-
T beam prefabrication and installation construction scheme The starting and ending stake numbers of Zhangshi Huadong Section 24 of Lechang Guangzhou Expressway Project are K199+830 ～ K204+210, with a total length of 4.38 km. The standard of two-way six lane expressway is adopted, the design speed is 120km/h, and the width of integral subgrade is 34.5m, of which the width of carriageway is 2 × 3 × 3.75m, and the width of hard shoulder is 2 × 3m（ -
Analysis on construction scheme of I-beam This bridge is a bridge crossing Beifu River, a tributary of Minjiang River, with a width of 30 meters and a bank height of 7.4 meters. The water flow is large all the year round. The water supply is suspended for one month during the annual maintenance period from mid November to mid December. A total of 16 I-beams of this bridge -
Construction scheme of t-beam prefabrication for highway bridge engineering The superstructure of the south approach bridge of XX Highway Bridge is a post tensioned prestressed concrete T-beam with a total of 260 frames. The span is 29.94m, and the beam height is 1.8m. The load category is automobile - level 20, hanging - 120, crowd load 3.5kN/m3. -
() Construction scheme for T-beam installation of medium and small bridges) This scheme is applicable to municipal engineering, highway engineering medium and small bridges, crane installation of T-beam, simple construction, -
Construction scheme for tower crane foundation and installation Three tower cranes are selected for this project, which are respectively arranged at 0A ～ 0B/9 ～ 10 axis, E ～ (2/C)/01 ～ 1 axis and 14 outer/K ～ (2/H) axis (see Figure 1 Tower Crane Layout Plan for specific locations). Two tower cranes are under the foundation raft, one tower crane is outside the building, and the tower bodies of 1 # and 2 # tower cranes pass through the underground four floors to -
Selected construction scheme for water and electricity installation This is the necessary information for the personnel engaged in construction electromechanical engineering. It is very good, and it is very practical information for both project managers and constructors -
Tower crane foundation and installation construction scheme This scheme is the technical scheme and requirements for the foundation and installation construction of QTZ5013 tower crane. The tower height is 50 meters, the arm length is 50 meters, and the center of the tower crane is 4.0 meters away from the wall. Tower crane can be full at this position -
Method statement for installation and disassembly of hanging basket This scheme is based on JGJ202-2010 Basis for Preparation of Hanging Basket Scheme for Work at Heights, the current Technical Specification for Safety of Building Construction Tools or Scaffolds, construction drawings and other relevant documents, and is formulated after site investigation and research and analysis of standard level drawings. The hanging basket is installed to the 18th floor according to the actual situation of the site -
Construction scheme for water supply equipment installation Water supply equipment installation method statement Water supply equipment installation method statement Water supply equipment installation method statement -
Construction scheme for tower crane installation and removal This plan includes foundation construction, installation, wall attachment and removal of tower cranes. -
Special construction scheme for large glass installation Special construction scheme for large glass installation, project overview, general construction deployment, platform 2 steel pipe rack checking, safety and civilized construction measures -
Construction scheme for tower crane installation and removal Construction scheme for installation and removal of tower crane: the tower crane adopts C35 reinforced concrete foundation, and the foundation drawings are provided by the construction unit according to the requirements of the instructions. The installation of tower crane is allowed only when the concrete strength reaches 75% or more of the concrete strength before installation -
Rebar fabrication and installation method statement Reinforcement fabrication and installation construction scheme, project overview, construction preparation, operation process, quality standards, and problems to be noted -
Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city -
Method statement for installation and removal of passenger and freight elevators According to the needs of the site, the lift foundation adopts the scheme that the concrete foundation is basically equal to the installation ground, and the sill height between the ground and the cage is solved by filling up the external ground height. The foundation specification of SD200/200 construction elevator is 6000 × 4000 × 300 (thickness), and the concrete strength grade is C35; Double layer two-way Φ 12 @ 19 reinforcement -
Construction scheme for installation of light partition wall Appoint a comrade with strong sense of responsibility, high quality and rich practical experience as the special management director. The Project Department will implement unified management for the operation level according to the project management regulations, provide key guarantee and technical support in terms of human, financial and material resources -
Construction Scheme for Electrical Instrument Installation Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement -
Installation construction scheme of a seismic isolation device The key points of construction management are as follows, and the key points of installation and construction of isolation pads are as follows. (1) The embedded plate shall be set to ensure the horizontal accuracy of the embedded plate (installation accuracy: inclination angle below 1/500), and the embedded plate can be fixed with appropriate support. (2) The installation of isolation pad The suspension of isolation pad shall be carried out by means of 4-point suspension with wire rope to ensure the lifting operation -
Installation and disassembly construction scheme of a tower crane The tower cranes currently mobilized by the Project Department are angle steel QTZ40A (TC4807) hydraulic jack up tower cranes produced by Shandong Huaxia Group and designed in accordance with the national standard JG/T5037-1993 Classification of Tower Cranes. This machine is a multi-purpose tower crane with horizontal boom, trolley luffing and up slewing jack up. Nominal lifting torque 400KN M， -
Construction scheme for electrical installation of a plant The main structure of the project is a single storey steel structure workshop. This project is mainly responsible for the coordination and installation of the lighting system. Pipeline embedment works of weak current and fire fighting systems. -
GIS installation construction scheme of a power plant The content introduction includes: overview of GIS installation equipment, handling scheme and preparation before construction of GIS equipment, installation of GIS equipment, safety and civilized construction measures, torque of fastening bolts, technical disclosure records, etc. -
Boiler installation construction scheme of a project The boiler is a natural circulation water tube boiler with two horizontal drums. The fuel is sent into the furnace by the coal feeder and mixed with the air sent from the isobaric bellows for combustion. The flue gas generated by combustion flows upward into the horizontal cyclone separator, which is composed of three membrane water walls, ensuring the reliable operation of the separator. Data includes basic process standards for boiler installation, boiler -
Heating installation and transformation construction scheme Heating installation and transformation construction scheme -
Construction scheme for installation of air duct in shaft This document is the method statement for air duct hoisting in the pipe shaft of Vanke South Station Business City Phase I (Plot b-04) Integrated Electromechanical Engineering, Word version. Project overview: The construction area of the project is 141558.43m2, including 105988m2 of the above ground building area and 32287.3m2 of the underground building area,. Vanke South Station Business City I -
Construction scheme for installation of pump equipment Content introduction This document is the construction scheme for the installation of the machines and pumps in the acetylene plant of a project. There are 35 sets of organic pump equipment in this project, all of which are domestic machines and pumps. The scheme is designed and disclosed from the aspects of construction conditions, equipment installation measures, installation technical requirements, quality requirements, etc. -
Ventilation and air conditioning installation method statement Content Introduction This manuscript is a construction scheme for ventilation and air conditioning installation. Including: construction preparation, quality requirements, operation process, etc. -
Equipment installation construction scheme of a water plant This document is a construction plan for the installation of equipment in a water plant, including the catalog and detailed instructions. It is complete and has reference value, and can be downloaded for use. -
Installation construction scheme of a substation Installation construction scheme of a substation Installation construction scheme of a substation Installation construction scheme of a substation -
Mechanical and electrical installation construction scheme of a project Mechanical and electrical installation construction scheme of a project (water heating power) Mechanical and electrical installation construction scheme of a project (water heating power) -
Construction scheme for installation of a water plant According to the construction scheme of the installation part of a water plant, our company will bid for the construction content of the installation project according to the division of the bidding scope. The main contents include the installation, commissioning, operation inspection and completion acceptance of distribution well, pre sedimentation tank, sedimentation tank, V-shaped filter, blower room backwash pump room and its ancillary works. -
Video monitoring installation construction scheme This material is the video monitoring installation method statement, which is detailed and can be downloaded for reference. -
Glass installation construction scheme of a project Glass installation construction scheme of a project Glass installation construction scheme of a project Glass installation construction scheme of a project -
Installation construction scheme of a commercial and residential building Installation construction scheme of a commercial and residential building Installation construction scheme of a commercial and residential building Installation construction scheme of a commercial and residential building Installation construction scheme of a commercial and residential building -
Method statement for installation and disassembly of tower crane Method Statement for Installation and Dismantling of Tower Crane Method Statement for Installation and Dismantling of Tower Crane Method Statement for Installation and Dismantling of Tower Crane -
Construction scheme for installation and removal of hanging basket This data is: Construction Scheme for Installation and Demolition of Hanging Basket, which is detailed and can be used for reference. -
Construction Scheme for Steel Column Fabrication and Installation This document is the construction scheme for steel column fabrication and installation. The contents are detailed and can be used for reference. -
Construction scheme for installation of construction elevator This document is the construction scheme for the installation of construction elevators. The contents are detailed for reference. -
Special construction scheme for lamp installation The high pole lamp installation project of West Passenger Station is located next to the North Square of Nanchang West Railway Station and Zhanqian North Avenue. The light pole installation of the high pole lamp installation project of West Passenger Station mainly includes the hoisting of 30m high pole lamp pole and 10m double street lamp pole, the installation and commissioning of lamps, cable laying, etc. -
Elevator installation construction scheme (example) Project Name XXXXXXXX Garden Project Location: No. 108, XXXX Road, Bao'an District, Shenzhen Elevator User: Shenzhen XXXXX Co., Ltd. Builder: Shenzhen XXXXX Construction Engineering Co., Ltd. Supervisor: Shenzhen XXXXX Supervision Co., Ltd. Contract No.: DT2008030015 Elevator -
Water and electricity installation construction scheme of a middle school This information is a construction plan for the installation of water and electricity in a middle school. It is valuable and detailed for reference.
-
one Construction scheme of high-speed t-beam -
two Winter construction scheme of t beam yard -
three Concrete t beam construction scheme -
four Code for construction of t-beam of railway bridge -
five T beam installation safety construction scheme -
six Guizhou t beam installation construction scheme -
seven T beam prefabrication and installation method statement -
eight Precast t beam installation method statement