-
Equipment installation construction scheme of a water plant This document is a construction plan for the installation of equipment in a water plant, including the catalog and detailed instructions. It is complete and has reference value, and can be downloaded for use. -
Construction organization design scheme for purification equipment installation part of a water plant in Fushun Construction team (group): strengthen the quality management of the team (group) and do a good job in quality self inspection; The construction personnel shall abide by the process discipline and operate in strict accordance with the requirements of the process regulations and operating procedures -
Construction organization design scheme for equipment installation of a water plant in Weihai The chain wheel groove of chain electric hoist shall be kept on the same vertical surface, and the chain shall not be twisted, stuck or severely worn during operation -
Construction organization design scheme for equipment installation project of a 150000 ton water plant in Jinan Dewatering machine room: installation of lifting rails for sludge pipeline, water supply pipeline and items G and F in the equipment list as described in the material list -
Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city -
Construction scheme for water supply equipment installation Water supply equipment installation method statement Water supply equipment installation method statement Water supply equipment installation method statement -
Construction scheme for installation of a water plant According to the construction scheme of the installation part of a water plant, our company will bid for the construction content of the installation project according to the division of the bidding scope. The main contents include the installation, commissioning, operation inspection and completion acceptance of distribution well, pre sedimentation tank, sedimentation tank, V-shaped filter, blower room backwash pump room and its ancillary works. -
Construction scheme for installation of pump equipment Content introduction This document is the construction scheme for the installation of the machines and pumps in the acetylene plant of a project. There are 35 sets of organic pump equipment in this project, all of which are domestic machines and pumps. The scheme is designed and disclosed from the aspects of construction conditions, equipment installation measures, installation technical requirements, quality requirements, etc. -
Construction scheme for HVAC equipment installation This project is Tongling non-ferrous copper smelting process technology transformation ("double flash" plant project) batching and transportation equipment and air duct installation project, designed by China Nerin Engineering Technology Co., Ltd., and the construction site is in the batching and transportation plant in the smelting area. -
Method statement for installation of boiler and auxiliary equipment The boiler must have drawings, product certificates, installation and operation instructions, and quality supervision and inspection certificates issued by the labor department. The technical data shall be consistent with the real object. -
Construction scheme for installation of a water plant in a city This document is the construction scheme for installation of a water plant in a city. The content is detailed and can be used for reference. -
Fire fighting equipment installation construction scheme This document is about the installation of 016 fire fighting equipment, which is complete and detailed, and can be downloaded by designers for reference. -
Construction scheme for installation of fan equipment This device has fan type equipment, including centrifugal type, axial flow type and others. There are sets of imported equipment, which are manufactured by * * * factory. Others are domestic equipment, manufactured by * * * factory. -
Construction scheme for installation of special equipment 4.1 Welding: 4.1.1 Welding procedure qualification: PD24-05 plate to plate butt argon arc welding, material 00Cr17Ni14Mo2; (Annex 1) 4.1.2 Welding process. (Annex 2) 4.1.3 The welding of special equipment shall be performed by welders with valid welder certificates of corresponding categories. (Annex 3) 4.1 -
Construction scheme for process equipment installation The storage and transportation of aluminum hydroxide mainly includes 5 belt conveyors, 1 grab bridge crane, 1 AH packing machine, etc. The aluminum hydroxide from the aluminum hydroxide filtration system is transported to the aluminum hydroxide storage bin through S001 and S002 belt conveyors in sequence, passing through two receiving bins respectively, one part of aluminum hydroxide powder is packaged through AH packaging machine, and the other part is packaged through S003 -
Construction scheme for procurement and installation of main equipment Provide one group of glass fiber reinforced plastic cooling towers according to the technical requirements, and be responsible for equipment design, manufacturing, transportation (including insurance), on-site unloading, installation (including on-site installation of cranes/shovels and other machinery, and the Bid Inviter is responsible for equipment foundation manufacturing), on-site storage, commissioning, training (including assessment and certification) during installation, until the equipment is delivered for use (including oil required for equipment operation, etc.), This project -
Construction scheme for installation of a water plant in a city In the construction scheme for the installation part of a water plant in a city, the * * expansion project is to expand [XXXX] with the scale of [XXXX] ten thousand m3/d, which is designed by [XXXX]. It uses the grid flocculation inclined pipe sedimentation and siphon backwash sludge discharge, V-shaped filter, chlorination disinfection and blower, air compressor, backwash pump with backwash and other water purification processes. -
Construction Scheme 1 for Electrical Equipment Installation Construction scheme document for electrical equipment installation -
Boiler and auxiliary equipment installation method statement 1 Boiler and auxiliary equipment installation construction scheme document -
Construction scheme for electrical equipment installation The main contents of three electricity installation in this section include: supporting civil engineering to bury electrical pipes and various embedded parts; Install cable bridge, traveling crane, sliding contact line and plant lighting in unit basement and tunnel; Installation of cable bridge, lighting, panel, box and cabinet equipment and busbar in the electrical room (control room); Installation of three electric equipment of the unit; Cable laying, wiring and other engineering contents. The installation construction will be carried out according to the -
Equipment installation construction scheme of an industrial project There are about 729 sets of equipment installed in the project. The types of equipment are as follows: tower equipment, tank containers, heat exchangers, chemical pumps, compressors, filters, reactors, augers, agitators, etc. The project has many types of equipment, large installation quantities, tight construction period, and the installation time is in winter. This plan is prepared to ensure that the project can be completed safely and orderly with quality and quantity guaranteed -
Construction scheme for installation of electrical equipment The main contents of three electricity installation in this section include: supporting civil engineering to bury electrical pipes and various embedded parts; Install cable bridge, traveling crane, sliding contact line and plant lighting in unit basement and tunnel; Installation of cable bridge, lighting, panel, box and cabinet equipment and busbar in the electrical room (control room); Installation of three electric equipment of the unit; Cable laying, wiring and other engineering contents. The installation construction will be carried out according to the -
Construction scheme for busbar and equipment lead installation Equip machines and tools, installation tools, safety protection appliances, etc. according to the lifting measures, conduct a comprehensive inspection of the tools and appliances, and confirm that the maintenance performance of each tool and appliance is good and the periodic inspection is effective before use -
Construction scheme for electromechanical equipment installation This project is the mechanical and electrical engineering construction of the ore conveying system project of Majishan Port Expansion Project -
Construction scheme for process pipe and equipment installation in workshop Water pipes, compressed air pipes, steam pipes, condensate recovery pipes, negative pressure pipes, sewage pipes, dust removal pipes (including process dust removal, environmental dust removal and screening dust removal), and moisture discharge pipes for all equipment of wire making and rolling; Purchase and manufacture of cables and bridge materials behind the power cabinet, and materials and standard parts of finished pipe supports and hangers; Manufacturing of process and power pipe network system; Power station building and water -
Construction scheme of electrical equipment installation in a steel plant This project is based on the water sealed zipper of the ironmaking branch. The operation and use of the cold screen equipment is a technical transformation project to meet the requirements of the branch factory to continuously improve its production capacity -
Equipment installation construction scheme of a petrochemical project in Nanjing The equipment installation construction scheme of a petrochemical project in Nanjing is rich and detailed, and can be downloaded for reference and study by netizens. -
Construction scheme of an industrial equipment installation company According to the construction scheme of an industrial equipment installation company, this project is led to the high-voltage distribution room on the second floor by two high-voltage incoming lines, and two independent 10KV high-voltage power supplies provided by the municipal power supply. NXAIR handcart switch cabinet is used for high-voltage power distribution. Low voltage distribution adopts air circuit breaker and withdrawable combination switchgear. The system adopts single bus section operation mode. -
Equipment installation construction scheme of a pulp and paper industry In the construction scheme for the installation of equipment in a pulp and paper industry, the Yangpu Phase I Plant Construction Project of Pulp Forest Plan is located in Zone D12, Yangpu Free Trade Economic Development Zone, Hainan Island. The daily output of 1800Ton/Day (annual output of 630000ADT/Annual) mixed with artificial forestation bleached kraft pulp is taken as the design basis -
Construction scheme for process equipment installation The aluminum hydroxide from the aluminum hydroxide filtration system is transported to the aluminum hydroxide storage bin through S001 and S002 belt conveyors in sequence, passing through two receiving bins respectively. One part of the aluminum hydroxide powder is packaged by AH packaging machine, and the other part is transported to the aluminum hydroxide roasting system through S003, S004 and S005 belt conveyors. -
Construction Scheme for Indoor Fire Pipe and Equipment Installation This project is the fire-fighting reconstruction project of Heluoshijia · Fanghuayuan, including the replacement of the main road, valves, fire hydrants, water pump adapters, and the installation of fire hydrant boxes in the commercial street. -
Construction Scheme for Installation of Building Electrical Equipment This document is a construction plan for the installation of electrical equipment in buildings, with a total of 20 pages. This plan is only applicable to the electrical installation construction, mainly including the installation of high and low voltage panel cabinets, DC devices, capacitance compensation devices, analog screens, protection screens, frequency conversion cabinets, cable lines, grounding and other electrical devices. It is a work guidance document. -
Method statement for installation of rotating equipment of boiler unit Brief introduction to the construction scheme for the installation of dynamic equipment of boiler device: the project is the installation of auxiliary dynamic equipment for 75T/h boiler device of XX million t/a methanol project -
Construction scheme for installation of boiler and auxiliary equipment in a city The constructors of the Project shall be familiar with the drawings of boiler and auxiliary equipment, installation and operation instructions, and design drawings of boiler room, and check whether there are review and approval signatures of local labor, environmental protection, coal saving and other departments on design, manufacturing, installation, construction, etc. in the technical documents. -
Construction scheme for installation of indoor fire pipeline and equipment The specifications and models of the alarm valve, action valve, control valve, retarder, water flow indicator, water pump adapter and other main components of the fire sprinkler system of the Project shall meet the design requirements, with complete accessories, regular casting, smooth surface, no cracks, flexible opening and closing, and factory certificate. -
Construction Scheme for Installation of Heating and Sanitation Equipment and Pipes When reserving holes, holes, grooves and embedded parts on concrete floors, beams and walls in this project, special personnel shall be assigned to measure the position and elevation dimensions of pipes and equipment according to the design drawings, mark the positions of holes, fix the prefabricated mold boxes and embedded iron parts firmly according to the marks before binding the reinforcement, insert paper balls and other objects into the boxes, and assign special personnel to coordinate the calibration during the concrete pouring process, and watch the pipe mold boxes Embedded parts, -
Construction Scheme for Installation of Elevator Electrical Equipment The length of the traveling cable of the project shall be based on the actual position of the central line box and the junction box at the car bottom; In addition, the binding length and wiring allowance of two cable supports shall be determined. Ensure that the cable will not be tensioned when the car group bottom or the top is hit, and will not rub the car and the ground during normal operation; When squatting at the bottom, it is better to stay 100~200mm away from the ground with the cable. -
Construction scheme for equipment installation of a cement production line In this project, the support ring is respectively sleeved on the main and driven roller shafts and fixed with keys. Before installing the damping rubber block, the support ring, roller body, rubber damping block and the contact surface should be carefully cleaned with alkaline water to eliminate any oil stains and ensure the friction between rubber and metal materials. -
Detailed construction scheme for installation of boiler and auxiliary equipment This document is a construction plan for the installation of boiler and auxiliary equipment of a project, which introduces the installation process in detail, totaling 22 pages. -
Construction scheme and process method of fountain equipment installation The water pump shall be cleaned and inspected according to the specifications before installation. Only the external surface of the pump shall be cleaned within the factory rust proof warranty period. When the rust prevention warranty period is exceeded or there are obvious defects, the disassembly, cleaning and inspection shall comply with the provisions of the equipment technical documents. Cleaning and inspection of split pump: the main parts, components and auxiliary facilities of the pump, the middle cover and the packaged parts, and the end faces of the components shall be free of scratches and
-
one Construction Scheme for Sewage Plant Installation -
two Construction scheme for equipment installation of water plant -
three Installation and construction process of water plant equipment -
four Construction Scheme for Pipeline Installation of Water Plant -
five Construction scheme for elevator equipment installation -
six Rainy season construction scheme for equipment installation -
seven Winter construction scheme for equipment installation -
eight Construction scheme for equipment installation in winter