Method statement for installation of air preheater

Installation and construction design scheme of air preheater

For the 2 * 300WM unit of the second phase expansion project of XXXX Power Plant, each boiler is equipped with two three compartment rotary air preheaters, which are arranged on the 12.42m boiler steel frame between the H-J axis behind the boiler. The right side of the boiler is # 1 preheater, and the left side is # 2 preheater. Maximum geometric dimension of each air preheater: 11566

Air preheater installation construction organization design scheme

Air preheater installation construction organization design scheme Air preheater installation construction organization design scheme

Detailed construction organization design scheme for air preheater installation

For the 2 * 300WM unit of the second phase expansion project of the power plant, each boiler is equipped with two three compartment rotary air preheaters, which are arranged on the 12.42m boiler steel frame between the H-J axis behind the boiler. The right side of the boiler is # 1 preheater, and the left side of the boiler is # 2 preheater. Maximum geometric dimension of each air preheater: 11566 * 11563 * 6261 total weight

Construction organization design scheme of air preheater installation in a city

Draw the upper and lower cross center lines of the lower beam on the lower beam according to the lower beam marking procedure, and make obvious marks with a punch. The center shall prevail. Draw the position line of the ring according to the drawing size, and mark the middle and both sides with a punch.

Air preheater installation construction organization design scheme.pdf

Air preheater installation construction organization design scheme (word format)

For the 2 * 300WM unit of the second phase expansion project of the power plant, each boiler is equipped with two three compartment rotary air preheaters, which are arranged on the 12.42m boiler steel frame between the H-J axis behind the boiler. The right side of the boiler is # 1 preheater, and the left side of the boiler is # 2 preheater. Maximum geometric dimension of each air preheater: 11566 * 11563 * 6261 total weight

A company's air preheater installation construction organization design scheme

This document is a company's air preheater installation construction organization design scheme. The content includes the general situation and progress of air preheater installation and construction. The content is detailed for reference only.

Design scheme of air preheater installation and construction organization for a high-grade residential building in Dalian

The distance from the outermost radial runout point of the drive shroud pin to the root of the big gear is 20 mm, and the maximum runout from the lower plane of the shroud pin shaft to the lower end face of the gear is 13 mm

Installation scheme of air preheater for a project

Description Two 2 × 130T/H circulating fluidized bed boilers are installed in the project. The boiler is a 450 ℃ circulating fluidized bed boiler with the model of ×× - 130/5.3 produced by ×× Boiler Factory. Each boiler is equipped with one air preheater. Two 2 × 130T/H circulating fluidized bed boilers are installed in the project, and the tube box air preheater is adopted. The preheater is divided into three layers

Construction Scheme for Installation of Frame Preheater in Cement Plant

Kiln tail frame and preheater are constructed at high altitude and in multiple layers, which must be carried out layer by layer from bottom to top. Equipment group installation, steel structure frame group installation, furnace building and other types of construction

Construction organization design of air preheater installation

Content introduction: 2 × 300WM units of the second phase expansion project of XX Power Plant. Each boiler is equipped with two three compartment rotary air preheaters, which are arranged on the 12.42m layer of boiler steel frame between the H-J axis behind the boiler. The right side of the boiler is No. 1 preheater, and the left side is # 2 preheater. The maximum geometric dimension of each air preheater is 11566 × 11563 ×

Construction scheme for tower crane foundation and installation

Three tower cranes are selected for this project, which are respectively arranged at 0A ～ 0B/9 ～ 10 axis, E ～ (2/C)/01 ～ 1 axis and 14 outer/K ～ (2/H) axis (see Figure 1 Tower Crane Layout Plan for specific locations). Two tower cranes are under the foundation raft, one tower crane is outside the building, and the tower bodies of 1 # and 2 # tower cranes pass through the underground four floors to

Selected construction scheme for water and electricity installation

This is the necessary information for the personnel engaged in construction electromechanical engineering. It is very good, and it is very practical information for both project managers and constructors

Construction scheme for tower crane installation and removal

This plan includes foundation construction, installation, wall attachment and removal of tower cranes.

Construction scheme for water supply equipment installation

Water supply equipment installation method statement Water supply equipment installation method statement Water supply equipment installation method statement

Special construction scheme for large glass installation

Special construction scheme for large glass installation, project overview, general construction deployment, platform 2 steel pipe rack checking, safety and civilized construction measures

Construction scheme for tower crane installation and removal

Construction scheme for installation and removal of tower crane: the tower crane adopts C35 reinforced concrete foundation, and the foundation drawings are provided by the construction unit according to the requirements of the instructions. The installation of tower crane is allowed only when the concrete strength reaches 75% or more of the concrete strength before installation

Tower crane foundation and installation construction scheme

This scheme is the technical scheme and requirements for the foundation and installation construction of QTZ5013 tower crane. The tower height is 50 meters, the arm length is 50 meters, and the center of the tower crane is 4.0 meters away from the wall. Tower crane can be full at this position

Installation construction scheme of a seismic isolation device

The key points of construction management are as follows, and the key points of installation and construction of isolation pads are as follows. (1) The embedded plate shall be set to ensure the horizontal accuracy of the embedded plate (installation accuracy: inclination angle below 1/500), and the embedded plate can be fixed with appropriate support. (2) The installation of isolation pad The suspension of isolation pad shall be carried out by means of 4-point suspension with wire rope to ensure the lifting operation

Installation and disassembly construction scheme of a tower crane

The tower cranes currently mobilized by the Project Department are angle steel QTZ40A (TC4807) hydraulic jack up tower cranes produced by Shandong Huaxia Group and designed in accordance with the national standard JG/T5037-1993 Classification of Tower Cranes. This machine is a multi-purpose tower crane with horizontal boom, trolley luffing and up slewing jack up. Nominal lifting torque 400KN M，

Installation construction scheme of a water plant in a city

Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city

Method statement for installation and removal of passenger and freight elevators

According to the needs of the site, the lift foundation adopts the scheme that the concrete foundation is basically equal to the installation ground, and the sill height between the ground and the cage is solved by filling up the external ground height. The foundation specification of SD200/200 construction elevator is 6000 × 4000 × 300 (thickness), and the concrete strength grade is C35; Double layer two-way Φ 12 @ 19 reinforcement

Construction scheme for installation of light partition wall

Appoint a comrade with strong sense of responsibility, high quality and rich practical experience as the special management director. The Project Department will implement unified management for the operation level according to the project management regulations, provide key guarantee and technical support in terms of human, financial and material resources

Construction Scheme for Electrical Instrument Installation

Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement

Method statement for installation and disassembly of hanging basket

This scheme is based on JGJ202-2010 Basis for Preparation of Hanging Basket Scheme for Work at Heights, the current Technical Specification for Safety of Building Construction Tools or Scaffolds, construction drawings and other relevant documents, and is formulated after site investigation and research and analysis of standard level drawings. The hanging basket is installed to the 18th floor according to the actual situation of the site

Rebar fabrication and installation method statement

Reinforcement fabrication and installation construction scheme, project overview, construction preparation, operation process, quality standards, and problems to be noted

Method statement for installation of bulk boiler

The bulk boiler is assembled at the construction site of the construction unit. The boiler installation has a large amount of work, many types of work required, complex construction technology, high technical requirements, long construction period, and scattered operation sites. During construction, the construction method of pre combination and interleaving operation shall be adopted as far as possible to reduce aerial work, so as to speed up the installation progress and shorten the construction period; Arrange pulley block in concrete frame, and use winch

Detailed construction scheme for elevator installation

The elevator is a square standard section, manufactured by Shanghai Baoda Construction Machinery Co., Ltd., model: SCD200/200J.

Construction scheme for electrical installation of a plant

The main structure of the project is a single storey steel structure workshop. This project is mainly responsible for the coordination and installation of the lighting system. Pipeline embedment works of weak current and fire fighting systems.

Construction Scheme for Cable Tray Installation

The material use plan shall be prepared according to the specifications and models required by the design, site investigation records and construction scheme, including the straight sections, bends, bridge accessories, supports and hangers of cable bridges of various specifications. Note that all materials required for cable tray installation shall be galvanized.

Water and electricity installation construction scheme of a hospital

This project is the outpatient and inpatient building of the affiliated hospital, which is located in the south of East Street. The total building area is 18530m2, and the total building height is 54.90m. The structure of the building is a frame shear wall structure, with two floors underground and fifteen floors above the ground. The second underground floor is a shelter for Class A and Class VI nuclear personnel, and the first underground floor is mainly used as garage, kitchen, staff canteen, pharmacy and equipment room

Boiler installation construction scheme of a steel plant

The boiler system of this project is a 260t/h, 9.8MPa, 540 ℃ gas boiler and its auxiliary equipment. The boiler is produced by Jiangxi Jianglian Energy and Environmental Protection Co., Ltd. It is a JG-260/9.8-Q type high temperature and high pressure natural circulation fully fired blast furnace gas boiler with rated evaporation capacity of 260t/h, rated steam pressure of 9.8MPa and rated steam temperature

Construction scheme for installation of electric basket

From the bottom floor of the building to the roof floor, there are no obstacles such as shelf pipes, protective nets, etc., which are set by the main structure construction unit at the outer protective nets of the first floor roof. The basket should be reserved. The protective nets from the second floor to the eleventh floor should be removed, so that the basket can run up and down unhindered. As the overall schedule of the construction unit requires that the external curtain wall construction below the 10th floor be carried out first

Enclosed bus installation construction scheme

This scheme belongs to the installation scheme of the enclosed bus of the electrical room and the power station of Beijing Rail Transit Network Management Service Center Phase I Project.

Construction scheme for installation of a water plant

According to the construction scheme of the installation part of a water plant, our company will bid for the construction content of the installation project according to the division of the bidding scope. The main contents include the installation, commissioning, operation inspection and completion acceptance of distribution well, pre sedimentation tank, sedimentation tank, V-shaped filter, blower room backwash pump room and its ancillary works.

Special construction scheme for lamp installation

The high pole lamp installation project of West Passenger Station is located next to the North Square of Nanchang West Railway Station and Zhanqian North Avenue. The light pole installation of the high pole lamp installation project of West Passenger Station mainly includes the hoisting of 30m high pole lamp pole and 10m double street lamp pole, the installation and commissioning of lamps, cable laying, etc.

Construction scheme for installation of a steel structure

A steel structure installation construction scheme A steel structure installation construction scheme A steel structure installation construction scheme

Special construction scheme for formwork installation

The special construction scheme for formwork installation is detailed and rich, with accurate and comprehensive design, which can be downloaded by netizens.

Method Statement for Derrick Installation and Demolition

Method Statement for Derrick Installation and Demolition Method Statement for Derrick Installation and Demolition

Equipment installation construction scheme of a water plant

This document is a construction plan for the installation of equipment in a water plant, including the catalog and detailed instructions. It is complete and has reference value, and can be downloaded for use.