Coke oven installation construction scheme

Construction scheme for electrical installation of coke oven and coal tower

Construction scheme for electrical installation of coke oven and coal tower: the construction scheme for electrical installation of 2 # coke oven and coal tower in a 600000 t/a coking plant, construction assurance measures, relevant supporting facilities and necessary conditions are introduced

Construction Scheme of Masonry and Installation Technology for Large Coke Oven

As coke oven is a kind of thermal equipment for continuous production with long life, large volume and high cost, it is the most complicated kind of furnace in all kinds of furnaces. The quality requirements of coke oven engineering are very strict, the technical level of operation is high, and the measures are complex. It is difficult to control the engineering quality** 1. 2 # coke oven is a large volume coke oven. Large volume coke oven has low investment and production capacity

Construction scheme for electrical installation of coke oven in an iron and steel company

This information is a construction plan for coke oven electrical installation of an iron and steel company. The information is valuable and detailed for reference.

Construction scheme for electrical installation of coke oven in an iron and steel company

When the steel pipe is buried, it is not suitable to pass through the equipment foundation. When it passes through the building foundation, a protective pipe shall be added. 1.2.1.9 When the steel pipe is concealed, the outdoor buried depth shall not be less than 700mm, the indoor buried depth shall not be less than 300mm, and the buried depth shall not be less than 1000mm when crossing the road 1.2.1.10 The method of cold simmer is used for the simmer bending of steel pipes. Generally, large diameter steel pipes can be used

[Construction scheme for electrical installation of coke oven of an iron and steel company]

This project is the electrical lighting and electrical drive installation project for 7.63M coke oven body of Block B of * * * Company. The main work includes lighting in the body, transmission, distribution and control of public and auxiliary equipment of coke oven, installation of rigid sliding contact line of coal charging car and coke quenching car, and fabrication and installation of cable bracket of coke car.

Construction design scheme for electrical installation of coke oven in an iron and steel company

1.2.1.5 When the steel pipe is exposed to the ground, the height from the pipe orifice to the ground shall not be less than 200mm. 1.2.1.6 When outdoor steel pipes enter the equipment, pay attention to making waterproof bends to prevent rainwater from entering the equipment along the pipes. 1.2.1.7 The concealed piping shall be laid along the nearest route and the bending shall be minimized. The clear distance between the pipe buried in the wall or concrete and the surface shall not be less than 15mm

Construction Scheme for Coke Oven Electrical Installation of an Iron and Steel Company

This project is the electrical lighting and electrical drive installation project for 7.63M coke oven body of Block B of * * * Company. The main work includes lighting in the body, transmission, distribution and control of public and auxiliary equipment of coke oven, installation of rigid sliding contact line of coal charging car and coke quenching car, and fabrication and installation of cable bracket of coke car.

Construction Scheme for Electrical Installation of Coke Oven of an Iron and Steel Company. doc

Construction Scheme for Coke Oven Installation Project of Coking Gas Plant

For the coking gas plant project, the raw material is coal, and the product is coke and gas, which are flammable and explosive. Therefore, the technical requirements for installation are relatively strict, especially the requirements for welding quality, so as to prevent gas leakage due to slag inclusion and air hole oxidation after a period of time in the long-term production process, Personal injury and explosion accidents caused by mixing air into negative pressure pipeline

Detailed document of coke oven electrical installation construction scheme of a regional iron and steel company

This document is the detailed document of coke oven electrical installation construction scheme of a regional iron and steel company. The content of the document includes: project overview, project characteristics and other documents. The design is detailed for reference.

Construction Scheme for Electrical Installation of One Step B Coke Oven in Phase I of a Limited Liability Company, 29 pages in total

This project is the electrical lighting and electrical transmission installation project for 7.63M coke oven body of Block B of a company. The main work includes lighting in the body, transmission, distribution and control of public and auxiliary equipment of coke oven, installation of rigid sliding contact line of coal charging car and coke quenching car, and fabrication and installation of cable bracket of coke car.

Construction scheme for tower crane foundation and installation

Three tower cranes are selected for this project, which are respectively arranged at 0A ～ 0B/9 ～ 10 axis, E ～ (2/C)/01 ～ 1 axis and 14 outer/K ～ (2/H) axis (see Figure 1 Tower Crane Layout Plan for specific locations). Two tower cranes are under the foundation raft, one tower crane is outside the building, and the tower bodies of 1 # and 2 # tower cranes pass through the underground four floors to

Selected construction scheme for water and electricity installation

This is the necessary information for the personnel engaged in construction electromechanical engineering. It is very good, and it is very practical information for both project managers and constructors

Rebar fabrication and installation method statement

Reinforcement fabrication and installation construction scheme, project overview, construction preparation, operation process, quality standards, and problems to be noted

Installation construction scheme of a seismic isolation device

The key points of construction management are as follows, and the key points of installation and construction of isolation pads are as follows. (1) The embedded plate shall be set to ensure the horizontal accuracy of the embedded plate (installation accuracy: inclination angle below 1/500), and the embedded plate can be fixed with appropriate support. (2) The installation of isolation pad The suspension of isolation pad shall be carried out by means of 4-point suspension with wire rope to ensure the lifting operation

Installation and disassembly construction scheme of a tower crane

The tower cranes currently mobilized by the Project Department are angle steel QTZ40A (TC4807) hydraulic jack up tower cranes produced by Shandong Huaxia Group and designed in accordance with the national standard JG/T5037-1993 Classification of Tower Cranes. This machine is a multi-purpose tower crane with horizontal boom, trolley luffing and up slewing jack up. Nominal lifting torque 400KN M，

Installation construction scheme of a water plant in a city

Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city

Method statement for installation and removal of passenger and freight elevators

According to the needs of the site, the lift foundation adopts the scheme that the concrete foundation is basically equal to the installation ground, and the sill height between the ground and the cage is solved by filling up the external ground height. The foundation specification of SD200/200 construction elevator is 6000 × 4000 × 300 (thickness), and the concrete strength grade is C35; Double layer two-way Φ 12 @ 19 reinforcement

Construction scheme for installation of light partition wall

Appoint a comrade with strong sense of responsibility, high quality and rich practical experience as the special management director. The Project Department will implement unified management for the operation level according to the project management regulations, provide key guarantee and technical support in terms of human, financial and material resources

Construction Scheme for Electrical Instrument Installation

Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement

Construction scheme for tower crane installation and removal

This plan includes the foundation construction, installation, wall attachment and removal of tower cranes.

Construction scheme for water supply equipment installation

Water supply equipment installation method statement Water supply equipment installation method statement Water supply equipment installation method statement

Special construction scheme for large glass installation

Special construction scheme for large glass installation, project overview, general construction deployment, platform 2 steel pipe rack checking, safety and civilized construction measures

Construction scheme for tower crane installation and removal

Construction scheme for installation and removal of tower crane: the tower crane adopts C35 reinforced concrete foundation, and the foundation drawings are provided by the construction unit according to the requirements of the instructions. The installation of tower crane is allowed only when the concrete strength reaches 75% or more of the concrete strength before installation

Method statement for installation and disassembly of hanging basket

This scheme is based on JGJ202-2010 Basis for Preparation of Hanging Basket Scheme for Work at Heights, the current Technical Specification for Safety of Building Construction Tools or Scaffolds, construction drawings and other relevant documents, and is formulated after site investigation and research and analysis of standard level drawings. The hanging basket is installed to the 18th floor according to the actual situation of the site

Tower crane foundation and installation construction scheme

This scheme is the technical scheme and requirements for the foundation and installation construction of QTZ5013 tower crane. The tower height is 50 meters, the arm length is 50 meters, and the center of the tower crane is 4.0 meters away from the wall. Tower crane can be full at this position

Construction scheme for HVAC equipment installation

This project is Tongling non-ferrous copper smelting process technology transformation ("double flash" plant project) batching and transportation equipment and air duct installation project, designed by China Nerin Engineering Technology Co., Ltd., and the construction site is in the batching and transportation plant in the smelting area.

Special construction scheme for electromechanical installation

Part I: Electrical Installation I, Project Overview II, Construction Deployment III, Construction Preparation IV, Construction Methods and Technical Measures of Main Subdivisional Works V, Quality Assurance System and Measures Part II: Installation of W-type Flexible Anti seismic Cast Iron Drainage Pipe I, Process Features II, Scope of Application III, Process Principle IV, Construction Process Flow and Key Operating Points V, Materials

Metro electromechanical installation construction scheme

1.1.133 The sea rolling stock depot is located in Xikailang sea reclamation area of Pizhen City, covering a total area of 34.78 hectares

Construction scheme for electrical installation of a plant

The main structure of the project is a single storey steel structure workshop. This project is mainly responsible for the coordination and installation of the lighting system. Pipeline embedment works of weak current and fire fighting systems.

Construction Scheme for Cable Tray Installation

The material use plan shall be prepared according to the specifications and models required by the design, site investigation records and construction scheme, including the straight sections, bends, bridge accessories, supports and hangers of cable bridges of various specifications. Note that all materials required for cable tray installation shall be galvanized.

Water and electricity installation construction scheme of a hospital

This project is the outpatient and inpatient building of the affiliated hospital, which is located in the south of East Street. The total building area is 18530m2, and the total building height is 54.90m. The structure of the building is a frame shear wall structure, with two floors underground and fifteen floors above the ground. The second underground floor is a shelter for Class A and Class VI nuclear personnel, and the first underground floor is mainly used as garage, kitchen, staff canteen, pharmacy and equipment room

Method statement for installation of bulk boiler

The bulk boiler is assembled at the construction site of the construction unit. The boiler installation has a large amount of work, many types of work required, complex construction technology, high technical requirements, long construction period, and scattered operation sites. During construction, the construction method of pre combination and interleaving operation shall be adopted as far as possible to reduce aerial work, so as to speed up the installation progress and shorten the construction period; Arrange pulley block in concrete frame, and use winch

Boiler installation construction scheme of a steel plant

The boiler system of this project is a 260t/h, 9.8MPa, 540 ℃ gas boiler and its auxiliary equipment. The boiler is produced by Jiangxi Jianglian Energy and Environmental Protection Co., Ltd. It is a JG-260/9.8-Q type high temperature and high pressure natural circulation fully fired blast furnace gas boiler with rated evaporation capacity of 260t/h, rated steam pressure of 9.8MPa and rated steam temperature

Water and electricity installation construction scheme of a project

Water and electricity installation construction scheme of a project Water and electricity installation construction scheme of a project Water and electricity installation construction scheme of a project

Special construction scheme for formwork installation

The special construction scheme for formwork installation is detailed and rich, with accurate and comprehensive design, which can be downloaded by netizens.

Xxxx Building Installation Method Statement 1

This document is the construction plan 1 for the installation of xxxx building. It is detailed and can be used for reference, study and exchange.

Water and electricity installation construction scheme of a middle school

This information is a construction plan for the installation of water and electricity in a middle school. It is valuable and detailed for reference.

Construction scheme for installation of a steel structure

A steel structure installation construction scheme A steel structure installation construction scheme A steel structure installation construction scheme

Method Statement for Derrick Installation and Demolition

Method Statement for Derrick Installation and Demolition Method Statement for Derrick Installation and Demolition