-
Installation and construction design of indoor fire pipeline and equipment The pipes of the fire hydrant system shall be selected according to the design requirements. Generally, carbon steel pipes or seamless steel pipes shall be used. The pipes shall not be bent, rusted, double skinned or uneven. 1.1.2 The specifications and models of gate valve, butterfly valve, check valve, fire hydrant box, fire hydrant, water pump adapter and other main components in the fire hydrant system shall meet the design requirements, with complete accessories and casting -
Indoor fire pipeline and equipment installation This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. -
Indoor fire pipeline and installation scheme The specification and type of fire hydrant box shall meet the design requirements, and the box surface shall be flat and smooth. The metal box shall be free of rust and scratch, and the door shall be opened flexibly. The box is square and complete with accessories. The plug valve is regular in appearance, free of cracks, flexible in opening and closing, tight in closing, intact in sealing filler, and provided with factory certificate. -
Installation of indoor fire pipeline equipment 2.1.1 The fire sprinkler pipes shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and burr. The parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. -
Indoor fire pipeline and equipment installation Indoor fire protection pipeline and equipment installation documents -
Indoor fire pipeline and equipment installation organization design scheme This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. -
Demolition of indoor fire pipeline, wiring and fire equipment Inspection of construction process removal site and hanging of warning signs → erection of scaffold that has passed the inspection → hanging of the removed pipeline of hoist that has passed the inspection → staff hanging the safety belt → starting to cut the pipeline → pulling the hoist to slowly put down the cut pipeline → transportation to 0 meters by elevator → transportation to the designated location by pallet truck. -
Indoor fire pipeline and equipment installation scheme The specification, type and operating temperature of the sprinkler head shall meet the design requirements, with regular appearance, complete screw threads, no broken and loose temperature sensing package, and no falling and loose fusible chips. The factory certificate is available. -
Standard for installation of indoor fire pipeline and equipment 1.1 Material requirements: 1.1.1 The pipes for the fire hydrant system shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and burr. The parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. 1.1.2 Alarm valve, action valve, control valve, retarder and water flow indicator of fire sprinkler system -
Installation of common indoor fire pipeline and equipment This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings -
Organization design scheme for installation of indoor fire protection pipeline and equipment in a residential area in Wuhan Fire sprinkler pipes shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust, burrs, parts without bias, square thread, incomplete thread, inaccurate angle, etc -
Construction organization design of indoor fire pipeline and equipment installation process The specification and type of fire hydrant box shall meet the design requirements, and the box surface shall be flat and smooth. The metal box shall be free of rust and scratch, and the door shall be opened flexibly. The box is square and complete with accessories. The plug valve is regular in appearance, free of cracks, flexible in opening and closing, tight in closing, intact in sealing filler, and provided with factory certificate. -
Detailed construction organization design of indoor fire pipeline and equipment installation process The specifications and models of the alarm valve, action valve, control valve, retarder, water flow indicator, water pump adapter and other main components of the fire sprinkler system of the Project shall meet the design requirements, with complete accessories, regular casting, smooth surface, no cracks, flexible opening and closing, and factory certificate. -
Detailed construction organization design of indoor fire pipeline and equipment installation project The pipes for the fire hydrant system shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. The specifications and models of alarm valve, action valve, control valve, retarder, water flow indicator, pump adapter and other main components of the fire sprinkler system shall meet the design requirements -
Indoor fire fighting pipeline and equipment installation scheme in a city Check the drawings of relevant disciplines, check whether the coordinates and elevations of various pipelines intersect or are arranged improperly, study and solve with the designer in time, and handle the negotiation procedures. -
Indoor fire pipeline and equipment installation organization scheme This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. The fire sprinkler pipes shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete thread, inaccurate angle, etc. -
Quality management of installation of indoor fire pipeline and equipment This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. The pipes of the fire hydrant system shall be selected according to the design requirements. Generally, carbon steel pipes or seamless steel pipes shall be used. The pipes shall not be bent, rusted, double skinned or uneven. -
Standard design scheme for indoor fire pipeline and equipment installation process This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. The fire sprinkler pipes shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete screw thread, and cold angle. -
Design and construction scheme for quality management of indoor fire pipeline and equipment installation in an urban area The fire sprinkler pipes for this project shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The pipe wall shall be galvanized evenly inside and outside, without rust and burrs, and the parts shall be free of bias, square thread, incomplete screw thread, and cold angle. -
Installation process of indoor fire pipeline and equipment Installation process of indoor fire pipeline and equipment -
Construction Scheme for Indoor Fire Pipe and Equipment Installation This project is the fire-fighting reconstruction project of Heluoshijia · Fanghuayuan, including the replacement of the main road, valves, fire hydrants, water pump adapters, and the installation of fire hydrant boxes in the commercial street. -
Process standard for installation of indoor fire fighting pipeline and equipment Process standard for indoor fire pipeline and equipment installation Process standard for indoor fire pipeline and equipment installation Process standard for indoor fire pipeline and equipment installation -
Indoor demolition and decoration, ground resurfacing - construction organization design Hohhot Wanda Plaza Grand Singer Cutting and Renovation Project, with an area of 625m2. Quality requirements: all outlets of our company must meet the national inspection and evaluation standards; Safety requirements: reach the "safe and civilized construction site in Inner Mongolia Autonomous Region". -
Process standard for installation of indoor fire pipeline and equipment The pipes for the fire hydrant system shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. The specifications and models of alarm valve, action valve, control valve, retarder, water flow indicator, pump adapter and other main components of the fire sprinkler system shall meet the design requirements -
Indoor fire fighting pipeline and equipment installation organization plan of a city This process standard is applicable to pipeline and equipment installation works of indoor automatic fire sprinkler system and fire hydrant system in civil and general industrial buildings. The fire sprinkler pipes shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete thread, inaccurate angle, etc. -
Construction scheme for installation of indoor fire pipeline and equipment The specifications and models of the alarm valve, action valve, control valve, retarder, water flow indicator, water pump adapter and other main components of the fire sprinkler system of the Project shall meet the design requirements, with complete accessories, regular casting, smooth surface, no cracks, flexible opening and closing, and factory certificate. -
Method statement for removal of fire-fighting equipment and pipes Scope of work: 1. Indoor fire pipeline, wiring and fire equipment removal works; 2. Demolition works of outdoor fire pipeline, wiring and fire equipment; (2) Construction water: water points shall be set according to the water source (hydrant) provided by the Owner, which shall be convenient for use. (3) Fire use management: when electric welding and gas cutting are used at the construction site, fire fighting shall be set up in addition to management personnel -
Fire pipeline wiring and fire equipment removal works Dismantle the site for inspection and hang warning signs → erect the scaffold that has passed the inspection → hang the removed pipeline of the hoist that has passed the inspection → hang the safety belt of the staff → start cutting the pipeline → pull the hoist to slowly put down the cut pipeline → transport it to 0 meters by elevator → transport it to the designated location by pallet truck. 2、 -
Construction design of a municipal water supply, fire protection and heating pipeline 2.1.2 The design scope includes: outdoor engineering water supply, outdoor pipeline, outdoor sewage pipeline, outdoor rainwater pipeline, outdoor fire hydrant, indoor fire hydrant pipeline and automatic sprinkler pipeline of the project, of which the automatic sprinkler pipeline is the pipe behind the alarm valve. -
Construction organization design scheme for installation of indoor fire pipeline and equipment of an electronic factory in Jiangjin District, Chongqing Main pipes of fire hydrant system shall be installed with pipes according to design requirements, and carbon steel pipes or seamless steel pipes shall be selected according to pressure requirements -
Fire fighting design for interior decoration of a school building The building nature of this project is a comprehensive building. The building is a Class I high-rise building according to the Code for Fire Protection Design of High rise Civil Buildings. The fire resistance rating of the building is Grade I, the seismic fortification intensity is Grade 6, the indoor environmental pollution control of the building is classified as Class II, and the structural system is a reinforced concrete frame shear wall structure. -
Design and installation of steam pipeline Design and installation of steam pipeline -
Process standard for installation of indoor fire pipeline and equipment The pipes for the fire hydrant system shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. -
Process standard for installation of indoor fire pipeline and equipment The pipes for the fire hydrant system shall be selected according to the design requirements. Generally, galvanized carbon steel pipes and pipe fittings shall be used. The inside and outside of the pipe wall shall be galvanized evenly, without rust and flash, and the parts shall be free of bias, square thread, incomplete screw thread, inaccurate angle, etc. -
Discussion on the design of indoor gas pipeline Based on many years of gas design practice, this paper summarizes how to comply with the current national norms and standards, and fully consider the interests of residents in the design of indoor gas pipelines, so as to achieve the goal of safe gas use, beautiful and practical. -
Model construction scheme for installation of indoor fire pipeline and equipment This document is a model construction scheme for the installation of indoor fire fighting pipes and equipment, including the scope, construction preparation, operation technology, quality standards, etc. It is detailed and can be used for reference. -
Implementation Rules for Supervision of Indoor Fire Protection Pipeline and Equipment Installation The specifications and models of alarm valve, action valve, control valve, retarder, water flow indicator, water pump adapter and other main components of the fire sprinkler system shall meet the design requirements, with complete accessories, regular casting, smooth surface, no cracks, flexible opening and closing, and factory certificate. -
Organization design scheme of pipeline equipment steel structure removal The demolition and installation of this demolition project are carried out by the Ninth Installation Company of our company. Since the transportation route is far away, the quantities of equipment, process, structure and other works are huge, and the equipment structure is out of shape, the company fleet is considered for transportation.
-
one Design of indoor fire pipeline -
two Fire fighting pipeline is designed indoors -
three Fire fighting pipeline is designed to be indoor -
four Buried design of indoor fire pipeline -
five Design pressure of indoor fire pipeline -
six Optimal design of indoor fire pipeline -
seven Design of self-made indoor fire pipeline -
eight Design of indoor fire pipe in villa