-
Electrical description of building fire protection design The structural form is frame structure; The seismic fortification category of the building is Class C, the safety level of the building structure is Class II, and the seismic fortification intensity is 7 degrees. Design basic seismic acceleration 0.10g, design seismic grouping: Group I; Site category: Class III; The characteristic period Tg=0.45sec Each floor of the business hall is a fire compartment with an area of ≤ 2500 ㎡. -
Construction organization design of a fire station This document is the construction organization design of a fire station, and its contents are only for reference. Thank you for your participation -
Fire protection design of small space duplex building The building with small space and jump floor refers to the building with "space use function" of adjacent floors combined. Usually, the adjacent floor space is connected in one floor through indoor stairs or escalators. -
Analysis on 100 Cases of Fire Protection Design Defects In the design of bus linkage system, the fire control room did not consider the manual direct control of main fire extinguishing equipment. For example, CO2 gas fire extinguishing system. -
Fire protection construction organization design of a project According to the specific situation of the fire protection system of the office building, the following overall construction scheme is proposed: in order to ensure the construction quality, the construction must be carried out in strict accordance with the specifications. Considering the construction period of this project, the personnel allocation is basically fixed. The following construction precautions and requirements must be strictly followed for safe construction. -
Case analysis of plant fire protection design Designed according to foreign fire protection standards, exchange of domestic fire protection regulations with foreign standards -
Fire Protection Design Manual 2007.08.27 All kinds of design data of a complete set of automatic fire alarm and control products consisting of various fire alarm controllers, manual control panels, gas fire extinguishing panels, floor displays, smoke and temperature detectors, input and output modules, manual fire alarm buttons, fire hydrant buttons, short circuit isolators, repeaters, etc. -
Discussion on fire protection design of clean workshop The clean workshop is a special kind of production workshop. In addition to meeting the basic requirements of the specification, the fire protection design of the clean workshop should also be based on local conditions and be realistic. In addition, when meeting the requirements of building fire protection facilities, it is recommended to provide fire extinguishing facilities for some key production equipment, equipment using flammable and explosive liquids or equipment with expensive value -
Application requirements for fire protection design documents Details of application requirements for fire protection design documents -
Some Suggestions on Fire Protection Design A point of view in 10.2.2 of Code for Fire Protection Design GB5116-98 -
Fire protection design of a factory in Guangdong Special section on fire protection design of a factory in Guangdong: the planned total land area of the factory is 22074.510m2, and the total building area is 32284.17m2. -
Construction design of fire protection organization for a project This project is Dongguancheng fire protection project, located in Dazu District, Chongqing. The construction area of the project is 75918.8 square meters, and the base area is 12474 square meters; The ground is composed of 4 buildings. Among them, Building 1 has 31 floors in total, with 1~3 floors for commercial use and 4 floors and above for residential use. The total height of the building is 96.8m. -
Fire protection design of high-rise office and hotel Architectural design layout, transformed into hotel office building design, transformed into dormitory in a certain area, including architectural design drawings from the ground floor to the top floor -
Fire fighting design documents for decoration of a hotel The latest 2015 specification shall be adopted as the fire protection design document for the secondary decoration of the hotel. The construction drawing of the original XX Software Building # 3 has determined the indoor decoration materials (all parts) and passed the fire protection review; This design is due to the change of the use function of Building 3 # of XX Software Building from the original staff dormitory to XX Hotel (XX Donghai Store). This drawing is based on the architectural engineering -
Fire protection design+construction guidance+acceptance Fire protection design+construction guidance+acceptance (urban fire station building standard+code for design, installation and acceptance of independent smoke detection and alarm device DB-50-288-2008+[Guangdong] DBJT15-77-2010 code for design, construction and acceptance of electrical fire monitoring system+14X505-1 diagram of automatic fire alarm system design code -
Construction organization design of a fire station The contracting mode of this project is to contract labor, materials, quality, progress, safety and civilized construction. -
Application Form for Filing of a Fire Protection Design This document is an application form for the filing of a fire protection design. The contents are complete and can be downloaded -
Design of fire linkage control system When designing the automatic fire alarm and fire linkage control system, first define the building characteristics and functional characteristics of the building itself, understand the facilities of other disciplines in the fire protection engineering design of the building, especially the design requirements of the equipment (ventilation, water) discipline for the electrical discipline, and then determine the overall structure of the system according to the relevant specifications. According to High rise Civil Building Design -
Some views on fire protection design of a comprehensive building Based on the analysis of the design of a complex building, it is concluded that the sprinkler system and the indoor hydrant system should be set separately. The valves of the sprinkler system, the end water testing device and the pump adapter shall be set reasonably. -
Discussion on electrical design of building fire protection In high-rise and more complex multi-storey civil buildings, a perfect fire electrical design system is very important for the timely and reliable operation of various fire electrical equipment in the building, effective evacuation of personnel, materials and control of fire spread after a fire. Here are some personal experiences. -
Discussion on air volume design of fire smoke exhaust Discussion on air volume design of fire smoke exhaust, mainly describing the fire exhaust design of ordinary air conditioning system and purification air conditioning system -
Problems easy to exist in fire protection design This paper mainly discusses the problems that are easy to occur in fire protection design. -
Fire protection design of high-rise complex building Through the concrete example of hotel design, this paper summarizes the design essentials of hotel fire automatic alarm system in high-rise buildings, the selection of regional alarm controller, the division of detection areas and the location of fire detectors. Fire fighting linkage equipment and its control. The project has large capacity and complex system. In addition to the above ground shopping malls and high-end hotels, the first and second floors of the underground are equipped with centralized ventilation and air conditioning systems -
Water supply, drainage and fire protection design of Weilisi Mansion Located in Hohhot, Inner Mongolia, Weilisi Building is a comprehensive high-rise building integrating office and hotel, with a total height of 62.6 meters. The underground floor of the building is the power distribution room, water pump room, equipment room, etc., and the indoor ground elevation is -4.35m; There are 17 floors above the ground, and the first floor is the reception hall, with the floor height of 5.4m; The second floor is a coffee shop, restaurant and warehouse, -
Design of fire linkage alarm system based on lonworks The fire alarm monitoring system is one of the important standards to measure the degree of building intelligence. However, most of the existing buildings have made the fire monitoring system of each building an independent individual due to historical reasons. Therefore, each building needs to assign special personnel to be on duty 24 hours a day, which not only wastes human and material resources, but also limits the management level of fire information. With the network -
Code for Residential Buildings and Residential Fire Protection Design By comparing the difference between the "Code for Residential Buildings" and the relevant provisions of the current national technical standards for fire protection, this paper puts forward the viewpoint of residential fire protection design. -
Fire fighting design for water supply and drainage of a three story workshop I am Xiaobai. I am not proficient in the design of drawings. I forget your criticism and advice. I would appreciate it if you could point out my shortcomings -
Fire protection construction organization design of the Chamber of Commerce Building The fire protection project of the Chamber of Commerce Building is located beside the best bridge of Nanlei South Road, developed and constructed by Tongji Engineering Construction Management Co., Ltd. and constructed by Construction Group Co., Ltd. The project covers a total area of 13048 ㎡, with a total construction area of about 59473 ㎡. The building is 184m long from south to north, 65m wide from south to north, 38m wide from north. It is a frame tube structure with one underground floor and two 23 storey main buildings from north to south above the ground -
Fire protection design of a high-rise office building The project is a high-rise office building with 21 floors above the ground and 1 floor underground, with a total building area of 22521m2 -
01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) 01s201 (fire hydrant) -
Construction organization design of a school fire protection reconstruction Be responsible for handling the approval procedures of local fire control and other relevant departments of the project, material and equipment supply, pipeline laying, threading, system installation, commissioning, testing, completion acceptance, acceptance by local relevant departments (fire control, etc.), sorting and archiving of completion data, use and warranty services. -
Fire fighting construction organization design of a hospital in Henan On the basis of carefully reading the construction drawings of the construction design and combining with the site, our company has fully studied and demonstrated the preparation principles, contents and measures of the construction organization design. The purpose of this construction organization design is to provide a complete programmatic technical document for the construction organization of the fire protection engineering project of the advanced ward building project of a provincial hospital of traditional Chinese medicine to guide the construction and management of the installation project -
Construction organization design of an oilfield fire station The project is a brick concrete structure with partial frame structure. The safety level of the building structure is Level II, the design service life of the structure is 50 years, the design level of the foundation is Level C, and the quality control level of the masonry construction is Level B. The seismic fortification intensity is 7 degrees. The design earthquake basic acceleration value is 0.15g, the design earthquake group is the first group, the building seismic fortification category is C, and the structural seismic fortification category is III -
Discussion on Fire Fighting Design of Theater Engineering Discussion on fire fighting design of theater project, including western fire water supply systems such as rain shower and water curtain, for reference -
Fire fighting construction organization design of education base 1. Basic information of the project 1.1 Project name: fire protection construction project of traditional education base 1.2 Project address: 1.3 Building area: 1.4 Design unit: Design and Research Institute (Group) Co., Ltd. 1.5 Quality requirements: ensure that the main works can pass the inspection and acceptance of the fire department and reach the provincial level of excellence or above. 1.6 Construction period requirements: 60 calendar days -
Code for acceptance and design of hotel fire protection ）The wiring of the automatic fire alarm system project shall comply with the provisions of the current national standard Code for Construction and Acceptance of 1KV and Below Electrical Installations Wiring Engineering GB50258-96. (2) The core section of the transmission line of the automatic fire alarm system shall not only meet the technical conditions, but also meet the mechanical strength requirements. Minimum copper core insulated conductor laid through pipes -
Fire protection construction organization design The fire protection construction organization design is rich and detailed, and can be downloaded for reference and study by netizens.
-
one Fire hydrant cabinet design requirements -
two Design scheme of fire hydrant cabinet -
three Code for design of fire hydrant cabinet -
four Design of cabinet in front of fire hydrant -
five Design of fire hydrant beside household door -
six Design of fire hydrant beside entrance door -
seven Design of fire hydrant cabinet at elevator entrance -
eight Cabinet design of fire hydrant elevator