-
Method Statement for Derrick Installation and Demolition Method Statement for Derrick Installation and Demolition Method Statement for Derrick Installation and Demolition -
Derrick installation and removal construction design scheme The project is composed of 9 buildings and an underground garage. It is a six storey brick concrete structure, most of which are 17.85 meters high. The materials and erection of shaped steel grillage are used, which meets the requirements of JGJ59-99 Standard for Safety Inspection of Building Construction. The erection height of the derrick is 20.85 meters. -
Construction scheme for installation and removal of common derrick The project is composed of 9 buildings and an underground garage. It is a six storey brick concrete structure, most of which are 17.85 meters high. The materials and erection of shaped steel grillage are used, which meets the requirements of JGJ59-99 Standard for Safety Inspection of Building Construction. The erection height of the derrick is 20.85 meters. -
Method Statement for Derrick Installation and Demolition The project is composed of 9 buildings and an underground garage. It is a six storey brick concrete structure, most of which are 17.85 meters high. The materials and erection of shaped steel grillage are used, which meets the requirements of JGJ59-99 Standard for Safety Inspection of Building Construction. The erection height of the derrick is 20.85 meters. The derrick used in this project is provided by a professional manufacturer with high reputation and quality and is installed by the company's professional -
Construction Scheme for Derrick Installation and Demolition of a Six storey Residential Project This data is the construction plan for the installation and removal of the derrick of a six storey residential project, which is detailed and can be used for reference. -
Detailed construction organization design scheme for derrick installation and removal The project is composed of 9 buildings and an underground garage. It is a six storey brick concrete structure, most of which are 17.85 meters high. The materials and erection of shaped steel grillage are used, which meets the requirements of JGJ59-99 Standard for Safety Inspection of Building Construction. The erection height of the derrick is 20.85 meters. -
Construction Scheme for Derrick Installation and Demolition in a City The project is composed of 9 buildings and an underground garage. It is a six storey brick concrete structure, most of which are 17.85 meters high. The materials and erection of shaped steel grillage are used, which meets the requirements of JGJ59-99 Standard for Safety Inspection of Building Construction. The erection height of the derrick is 20.85 meters. -
Construction Scheme for Derrick Installation and Demolition of a Hardware Machinery Plant in Lanzhou Lightning rod shall be set up for the well, which shall be grounded separately. Safety enclosure shall be set. Safety self falling door shall be set at the entrance of the bottom floor. Safety door shall be set at the inlet and outlet of the hanging tray. Angle steel shall be used for welding between the derrick and the floor ring beam. One shall be set every two floors -
Construction scheme for tower crane installation and removal This plan includes foundation construction, installation, wall attachment and removal of tower cranes. -
Construction scheme for tower crane installation and removal Construction scheme for installation and removal of tower crane: the tower crane adopts C35 reinforced concrete foundation, and the foundation drawings are provided by the construction unit according to the requirements of the instructions. The installation of tower crane is allowed only when the concrete strength reaches 75% or more of the concrete strength before installation -
Method statement for installation and removal of passenger and freight elevators According to the needs of the site, the lift foundation adopts the scheme that the concrete foundation is basically equal to the installation ground, and the sill height between the ground and the cage is solved by filling up the external ground height. The foundation specification of SD200/200 construction elevator is 6000 × 4000 × 300 (thickness), and the concrete strength grade is C35; Double layer two-way Φ 12 @ 19 reinforcement -
Construction scheme for installation and removal of hanging basket This data is: Construction Scheme for Installation and Demolition of Hanging Basket, which is detailed and can be used for reference. -
Method Statement for Derrick Installation and Disassembly Method Statement for Derrick Installation and Disassembly Method Statement for Derrick Installation and Disassembly -
Construction scheme for installation and removal of tower crane Construction Tower Crane Installation and Demolition Method Statement Construction Tower Crane Installation and Demolition Method Statement Construction Tower Crane Installation and Demolition Method Statement -
Construction scheme for stacking, installation and removal of large formwork Method Statement for Stacking, Installation and Removal of Large Formwork Method Statement for Stacking, Installation and Removal of Large Formwork -
Construction scheme for installation and removal of electric furnace in a steel plant Control system: composed of operating system and computer system, it is divided into two levels of control to control the working procedures, protection scope and process flow of steelmaking and continuous casting. -
Construction Scheme for Installation and Demolition of Static Pressure Pile Driver Project name: earthworks for reconstruction and expansion of 390 Yonghe Road Plant Building area: about 14885 square meters Project location: within the Feile Park, 390 Yonghe Road, Zhabei District, Shanghai The content of this plan is the installation and removal of a JZYD-250 static pile driver during the construction of pile foundation. QY-35 steam turbine is required for installation and removal -
Gantry crane installation and removal method statement This document is the construction scheme for the installation and removal of gantry crane, which is complete and detailed, and can be downloaded by designers for reference -
Gantry installation and removal method statement The construction area of the project is 16000 square meters. The building model is "load" type. The B2 # building is 20.7m high. According to the project characteristics and construction period requirements, a gantry is set on the north side of B2 #, and the specific location between axis C-5 and axis C-7 is shown in the figure (see the attached figure). -
Construction Scheme for Derrick Installation and Dismantling in an Area 6 # building and 13 # building have only 8 floors and 12 floors respectively, with the height of 24.8m and 37.3m, so the vertical transportation facilities for the construction of these two buildings are derrick (JJ-54 cargo construction elevator). -
Special construction scheme for installation and removal of construction elevator Hongguang Chengbang District C Project consists of 3 buildings, including 1 # building with 28 floors of office building; Building # 2 is a 34 storey residential building; Building # 3 is a 6-storey office building, building # 1 is a frame core tube structure, building # 2 is a shear wall structure, and building # 3 is a frame structure. The standard floor height of Building 1 # is 3.4m, the total height of the building is 99.9m, and the standard floor height of Building 2 # is 2 -
Detailed construction scheme for elevator installation, removal and splicing The construction elevators will be arranged in stages throughout the structural construction phase, and the number of elevators will gradually increase with the rise of the structural height. Especially after the core barrel is constructed to 300m, because of the transportation needs of the subsequent decoration works and the conversion factors between the construction elevator and the permanent elevator, in principle, there will always be 4 elevators in operation, This not only meets the requirements of personnel and materials during construction -
Detailed installation and removal method statement of electric basket This project is a residential building for relocation, with a construction area of 38000 square meters, 2 floors underground and 15 floors above the ground. The total height of the building is 46m, the indoor and outdoor height difference is 0.6m, the foundation is reinforced concrete raft foundation, the structure is full cast-in-place shear wall structure, and the seismic grade is Grade II. -
Special construction scheme for installation and removal of construction elevator The project is located in Block A02, Xinjin District, Shantou City, Guangdong Province. The basement is a floor, and the podium is a shop, which adopts a frame structure. The main buildings 3 #, 5 #, 6 # and 7 # have 32 floors above the ground. The first floor is 4.85 meters high, the second floor is 3.15 meters high, the third to 32 floors are 3 meters high, and the main body is 98.15 meters high. The shear wall structure is adopted. Total building area -
Detailed special construction scheme for tower crane installation and removal The project requires that the foundation bearing capacity is greater than 200KN/m2, the rebar depth is greater than 1.3m, and the inclination and flatness error of the four anchor columns on the foundation is less than 1/500 (the levelness of the foundation top surface is less than 1/500). The power distribution box for tower crane shall be set independently and 5 meters away from the tower crane. -
Complete construction scheme for scaffold installation and removal The project is composed of 9 rooms and an underground garage, with six floors. The structure is brick concrete structure, with a total height of 17.85m, and is an ordinary scaffold below 30m. Therefore, single standing and double row steel pipe scaffolds are used for erection; According to the construction requirements of JGJ59-99 Standard for Safety Inspection of Building Construction, the safety and reliability of structure and exterior decoration construction can be ensured. -
Method statement for installation and removal of unloading platform The project is located in Maipu Village, Jianxin Town, Cangshan District, Fuzhou City (in Fuzhou Maipu Primary School), and consists of civil works, water and electricity installation works and outdoor auxiliary overall works. The total building area is 1995 ㎡, and the building area is 820.3 ㎡. The teaching building has four floors above the ground, and the first to fourth floors are classrooms. The height of the first to fourth floors is 3.6m, and the total height of the building -
Special construction scheme for installation and removal of construction elevator Special construction scheme for installation and removal of construction elevators Special construction scheme for installation and removal of construction elevators Special construction scheme for installation and removal of construction elevators -
Gantry installation and removal construction scheme of a project This paper is a construction scheme for the installation and removal of a gantry, which is composed of two columns and a ceiling beam (beam). Angle steel L50 × 5, L30 × 5 for column frame. The width of the column is 400mm, the lattice height of the column is 660mm, and the height of each section of the column is 4000mm. Deadweight of gantry T=1.5t, erection height H=27m, lifting capacity of gantry W=1 -
Method statement for installation and removal of material elevator According to the construction scheme for installation and removal of material hoist, the self elevating material hoist produced by Liaoyuan Anshun Tower Crane Installation Co., Ltd. is selected as the material hoist for this project. Jinjin No.: Q702880-2010, with Safety Production License issued by Jilin Provincial Department of Construction, Business License of Enterprise Legal Person issued by Liaoyuan Administration for Industry and Commerce, Tianjin Construction Machinery Co., Ltd -
Construction Scheme for Removal, Installation and Hoisting of a Heat Exchanger in Jilin Dismantle one heat exchanger H-1012, with specification of 1000 * 7171 * 14, weight of 9.116t, installation elevation of 12m, installation height of 14m and heat exchange area of 350m2. Dismantle the auxiliary pipeline for about 100m. Dismantle and install one heat exchanger H-201B, specification 1200 * 7300 * 8, weight 9.116t, installation -
Special construction scheme for safety of mixing plant installation and removal This document is a special construction plan for the installation and removal of the mixing plant. The document includes: the project sets up a JS1500B cement concrete mixing plant under the bridge that meets the standardization requirements and production needs. The concrete under the bridge used for the construction of the project is mixed and distributed centrally to ensure the quality of cement concrete. Common Bridge of Contract Section 5 of Hangzhou Bay Bridge North Link (Phase II) Project -
Special construction scheme for installation and removal of high-rise tower crane Wind the lifting wire rope, install the short pull rod and the long pull anus to connect with the top of the tower cap, loosen the wire rope of the hoist, slowly level the boom, keep the pull rod in tension, and loosen the lifting wire rope on the pulley block -
Construction Scheme for Boiler Demolition and Equipment Installation in a Boiler House Content introduction Boiler removal → boiler body installation → platform ladder installation → body pipeline, valve and instrument installation → boiler body hydrostatic test → economizer installation → dust remover installation → induced draft fan installation → flue and chimney installation → blower installation → pump installation → slag extractor installation → grate reducer and transmission device installation → circuit Installation of electrical control cabinet → oven drying and boiling -
Special construction scheme for installation and removal of construction elevators in a community Hongguang Chengbang District C Project consists of 3 buildings, including 1 # building with 28 floors of office building; Building # 2 is a 34 storey residential building; Building # 3 is a 6-storey office building, building # 1 is a frame core tube structure, building # 2 is a shear wall structure, and building # 3 is a frame structure. The standard floor height of Building 1 # is 3.4m, the total height of the building is 99.9m, and the standard floor height of Building 2 # is 2 -
Construction scheme for installation and removal of construction elevator in office building The construction and installation project of XXXX Group Customer Service Center (Xi'an) is a large building integrating office, training, activities and accommodation. Designed by XXXX Architectural Design and Research Institute (Group) Co., Ltd. The total construction area is 99162 square meters; The number of building floors is one underground floor, the two comprehensive office buildings are eleven floors above the ground, the accommodation building is six floors above the ground, and the training building is five floors above the ground -
Method statement for installation and removal of 45T gantry crane The section between Yungu Road Station and Nanning Road Station is a shield section. The section line is laid southward along the planned Luzhou Avenue. The section line is mainly composed of wasteland and paddy fields. The line goes under the planned Minjiang Road and the planned Xuhe River. There is no pipeline above this section. The tunnels in this section are two single tunnel single track circular tunnels, both of which are constructed by shield method. The interval between the section lines varies from 12m to 15m from north to south; section
-
one Special construction scheme for derrick -
two Construction scheme of building derrick -
three Demolition and installation method statement -
four Demolition and installation method statement -
five Method Statement for Derrick Erection and Demolition -
six Method Statement for Derrick Fabrication and Installation -
seven Special construction scheme for installation and removal -
eight Construction scheme for removal and installation of curtain wall