-
Special construction scheme for lamp installation The high pole lamp installation project of West Passenger Station is located next to the North Square of Nanchang West Railway Station and Zhanqian North Avenue. The light pole installation of the high pole lamp installation project of West Passenger Station mainly includes the hoisting of 30m high pole lamp pole and 10m double street lamp pole, the installation and commissioning of lamps, cable laying, etc. -
Construction organization scheme for lamp installation Scheme name: The construction scheme of lamp installation mainly introduces the construction preparation, technical operation conditions, construction technology, etc. of the project. The contents and methods are illustrated with pictures and texts, which is worth referring to. The following are some of the contents. -
QTZ630 tower crane installation safety construction scheme of a project A project QTZ630 tower crane installation safety construction scheme A project QTZ630 tower crane installation safety construction scheme A project QTZ630 tower crane installation safety construction scheme A project QTZ630 tower crane installation safety construction scheme -
QTZ630 tower crane installation/safety construction scheme of a project The project has 16 floors above the ground and 1 floor underground. It is a frame shear wall structure with a total height of 55.2m. QTZ630 tower crane is used. -
Special construction scheme template for tower crane installation safety The project is located in, covering an area of square meters, with a total construction area of square meters, including square meters of ground construction area and square meters of underground construction area. Including commercial or residential buildings, townhouses, single villas, high-rise office complexes, commercial podiums, high-end hotels, commercial streets or supporting facilities. -
Safe construction scheme for installation of residential building project 1. Safety production responsibility (1) Take full leadership responsibility for safe and civilized production in the whole process of construction, production and operation of the project. (2) Implement the national safety production guidelines, policies, laws and regulations, and various rules and regulations, formulate targeted safety production management methods and implementation rules in combination with the characteristics of the project and construction nature, and preside over and supervise their implementation. -
Method statement for installation of lighting fixtures Send you an engineering data. It will be of great help to engineers and technicians. -
Construction scheme for installation of switch socket and common lamps The construction scheme for the installation of switch socket and common lamps includes a modern comprehensive building. The total land area is 16640m2, the building area is 121547m2 (including 29419m2 underground and 92137m2 above the ground), three floors underground and 38 floors above the ground, and the total height of the building is 165.2m -
Special construction scheme for safety of steel box girder installation This document is a special construction scheme for safety of steel box girder installation. The contents are detailed for reference. -
[Sichuan] Safe Construction Scheme for Installation of Residential Buildings The assessment of the project is carried out in two ways: office data and spot check. The office data mainly check whether the project is established and sorted according to regulations, whether the necessary data and various systems are stored according to regulations, and combine the actual situation of the unit to establish the safety responsibility system at all levels and decompose the safety responsibility objectives. -
Special construction scheme for installation safety of a steel box girder The Wuhan Jingmen section of Shanghai Chengdu Expressway is Shanghai Chengdu in the National Expressway Network Planning. 1.2 Introduction to steel box girder project 1.2.1. ZK2+319.579 East West Lake Hub Interchange Z Line Bridge is an overpass bridge connecting Wuhan Outer Ring Road and crossing the main line of Beijing Zhuhai Expressway on Wujing Jingzhou Expressway. The main beam is a three span continuous steel box girder with a span of 40+60 -
Special construction scheme for installation, disassembly and use safety of tower groups This project is a local building in Plot C and Plot D, mainly consisting of four 3-storey frame structure pilot plants, with building height of H=17.8m, one 3-storey frame structure comprehensive animal test building, with building height of H=19.80m, one 5-storey frame structure antibody production building, with building height of H=24.3m, one 2-storey frame corridor, one 1-storey power station -
Organization and construction scheme of lamp installation works When steel pipe is used as the suspender of lamps in this project, the inner diameter of the steel pipe is generally not less than 10mm, and the wall thickness is not less than 15mm. The hanging chain of chain hanging lamps should use flange, galvanized iron chain or load-bearing wire and other supporting products. The lamps of chain hanging lamps should not be subject to tension, and the lamp wires must be spliced together with the hanging chain. -
Special construction scheme for safety of mixing plant installation and removal This document is a special construction plan for the installation and removal of the mixing plant. The document includes: the project sets up a JS1500B cement concrete mixing plant under the bridge that meets the standardization requirements and production needs. The concrete under the bridge used for the construction of the project is mixed and distributed centrally to ensure the quality of cement concrete. Common Bridge of Contract Section 5 of Hangzhou Bay Bridge North Link (Phase II) Project -
Special construction scheme for safety of construction elevator installation (template) Special construction scheme for safety of construction elevator installation (template). doc Special construction scheme for safety of construction elevator installation (template). doc -
Special construction scheme for safety of construction elevator installation (key points) Special construction scheme for safety of construction elevator installation (key points). doc Special construction scheme for safety of construction elevator installation (key points). doc -
Method statement for installation and disassembly of hanging basket This scheme is based on JGJ202-2010 Basis for Preparation of Hanging Basket Scheme for Work at Heights, the current Technical Specification for Safety of Building Construction Tools or Scaffolds, construction drawings and other relevant documents, and is formulated after site investigation and research and analysis of standard level drawings. The hanging basket is installed to the 18th floor according to the actual situation of the site -
Tower crane foundation and installation construction scheme This scheme is the technical scheme and requirements for the foundation and installation construction of QTZ5013 tower crane. The tower height is 50 meters, the arm length is 50 meters, and the center of the tower crane is 4.0 meters away from the wall. Tower crane can be full at this position -
Construction scheme for installation of light partition wall Appoint a comrade with strong sense of responsibility, high quality and rich practical experience as the special management director. The Project Department will implement unified management for the operation level according to the project management regulations, provide key guarantee and technical support in terms of human, financial and material resources -
Construction scheme for tower crane foundation and installation Three tower cranes are selected for this project, which are respectively arranged at 0A ～ 0B/9 ～ 10 axis, E ～ (2/C)/01 ～ 1 axis and 14 outer/K ～ (2/H) axis (see Figure 1 Tower Crane Layout Plan for specific locations). Two tower cranes are under the foundation raft, one tower crane is outside the building, and the tower bodies of 1 # and 2 # tower cranes pass through the underground four floors to -
Installation construction scheme of a seismic isolation device The key points of construction management are as follows, and the key points of installation and construction of isolation pads are as follows. (1) The embedded plate shall be set to ensure the horizontal accuracy of the embedded plate (installation accuracy: inclination angle below 1/500), and the embedded plate can be fixed with appropriate support. (2) The installation of isolation pad The suspension of isolation pad shall be carried out by means of 4-point suspension with wire rope to ensure the lifting operation -
Installation and disassembly construction scheme of a tower crane The tower cranes currently mobilized by the Project Department are angle steel QTZ40A (TC4807) hydraulic jack up tower cranes produced by Shandong Huaxia Group and designed in accordance with the national standard JG/T5037-1993 Classification of Tower Cranes. This machine is a multi-purpose tower crane with horizontal boom, trolley luffing and up slewing jack up. Nominal lifting torque 400KN M， -
Selected construction scheme for water and electricity installation This is the necessary information for the personnel engaged in construction electromechanical engineering. It is very good, and it is very practical information for both project managers and constructors -
Special construction scheme for large glass installation Special construction scheme for large glass installation, project overview, general construction deployment, platform 2 steel pipe rack checking, safety and civilized construction measures -
Special safety construction scheme for high formwork erection Special scheme for formwork erection of transfer floor height of a well-known building in Beihai, including CAD drawings, calculation sheets and expert argumentation data -
Construction scheme for tower crane installation and removal Construction scheme for installation and removal of tower crane: the tower crane adopts C35 reinforced concrete foundation, and the foundation drawings are provided by the construction unit according to the requirements of the instructions. The installation of tower crane is allowed only when the concrete strength reaches 75% or more of the concrete strength before installation -
Special construction scheme for road safety Special construction scheme for road safety: the whole line is designed according to the standard of Class III highway and taking into account the functions of urban roads. The subgrade width is 12 meters, including 7.5 meters wide carriageway, two-way two lanes, 1.5 meters wide hard shoulders on both sides (with the function of temporary driving and emergency parking strips), 0.75 meters wide earth shoulders on both sides, and the design driving speed is 30 km/h. Asphalt is used for the pavement of the whole line -
Special construction scheme for formwork safety The formwork design of plate wood support shall be carried out according to the requirements of fair faced concrete. On the premise that the formwork meets the requirements of strength, rigidity and stability, the surface finish shall be improved as far as possible, and the internal and external corner formwork shall be unified and neat. -
Rebar fabrication and installation method statement Reinforcement fabrication and installation construction scheme, project overview, construction preparation, operation process, quality standards, and problems to be noted -
Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city Installation construction scheme of a water plant in a city -
Method statement for installation and removal of passenger and freight elevators According to the needs of the site, the lift foundation adopts the scheme that the concrete foundation is basically equal to the installation ground, and the sill height between the ground and the cage is solved by filling up the external ground height. The foundation specification of SD200/200 construction elevator is 6000 × 4000 × 300 (thickness), and the concrete strength grade is C35; Double layer two-way Φ 12 @ 19 reinforcement -
Construction Scheme for Electrical Instrument Installation Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement Electrical Instrument Installation Method Statement -
Construction scheme for tower crane installation and removal This plan includes the foundation construction, installation, wall attachment and removal of tower cranes.
-
one Indoor lamp installation scheme -
two Installation scheme of common lamps -
three Installation scheme of suspender lamp -
four Outdoor lamp installation scheme -
five Lamp installation and commissioning scheme -
six Installation scheme of factory lamps -
seven Method statement for lamp installation -
eight Construction Scheme for Installation of Plant Lamps