-
Construction Scheme for Installation of Pipeline and Equipment of an Indoor Fire Gas Extinguishing System This engineering standard is applicable to important machine rooms, treasure houses, archives and other buildings. Halon gas fire extinguishing system pipes and equipment installation works are used for indoor fire fighting. Halon fire extinguishing agents are non-conductive and pollution-free, but only in confined spaces can they achieve good results. -
Construction scheme for process pipe and equipment installation in workshop Water pipes, compressed air pipes, steam pipes, condensate recovery pipes, negative pressure pipes, sewage pipes, dust removal pipes (including process dust removal, environmental dust removal and screening dust removal), and moisture discharge pipes for all equipment of wire making and rolling; Purchase and manufacture of cables and bridge materials behind the power cabinet, and materials and standard parts of finished pipe supports and hangers; Manufacturing of process and power pipe network system; Power station building and water -
Construction Scheme for Indoor Fire Pipe and Equipment Installation This project is the fire-fighting reconstruction project of Heluoshijia · Fanghuayuan, including the replacement of the main road, valves, fire hydrants, water pump adapters, and the installation of fire hydrant boxes in the commercial street. -
Construction scheme for installation of indoor fire pipeline and equipment The specifications and models of the alarm valve, action valve, control valve, retarder, water flow indicator, water pump adapter and other main components of the fire sprinkler system of the Project shall meet the design requirements, with complete accessories, regular casting, smooth surface, no cracks, flexible opening and closing, and factory certificate. -
Construction Scheme for Installation of Heating and Sanitation Equipment and Pipes When reserving holes, holes, grooves and embedded parts on concrete floors, beams and walls in this project, special personnel shall be assigned to measure the position and elevation dimensions of pipes and equipment according to the design drawings, mark the positions of holes, fix the prefabricated mold boxes and embedded iron parts firmly according to the marks before binding the reinforcement, insert paper balls and other objects into the boxes, and assign special personnel to coordinate the calibration during the concrete pouring process, and watch the pipe mold boxes Embedded parts, -
Construction scheme for installation of pump equipment Content introduction This document is the construction scheme for the installation of the machines and pumps in the acetylene plant of a project. There are 35 sets of organic pump equipment in this project, all of which are domestic machines and pumps. The scheme is designed and disclosed from the aspects of construction conditions, equipment installation measures, installation technical requirements, quality requirements, etc. -
Construction scheme for water supply equipment installation Water supply equipment installation method statement Water supply equipment installation method statement Water supply equipment installation method statement -
Construction scheme for HVAC equipment installation This project is Tongling non-ferrous copper smelting process technology transformation ("double flash" plant project) batching and transportation equipment and air duct installation project, designed by China Nerin Engineering Technology Co., Ltd., and the construction site is in the batching and transportation plant in the smelting area. -
Construction scheme of equipment pipeline insulation The project will implement the project method construction, establish a reasonable, capable and efficient project management department, fully perform the contract, organize, command, manage, coordinate and control the project construction, coordinate the internal and external and personnel relations, and play various business functions -
Equipment installation construction scheme of a water plant This document is a construction plan for the installation of equipment in a water plant, including the catalog and detailed instructions. It is complete and has reference value, and can be downloaded for use. -
Anticorrosion construction scheme of a pipeline and equipment The asphalt for cold primer oil in this project is No. 30 A construction petroleum asphalt. Before boiling, cut the asphalt into small pieces of less than 1.5kg, put them into a clean asphalt pan, gradually raise the temperature and mix them, and keep the temperature within 180~200 ℃ (the maximum temperature shall not exceed 220 ℃). Generally, it should be boiled at this temperature for 1.5~2.5 hours until -
Model construction scheme for installation of indoor fire pipeline and equipment This document is a model construction scheme for the installation of indoor fire fighting pipes and equipment, including the scope, construction preparation, operation technology, quality standards, etc. It is detailed and can be used for reference. -
Construction scheme for installation of pipes and equipment of air conditioning system Scheme name: construction scheme for installation of pipes and equipment of air conditioning system The equipment of this ventilation and air conditioning project mainly includes chilled water pump, cooling water pump, centrifugal water chiller, cooling tower, axial flow fan, combined air cabinet and other equipment. Large equipment is arranged on the first floor underground and on the roof, and the amount of equipment installed in the whole project is large. 1. General flow chart of ventilation and air conditioning construction -
Construction scheme for installation of electrical pipeline equipment in a city The main contents of the three electricity installation of the project include: cooperating with civil engineering to embed electrical pipes and various embedded parts; Install cable bridge, traveling crane, sliding contact line and plant lighting in unit basement and tunnel; Installation of cable bridge, lighting, panel, box and cabinet equipment and busbar in the electrical room (control room); Installation of three electric equipment of the unit; Cable laying, wiring and other engineering contents. -
Construction Scheme for Electrical Installation of Liquefaction Equipment Engineering of a Gas Company This scheme is applicable to the construction of the electrical installation works of the 40000 m3/h oxygen generator+230 TPD liquefaction equipment project of * * * Gas Company. The electrical installation works run through the construction works, industrial equipment and automatic control equipment, covering electrical lightning protection, power transformation and distribution, power piping, cable, bridge, equipment construction and electrical system commissioning, if involving other professional construction -
Equipment pipeline anti-corrosion and thermal insulation construction scheme Establish the project department of equipment pipeline anti-corrosion and insulation works to implement in accordance with the national project management specifications, earnestly perform the responsibilities of the project manager department required by the national project management specifications, select elite and strong generals, select a reasonable installation construction team, and provide reliable assurance in resources, technology, management, etc. Safety, quality, progress, training, commissioning, investment -
Long distance pipeline installation construction scheme Content introduction 1 Pipeline construction process and requirements 1.1 Pipeline construction process includes: surveying and setting out, removing obstacles, detecting underground obstacles, repairing construction work belts and access roads, excavation of pipe trenches, pipeline anti-corrosion insulation, pipe fitting prefabrication, transportation of anti-corrosion pipes, on-site pipe layout, pipeline assembly and welding, non-destructive testing, anti-corrosion joint coating and leak detection, pipeline laying, backfilling, and landform -
Construction Scheme for Electrical Installation of Gas Project 1.1 The electrical construction scope of ×××× gas project includes: power distribution room, clean gas room, air compressor room, hydrogen station, argon station, etc. 1.2 Main work contents of electrical installation include: power distribution, lighting distribution, grounding works 1.3 Process equipment, pipeline construction period is relatively tight, the peak period of electrical construction will be compressed to September and October, and cross operation -
Method statement for installation of boiler and auxiliary equipment The boiler must have drawings, product certificates, installation and operation instructions, and quality supervision and inspection certificates issued by the labor department. The technical data shall be consistent with the real object. -
Process pipe installation construction scheme The working media in this project are mainly brine, salt slurry, nitrate slurry, condensate, cooling circulating water, low-pressure steam, etc. Their common characteristics are low working pressure (generally not more than 1MPa), and low working temperature (not more than 200 ℃). Therefore, according to the classification standard, they are Class D pipes. The quality requirements of pipe welding joints are not lower than Class IV welds, but the bittern media have very strong -
Fire fighting equipment installation construction scheme This document is about the installation of 016 fire fighting equipment, which is complete and detailed, and can be downloaded by designers for reference. -
Example of pipeline installation construction scheme This document is the construction scheme of pipeline installation, which is detailed and can be downloaded for reference. -
Construction scheme for installation of fan equipment This device has fan type equipment, including centrifugal type, axial flow type and others. There are sets of imported equipment, which are manufactured by * * * factory. Others are domestic equipment, manufactured by * * * factory. -
Construction scheme for installation of special equipment 4.1 Welding: 4.1.1 Welding procedure qualification: PD24-05 plate to plate butt argon arc welding, material 00Cr17Ni14Mo2; (Annex 1) 4.1.2 Welding process. (Annex 2) 4.1.3 The welding of special equipment shall be performed by welders with valid welder certificates of corresponding categories. (Annex 3) 4.1 -
Construction scheme for process equipment installation The storage and transportation of aluminum hydroxide mainly includes 5 belt conveyors, 1 grab bridge crane, 1 AH packing machine, etc. The aluminum hydroxide from the aluminum hydroxide filtration system is transported to the aluminum hydroxide storage bin through S001 and S002 belt conveyors in sequence, passing through two receiving bins respectively, one part of aluminum hydroxide powder is packaged through AH packaging machine, and the other part is packaged through S003 -
Construction scheme for procurement and installation of main equipment Provide one group of glass fiber reinforced plastic cooling towers according to the technical requirements, and be responsible for equipment design, manufacturing, transportation (including insurance), on-site unloading, installation (including on-site installation of cranes/shovels and other machinery, and the Bid Inviter is responsible for equipment foundation manufacturing), on-site storage, commissioning, training (including assessment and certification) during installation, until the equipment is delivered for use (including oil required for equipment operation, etc.), This project -
Equipment installation construction scheme of an industrial project There are about 729 sets of equipment installed in the project. The types of equipment are as follows: tower equipment, tank containers, heat exchangers, chemical pumps, compressors, filters, reactors, augers, agitators, etc. The project has many types of equipment, large installation quantities, tight construction period, and the installation time is in winter. This plan is prepared to ensure that the project can be completed safely and orderly with quality and quantity guaranteed -
Construction scheme for busbar and equipment lead installation Equip machines and tools, installation tools, safety protection appliances, etc. according to the lifting measures, conduct a comprehensive inspection of the tools and appliances, and confirm that the maintenance performance of each tool and appliance is good and the periodic inspection is effective before use -
Construction scheme for steam pipeline installation The construction scheme for steam pipeline installation is applicable to the construction and acceptance of steam pipeline installation works with working pressure less than or equal to 1.6MPa and medium temperature less than or equal to 350 ℃. -
Construction Scheme for Industrial Pipeline Installation Industrial pipeline installation construction scheme Industrial pipeline installation construction scheme Industrial pipeline installation construction scheme -
Construction scheme for electrical equipment installation The main contents of three electricity installation in this section include: supporting civil engineering to bury electrical pipes and various embedded parts; Install cable bridge, traveling crane, sliding contact line and plant lighting in unit basement and tunnel; Installation of cable bridge, lighting, panel, box and cabinet equipment and busbar in the electrical room (control room); Installation of three electric equipment of the unit; Cable laying, wiring and other engineering contents. The installation construction will be carried out according to the -
Construction Scheme for Pipeline Installation of the Project This plan describes the installation process of the aboveground pipeline in the fourth area of the IIP project. The main construction steps include: pipeline installation, pipeline flushing, pipeline pressure test, pipeline anti-corrosion and thermal insulation. Since the middle and low pressure steel pipes account for most of the quantities of the project, this scheme focuses on the installation process of middle and low pressure steel pipes. For a small amount of anti-corrosion non-metallic pipes in the project -
Construction scheme for installation of a process pipe Project name: waste water treatment and reuse device of Zhongtian Hechuang Ordos Coal Deep Processing Demonstration Project. The project is a new project invested by Zhongtian Hechuang Energy Co., Ltd. and supervised by Zhenhai Petrochemical Co., Ltd. The design and general contractor is Beijing Yanshan Yulong Petrochemical Engineering Co., Ltd. The construction unit is Shandong Liaocheng Beijite Environmental Protection Engineering Co., Ltd. -
Construction scheme of polyurethane equipment pipeline insulation The directly buried insulation pipe, also known as "pipe in pipe", is composed of a "two-step method", which is composed of high-density polyethylene outer protective layer, polyurethane rigid foam plastic insulation material and steel pipes. The insulation layer is made of rigid polyurethane foam with a density of 60kg/m3 to 80kg/m3, which can fully fill the gap between the steel pipe and the casing, and has a certain bonding strength, so that the steel pipe -
Construction scheme for installation of electrical equipment The main contents of three electricity installation in this section include: supporting civil engineering to bury electrical pipes and various embedded parts; Install cable bridge, traveling crane, sliding contact line and plant lighting in unit basement and tunnel; Installation of cable bridge, lighting, panel, box and cabinet equipment and busbar in the electrical room (control room); Installation of three electric equipment of the unit; Cable laying, wiring and other engineering contents. The installation construction will be carried out according to the -
Construction Scheme for Anticorrosion and Thermal Insulation of an Equipment Pipeline 1.4.1 Implement the project manager responsibility system, and the project manager is responsible for the overall management of the whole project implementation process. 1.4.2 The project technical director is responsible for the overall technical work and external technical liaison during the project implementation. 1.4.3 The Engineering Technology Department and the Quality Inspection Department shall strictly control the project quality to further ensure that -
Construction Scheme 1 for Electrical Equipment Installation Construction scheme document for electrical equipment installation -
Boiler and auxiliary equipment installation method statement 1 Boiler and auxiliary equipment installation construction scheme document -
[Sichuan] Workshop Process Pipe and Equipment Installation Construction Scheme (Luban Prize) Content introduction This manuscript is the construction scheme for the installation of the process pipeline of the silk making and package making, the process power pipe network and equipment installation of the cigarette production line in a cigarette workshop in Sichuan; The construction scope of the project includes water pipes, compressed air pipes, steam pipes, condensate recovery pipes, negative pressure pipes, sewage pipes, dust removal pipes (including process dust removal, environmental dust removal and screening dust removal) -
Construction scheme for electromechanical equipment installation This project is the mechanical and electrical engineering construction of the ore conveying system project of Majishan Port Expansion Project
-
one Equipment and pipeline construction scheme -
two Pipeline and equipment construction scheme -
three Equipment installation construction scheme -
four Equipment installation and construction scheme -
five Construction drawing of gas processing equipment -
six Pipeline installation construction scheme -
seven Pipeline equipment installation construction scheme -
eight Equipment installation pipeline construction scheme