters of aboveground buildings and 20000 square meters of underground buildings. The upper shell metal roof system mainly consists of: inner metal curtain: 0.9mm thick vertical lock edge sector roof panel (aluminum magnesium alloy plate) from outside to inside; 100mm thick thermal insulation rock wool (with single-layer aluminum foil); Damp proof course (PV

Safety construction scheme for steel structure roof

1、 Firmly abide by the laws and regulations of safe and civilized construction, and implement in accordance with the requirements of the technical disclosure of operation safety. Employees on duty must have qualified work certificates, understand the operating procedures, and strictly follow them. 2、 Before construction, set up protective tie rods, ropes and supports for safe construction, check whether the objects are safe and reliable, whether the equipment is intact, and whether the conditions for safe construction are correct

Construction scheme for steel structure of roof equipment foundation

. 1 Project overview This project is the "Jinjiang Hotel Watering Tower Foundation Steel Structure Platform Reconstruction Project", located at No. 59, Maoming South Road, with a construction area of about 348 square meters. The project requires the reconstruction of foundation steel structure platform and supporting works of civil decoration. 1.2 Description of project characteristics 1.2.1 Coverage of this steel structure project 1. Steel structure foundation plan

Special construction scheme for steel structure roof.doc

Special construction scheme for steel structure roof.pdf

Curtain wall and steel structure construction scheme

Curtain wall and steel structure construction scheme

Roof foaming concrete construction scheme

This paper mainly introduces the properties, construction technology and acceptance standards of foamed concrete. Price comparison of foamed concrete is attached. This project is the expansion project of the staff canteen of Shaanxi Radio and Television Center. The project is located in Shaanxi Radio and Television Station, with a building area of 3750 square meters. The roof slope making layer and thermal insulation layer are foam concrete, with a thickness of 12~19.5 cm. It is poured in two times, and the bottom is insulated

Steel structure construction scheme of a hotel

This project is the fabrication and installation of the atrium steel structure and light roof on the seventh floor of Jinqiao Hotel, with a span of about 7m. The roof is a Kablon grating structure, and the steel used for the steel structure is Q235 steel; The end plate flange connection of the beam, the main frame beam column connection and other steel frame components are connected on site with 10.9 friction type high-strength bolts, and the component contact surface is mechanically derusted with the derusting grade of

Construction scheme of steel structure of a factory building

This project is the 106 and 107 workshops of the motorcycle manufacturing complex. The construction content of the steel structure project includes the steel platform between 106 # workshops (① axis~③ axis+12000) and the intersection (axis~axis). The top elevation of the steel platform is 4.8m, and the top plate is 6mm thick checkered steel plate, ①~⑦ axis, and the corridor rigid frame structure of ⑩~axis and~axis; 107 powerhouse (① axis~② axis) intersection（

Construction scheme of concrete structural materials

Understand the variety, expression method and code of reinforcement, be familiar with the main mechanical performance indicators of reinforcement and concrete, master the selection principles of reinforcement and concrete in structural design, and understand the concept of bond between reinforcement and concrete.

Steel structure construction scheme of a power plant

****The steel structure sub divisional works of bid section B1 of the power plant 2 × 600MW unit project mainly include the following contents: steam turbine room steel beams, building pressure bearing steel plates, steel roof trusses; Steel columns, steel beams, floor bearing steel plates and steel funnels between side coal bunkers; Steel column and beam of boiler elevator shaft; Steel column, steel beam and floor bearing steel plate of fan room; Steel flue support, etc. Structural form and

Construction scheme of a steel structure grid

The construction organization design is prepared according to the following national specifications, industrial standards, relevant documents and drawings

Construction scheme for hoisting of a steel structure

The main structure is concrete frame structure; The total length of the plant is 36 meters, the span is 5 spans and 30 meters, and the column spacing is 6 meters. The main components are steel beams, steel crane beams, C-purlins, wall color plates, etc. On the premise of ensuring the construction period, our company is faced with adverse construction factors such as large daily lifting quantities, so safe and civilized construction is particularly important

Construction scheme of steel structure of an airport

Construction scheme of an airport steel structure Construction scheme of an airport steel structure Construction scheme of an airport steel structure

Construction scheme of a steel structure exhibition hall

Construction scheme of a steel structure exhibition hall Construction scheme of a steel structure exhibition hall Construction scheme of a steel structure exhibition hall

Roof formwork shifting concrete construction scheme

This data is: "Roof formwork shifting concrete construction scheme", which is detailed and can be used for reference.

Construction scheme for installation of a steel structure

A steel structure installation construction scheme A steel structure installation construction scheme A steel structure installation construction scheme

Concrete structure construction scheme of a construction site

This document is a concrete structure construction plan for a construction site, which is detailed and can be used for reference.

Concrete structure reinforcement construction scheme

This project is a new xxxx building project, with two floors underground and 31 floors (27 floors of the office building) of the above ground scientific research incubation building, and a frame shear wall structure. As the commercial concrete standard curing test block for 28 days failed to meet the design requirements, the entity was tested by a qualified testing agency entrusted, and some columns and shear walls with C60 concrete and C50 concrete poured on the second floor of the basement and the ground were still

Special construction scheme of a steel structure

This project is mainly the superstructure project of the expanded product warehouse project. The superstructure includes two parts: steel structure and masonry enclosure structure. 2.1 Steel structure: 1 # warehouse steel structure project, with a total building area of 7734m2, a floor area of 7734m2, and a building height of 12.45m. 2 # warehouse steel structure project, with a total building area of 5476m2,

Construction scheme of dam concrete structure

SUMSUM Dam is an RCC gravity dam, with a height of 82m, a length of 229m, a maximum width of 65.8m at the dam bottom, and an impervious layer of 1m at the bottom, upstream and downstream of the dam. The dam body is divided into two spillway sections with surface outlets. The upstream is equipped with two stoplog gates and two radial service gates, each of which is 16m wide. The left bank non retaining dam section and the right bank retaining dam section are on the top

Construction scheme of steel structure works

This project is the steel structure project of the transit greenhouses (I) and (II) of the 100000 ton/year differential polyester staple fiber optimization and adjustment project. The building covers an area of 1905 square meters, with a building area of 953 square meters. The main body is a one story steel frame structure, and the total height of the cornice is 6.12 meters. The frame steel column is welded H-shaped column, and the ceiling is profiled steel plate 0.5mm 800.

Design of steel structure construction scheme

4.3.2 When installing high-strength bolts, the friction surfaces of components and connecting plates shall be kept dry and clean, and shall not be operated in rainy and snowy days or when the relative air humidity is greater than 95%. 4.3.3 When the high-strength bolt is connected to the installation, the protruding side of the nut shall contact the chamfered side of the washer. The chamfered side of the second washer of the large hexagon head bolt shall face the bolt head. four

Construction scheme of main concrete structure

Project name: 400000 tons/year differential fiber project Construction unit: Liaoning Longqiwan Chemical Fiber Co., Ltd. Supervision unit: Liaoning Zifa Construction Supervision Acceptance Consulting Co., Ltd. Design unit: China Textile Industry Design Institute Construction site: Liaoning Longqiwan New Area

Concrete construction scheme of main structure

According to the design requirements of the project, the concrete mix design should not only meet the strength requirements, but also consider the requirements of concrete stiffness and crack control, which should meet the design and calculation requirements.

Construction scheme of steel structure anti-corrosion

The construction organization design serves as the basis for guiding the construction. During the preparation, many factors such as the target construction period, project quality, project management organization, labor organization, construction schedule control, mechanical equipment and material allocation, construction methods of major divisional and subdivisional works, safety assurance measures, civilized construction and environmental protection measures, cost reduction measures, etc. shall be fully considered, Highlight science

Roof construction scheme of steel structure workshop

This data is the construction plan for the roof of the steel structure workshop, which is 9 pages in total.

Construction Scheme for Steel Structure Roof of an Airport Terminal

The civil engineering of the terminal main building is a three storey concrete frame floor (elevation+13.6m, width 183.85m, length 414m), which has been completed; The corridor between the main building and the corridor has also been completed (elevation+19.5m).

Special construction scheme for light steel structure roof

This project is the steel structure project of the new production workshop of Hunan * * * Co., Ltd. The axis distance is 8228.59m2, surrounded by four brick walls, without steel columns, beams and connecting beams are made of automatic submerged arc welding H-shaped steel, roof panels are sandwich profiled steel plates, and purlins are used to form a steel structure roof truss, steel beams are made of Q435 materials, and splice plates are made of 10.9 grade high-strength bolts