Fire protection design of 30 m3 methanol storage tank

Fire protection design calculation of combustible liquid storage tank

Fixed fire cooling water system and fixed low expansion foam fire extinguishing system are set in the flammable liquid storage tank area. Through the piping and valve setting of the fire extinguishing system, a more reasonable and economical fire extinguishing system design is obtained by comparison.

Fire protection design calculation of liquefied hydrocarbon storage tank

This paper introduces the properties of liquefied hydrocarbon and the characteristics of fire, analyzes on the fire danger of liquefied hydrocarbon storage tank and the cooling effect of fire fighting cooling water, lists the calculation examples of the design of water spray system for liquefied hydrocarbon spherical tank, and puts forward some problems needing attention in the design.

Fire protection design of 8 oil depots with 100000 m3 large oil storage tanks

With the rapid development of petrochemical industry, more and more petrochemical plant engineering design challenges the current design mode. Fire protection design is a necessary measure to ensure production safety, so it puts forward higher requirements for fire protection design.

Construction Organization Design of the Project with an Annual Output of 300000 Tons of Methanol and Synthetic Ammonia in Guizhou

The construction organization design is mainly prepared based on the design drawings of the construction project of the synthetic ammonia and methanol units of the first phase project of * * Coal Chemical Industry, the site conditions learned through investigation, the relevant intentions and requirements of the owner and the design unit, the current building construction specifications, construction manuals, the experience of similar projects constructed by the enterprise, and the technical and economic conditions of the enterprise.

Case analysis of plant fire protection design

Designed according to foreign fire protection standards, exchange of domestic fire protection regulations with foreign standards

Fire Protection Design Manual 2007.08.27

All kinds of design data of a complete set of automatic fire alarm and control products consisting of various fire alarm controllers, manual control panels, gas fire extinguishing panels, floor displays, smoke and temperature detectors, input and output modules, manual fire alarm buttons, fire hydrant buttons, short circuit isolators, repeaters, etc.

Application requirements for fire protection design documents

Details of application requirements for fire protection design documents

Construction organization design of a fire station

This document is the construction organization design of a fire station, and its contents are only for reference. Thank you for your participation

Fire protection design of small space duplex building

The building with small space and jump floor refers to the building with "space use function" of adjacent floors combined. Usually, the adjacent floor space is connected in one floor through indoor stairs or escalators.

Analysis on 100 Cases of Fire Protection Design Defects

In the design of bus linkage system, the fire control room did not consider the manual direct control of main fire extinguishing equipment. For example, CO2 gas fire extinguishing system.

Discussion on fire protection design of clean workshop

The clean workshop is a special kind of production workshop. In addition to meeting the basic requirements of the specification, its fire protection design should also be based on local conditions and realistic design. In addition, when meeting the requirements of building fire protection facilities, it is recommended to provide fire extinguishing facilities for some key production equipment, equipment using flammable and explosive liquids or equipment with expensive value

Electrical description of building fire protection design

The structural form is frame structure; The seismic fortification category of the building is Class C, the safety level of the building structure is Class II, and the seismic fortification intensity is 7 degrees. Design basic seismic acceleration 0.10g, design seismic grouping: Group I; Site category: Class III; The characteristic period Tg=0.45sec Each floor of the business hall is a fire compartment with an area of ≤ 2500 ㎡.

Some Suggestions on Fire Protection Design

A point of view in 10.2.2 of Code for Fire Protection Design GB5116-98

Fire protection design of a factory in Guangdong

Special section on fire protection design of a factory in Guangdong: the planned total land area of the factory is 22074.510m2, and the total building area is 32284.17m2.

Construction design of fire protection organization for a project

This project is Dongguancheng fire protection project, located in Dazu District, Chongqing. The construction area of the project is 75918.8 square meters, and the base area is 12474 square meters; The ground is composed of 4 buildings. Among them, Building 1 has 31 floors in total, with 1~3 floors for commercial use and 4 floors and above for residential use. The total height of the building is 96.8m.

Fire protection design of high-rise office and hotel

Architectural design layout, transformed into hotel office building design, transformed into dormitory in a certain area, including architectural design drawings from the ground floor to the top floor

Fire fighting design documents for decoration of a hotel

The latest 2015 specification shall be adopted as the fire protection design document for the secondary decoration of the hotel. The construction drawing of the original XX Software Building # 3 has determined the indoor decoration materials (each part) and passed the fire protection review; This design is due to the change of the use function of Building 3 # of XX Software Building from the original staff dormitory to XX Hotel (XX Donghai Store). This drawing is based on the architectural engineering

Fire protection construction organization design of a project

According to the specific situation of the fire protection system of the office building, the following overall construction scheme is proposed: in order to ensure the construction quality, the construction must be carried out in strict accordance with the specifications. Considering the construction period of this project, the personnel allocation is basically fixed. The following construction precautions and requirements must be strictly followed for safe construction.

Fire protection design+construction guidance+acceptance

Fire protection design+construction guidance+acceptance (urban fire station building standard+code for design, installation and acceptance of independent smoke detection and alarm device DB-50-288-2008+[Guangdong] DBJT15-77-2010 code for design, construction and acceptance of electrical fire monitoring system+14X505-1 diagram of automatic fire alarm system design code

Construction organization design of a fire station

The contracting mode of this project is to contract labor, materials, quality, progress, safety and civilized construction.

Application Form for Filing of a Fire Protection Design

This document is an application form for the filing of a fire protection design. The contents are complete and can be downloaded

Special Section on Fire Protection and Safety Design.pdf

Fire protection construction organization design (1). pdf

Construction organization design of a project with an annual output of 300000 tons of methanol and synthetic ammonia in Guizhou

**The synthetic ammonia and methanol unit of Coal Chemical Industry Phase I Project is a methanol unit with an annual output of 300000 tons and a synthetic ammonia unit with an annual output of 300000 tons, including supporting utilities, auxiliary facilities and other projects. The main construction contents include methanol unit, synthetic ammonia unit and supporting utilities, auxiliary facilities and other projects with the above units.

Steel structure construction design scheme of a 300000 ton/year methanol project in Shanxi

The main work contents of civil engineering include equipment foundation, single-layer industrial plant, concrete frame, etc. The main job numbers include coke oven gas compression, crude gas compression, synthetic compression, coke oven gas desulfurization, conversion, decarbonization, purified gas desulfurization, methanol synthesis, etc.

Construction organization design of a project with an annual output of 300000 tons of methanol and synthetic ammonia in Guizhou

The construction organization design is mainly prepared based on the design drawings of the construction project of the synthetic ammonia and methanol units of the first phase project of * * Coal Chemical Industry, the site conditions learned through investigation, the relevant intentions and requirements of the owner and the design unit, the current building construction specifications, construction manuals, the experience of similar projects constructed by the enterprise, and the technical and economic conditions of the enterprise.

Fire protection design of high-rise complex building

Through the concrete example of hotel design, this paper summarizes the design essentials of hotel fire automatic alarm system in high-rise buildings, the selection of regional alarm controller, the division of detection areas and the location of fire detectors. Fire fighting linkage equipment and its control. The project has large capacity and complex system. In addition to the above ground shopping malls and high-end hotels, the first and second floors of the underground are equipped with centralized ventilation and air conditioning systems

Some views on fire protection design of a comprehensive building

Based on the analysis of the design of a complex building, it is concluded that the sprinkler system and the indoor hydrant system should be set separately. The valves of the sprinkler system, the end water testing device and the pump adapter shall be set reasonably.

Discussion on electrical design of building fire protection

In high-rise and more complex multi-storey civil buildings, a perfect fire electrical design system is very important for the timely and reliable operation of various fire electrical equipment in the building, effective evacuation of personnel, materials and control of fire spread after a fire. Here are some personal experiences.

Discussion on air volume design of fire smoke exhaust

Discussion on air volume design of fire smoke exhaust, mainly describing the fire exhaust design of ordinary air conditioning system and purification air conditioning system

Problems easy to exist in fire protection design

This paper mainly discusses the problems that are easy to occur in fire protection design.

Code for Residential Buildings and Residential Fire Protection Design

By comparing the difference between the "Code for Residential Buildings" and the relevant provisions of the current national technical standards for fire protection, this paper puts forward the viewpoint of residential fire protection design.

Design of fire protection electrical system for high-rise buildings

Let's have a look! Let's encourage each other!

Fire protection construction organization design scheme

Technical preparation.

Design of fire linkage control system

When designing the automatic fire alarm and fire linkage control system, first define the building characteristics and functional characteristics of the building itself, understand the facilities of other disciplines in the fire protection engineering design of the building, especially the design requirements of the equipment (ventilation, water) discipline for the electrical discipline, and then determine the overall structure of the system according to the relevant specifications. According to High rise Civil Building Design

Design of fire linkage alarm system based on lonworks

The fire alarm monitoring system is one of the important standards to measure the degree of building intelligence. However, most of the existing buildings have made the fire monitoring system of each building an independent individual due to historical reasons. Therefore, each building needs to assign special personnel to be on duty 24 hours a day, which not only wastes human and material resources, but also limits the management level of fire information. With the network

Discussion on the design of building electrical fire protection

The building electrical fire protection design mainly includes three aspects, namely, automatic fire alarm, fire linkage control and fire equipment distribution. Here, I would like to talk about my understanding and experience of fire electrical design in order to discuss with my peers

Fire protection construction organization design of an office building

This project belongs to the installation project of large-scale modern fire fighting facilities and Class I high-rise and Class I protection objects. Because the stability and reliability of the alarm system in the fire fighting project are very important for the impact of the project and the use of the owner, our company selects Ningbo Wanlida or Shenyang Meibao alarm products with strong reliability and stability to realize the alarm and linkage control functions of the building.

Fire fighting construction organization design of a hotel in Shandong

A hotel in Linyi is located at the northwest corner of the intersection of Binhe Avenue and Lanting Lane, Chengbei New District, Linyi City. The total construction land area is 12 mu, and the terrain is relatively flat. The land is long trapezoid from east to west, with Lanting Lane in the south and government reserve land in the north. The project has riverside landscape resources, and the plot design is positioned at a new five-star hotel and a water meeting, catering, leisure and conference center.