Construction Scheme for Generator Set Installation

Installation construction scheme of a 600000 ton steam turbine generator set in Jilin

Jilin 600000 ton/year fuel ethanol self-contained power plant project has two double extraction condensing steam turbines, the model is B25-8.82/1.078, the rated inlet pressure is 8.82 MPa, and the rated inlet temperature is 535 ℃. The generator adopts brushless excitation generator, model is QF-25-2, rated power is 25MW, rated voltage is 10.5KV

Construction Scheme of New Generator Unit Installation Project in a Power Plant

According to the construction scheme for the installation of new generating units of a power plant, * * power plant is located on the opposite bank of Leishui River, about 3km south of * * City. It is a pithead power plant with the original design planning capacity of 1000MW. Two 200MW coal-fired generating units have been built in Phase I project, and dumper room, some coal conveying belt trestles and circulating water pump room have been expanded to meet the requirements of two 300MW

Construction Scheme for Installation of 25MW Steam Turbine Generator Unit in a Thermal Power Station in Hunan

This project is the installation project of 25MW steam turbine generator unit of thermal power station, and the absolute duration of this project is 65 days. Due to the tight construction period and high technical content, in order to ensure the quality and progress of the whole project, the construction must be carried out according to the drawings, installation instructions and other technical documents provided by the design institute and the manufacturer during the installation process. And strictly implement the Power Construction

Shandong Dezhou 30WM generator set and its auxiliary electrical equipment installation construction scheme

This project is the construction scheme (measures) for the installation of 30MW generator unit and auxiliary electrical equipment of the residual pressure utilization project of Shandong Hualu Hengsheng Co., Ltd., with detailed data for reference.

Construction scheme of diesel generator set installation project in a construction site in Nanjing

The hoisting commander instructs the crane driver to slowly and steadily lift the equipment 10 cm away from the truck, check the force on the wire rope and the load on the crane and floor, and continue hoisting after the "safety officer" confirms the safety

Construction Scheme for Generator Set Installation Project of Wanli Tire Co., Ltd. (Shantou Hongjun Electromechanical)

The generator set installation project of Wanli Tire Co., Ltd. is located in the factory of Wanli Tire Co., Ltd., No. 3, Wanli Road, Aotou Town, Conghua, Guangzhou, Guangdong Province,

Construction scheme for installation of vertical shaft Francis turbine generator unit of Guizhou Power Station

The hydropower station is located in the middle and lower reaches of Qingshui River in the upper reaches of the main stream of fertile water, and in Jinping County, Qiandongnan Miao and Tuan Autonomous Prefecture, Guizhou Province. It is 80km away from Jianhe County and 25km away from Jinping County. It is the second stage of 15 cascade hydropower stations with horizontal flow and the only leading hydropower station with multi-year regulation performance. The power station is | grade project

Construction scheme of diesel generator set

The construction scheme of diesel generator set includes that the current construction unit plans to set three new air-cooled diesel generator sets with a power of 2000KW in the project of Global Communication Building (new site), which can be used as standby power supply for fire fighting, in order to ensure the emergency power needs of the fire fighting system, emergency lighting and elevator system of the building even when the supply of municipal power is stopped

Method statement for start-up and commissioning of generator set

The second unit of the third phase expansion project of a second power plant is a QFS-135-2 unit produced by Shanghai Electric Machinery Works. The excitation mode is a separate excitation static semiconductor excitation system composed of a coaxial AC exciter and a permanent magnet sub exciter. The generator and transformer are connected to the system in the form of generator transformer unit. Through the generator transformer unit startup test, the primary equipment and relay of the main electrical system

Foundation construction scheme of a wind turbine

Formwork system: the foundation formwork adopts the set shaped steel formwork, the internal part is reinforced with split bolts, and the external part is protected with Ф 48 × 3.5 steel pipes and connected with the main bent as a whole.

Construction and commissioning scheme of generator set

This data is the construction and commissioning scheme of the generator set. The content is complete and available for reference. It is worth downloading by the designer

Construction Scheme for Generator Unit Commissioning of Guangzhou Mansion

A building is equipped with an 800KW diesel generator, which can automatically start in an emergency within 15 seconds for electrical and mechanical interlocking with the mains power to prevent parallel operation. It can be used as emergency power supply for fire fighting and standby power supply for important loads at ordinary times. This scheme is specially formulated for the trial operation of this generator set.

Installation scheme of 220KW diesel generator set

A 220KW Cummins diesel generator set is installed in the generator room of a community as an emergency power supply in case of mains power failure. When the mains power is cut off, the diesel generator set will be automatically started and automatically switched to the diesel generator feed circuit through the dual power automatic switching device in the distribution cabinet to supply power to the important loads in the museum area. The following describes how to install and debug the generator set. This data is 5 in total

Construction Scheme for Desulfurization Flue of a Power Plant Generator Unit in Zhejiang

Zheneng * * Power Plant Project has four 600MW coal-fired generating units, each of which is equipped with a desulfurization device. The desulfurized flue gas is introduced into the original flue gas from the horizontal flue part 41 at the chimney inlet, and the net flue gas after desulfurization returns to the horizontal flue from part 42, and then enters the chimney. Each unit desulfurization device has one bypass baffle and one original flue baffle

Construction Scheme of Unit Generator Phase I Project

The construction scale of a power plant is 4 × 600MW subcritical domestic coal-fired unit generator, and the first phase project is 2 × 600MW. Our company is responsible for the # 2 unit of Bid B. The engineering overview of electrical discipline is as follows:

Design and Construction Scheme of a Vanke Diesel Generator Set Installation Unified Technical Standard

In this project, there are two sets of electric starting batteries, one for standby and one for use. They should be as close to the unit as possible, and the voltage should be 24V. The capacity of each set should be determined according to the continuous starting of the diesel engine for no less than 6 times.

Startup and commissioning scheme of generator set

The second unit of the third phase expansion project of the second power plant is a QFS-135-2 type unit produced by Shanghai Electric Machinery Works. The excitation mode is a separate excitation static semiconductor excitation system composed of a coaxial AC exciter and a permanent magnet sub exciter. The generator and transformer are connected to the system in the form of generator transformer unit. Through the generator transformer unit startup test, the primary equipment, relay protection and automatic installation of the main electrical system

Installation and construction management report of water turbine generator unit

It mainly describes the main construction methods, quality assurance, safe and civilized construction and construction resource allocation of the installation project of water turbine generator units

Installation and construction organization design of heavy oil generator set for overseas projects

This document is the organization design for the installation and construction of heavy oil generator units in overseas projects, with 61 pages in total, which is detailed and can be used for reference.

Design and installation of 15D202-2 diesel generator set

The atlas is applicable to the design and installation of diesel generator set as normal power supply, emergency power supply and standby power supply in civil and general industrial buildings. The rated power of the generator is 230/400V or 6.3/10.5kV.

Diesel generator set design and installation manual

Data and information about Mitsubishi Heavy Industries diesel generator

Maintenance scheme and drawings of wind turbine generator set

The maintenance scheme and drawings of wind turbine generator units mainly involve United Power, ABB converter, Nangao gear box, yaw and maintenance.

Construction scheme of steam turbine generator unit of a chemical project

The steam turbine model of the project is C25-4.90/0.687 type 25MW extraction condensing steam turbine, and the rated speed is 3000r/min. The full text is 28 pages in total, more than 12000 words

00D202-2 Installation of emergency diesel generator set

00D202-2 Installation of emergency diesel generator set, detailed introduction to layout, installation and noise elimination of diesel generator set

Special construction scheme for temporary power generator

The section WA16~WA34 of Caonan Highway is the intercepting pipeline of Line A, which is designed to be jacked by the method of unslotted mud water balance; The total length of the pipeline is about 981m, including three 7000 * 3500, four Φ 4500 receiving wells and twelve Φ 1000 horse riding wells. The working shaft and receiving shaft shall be constructed in the reverse way, and the external side shall be constructed around D800@55

Special scheme for generator unit startup and commissioning

The second unit of the third phase expansion project of xx Second Power Plant is a QFS-135-2 type unit produced by Shanghai Electric Machinery Works. The excitation mode is a separate excitation static semiconductor excitation system composed of a coaxial AC exciter and a permanent magnet sub exciter. The generator and transformer are connected to the system in the form of generator transformer unit.

Construction Scheme of a 300MW Generator Unit New Project

The construction scheme of a new 300MW generating unit project. The new construction project of ×× Power Plant is one of the large-scale power generation projects planned during the "Tenth Five Year Plan" period of the country. It is mainly to alleviate the power shortage in the central and southern regions of ××, and thus meet the needs of power growth in ×× Province. It is a regional main power plant, which uses the five coal washing plants in ×× Mining Area of ×× Co., Ltd

Generator Set Commissioning Scheme_secret.doc

Technical specification for wind turbine foundation construction and unit installation

This document is the technical specification for the foundation construction and installation of wind turbine generator units, which is detailed and can be used for reference.

Construction Scheme for Phase I Project of Generator Set in a Power Plant

The construction scheme of the first phase project of a power plant's generator set, the construction scale of a power plant is 4 × 600MW subcritical domestic coal-fired generator set, and the first phase project is 2 × 600MW. Our company is responsible for the # 2 unit of Bid B.

Construction scheme for the use of generators in a simple garden in a community

It includes power supply mode, distribution line at construction site, distribution box and switch box at construction site, generator installation process flow, generator foundation, auxiliary agent transportation and hoisting in place, exhaust and subsequent cooling system installation, etc. The contents are detailed for reference.

Installation of 00D202-2 emergency diesel generator set

Installation of 00D202-2 emergency diesel generator set

Complete design scheme of diesel generator set

Only the ventilation, installation and installation scheme of the first floor of the basement of the generator set are involved, and the base involves electrical design, oil tank design

Construction Organization Scheme for Unit Generator Phase I Project

The construction scale of a power plant is 4 × 600MW subcritical domestic coal-fired unit generator, and the first phase project is 2 × 600MW. Our company is responsible for the # 2 unit of Bid B.

Construction record of steam turbine generator unit

This document is the construction record of steam turbine generator set, which includes unit project data record, steam turbine generator body installation record, gas turbine body installation record, etc. It is clear and easy to use, very complete, comprehensive, timely and convenient for reference, to help you solve urgent problems. Available for download.

Lightning protection scheme for control panel of generator set

The communication edge station and other equipment in the building and the computing center building must have complete and complete protective measures to ensure the normal operation of the system. This includes power supply system, signal transmission system, precision equipment, communication equipment and other devices should be protected by protective devices. 7 pages in total.

Installation scheme of steam turbine generator unit

Content introduction This plan details the whole process of the steam turbine generator unit from unpacking and counting, foundation setting out, polishing and trimming to the installation, inspection and acceptance of all components of the unit. It is a construction technical document integrating practicality, guidance, standardization and technology. A total of 21 pages.

2. Installation of diesel generator set GD2406043

Construction Scheme of Generator Foundation Slab in Shenhua Power Plant

The four columns in the middle of the base plate are connected by the plate wall, with the top elevation of the plate wall+0.000m and the bottom elevation of the base plate - 6.1m.