)The wiring of the automatic fire alarm system project shall comply with the provisions of the current national standard Code for Construction and Acceptance of 1KV and Below Electrical Installations Wiring Engineering GB50258-96.(2) The core section of the transmission line of the automatic fire alarm system shall not only meet the technical conditions, but also meet the mechanical strength requirements.Minimum copper core insulated conductor laid through pipes
This article is a code for fire protection design of high-rise buildings, which is described in detail from the classification of high-rise civil buildings, outdoor fire water supply pipeline settings, etc.
In addition to the provisions of this Code, the new version of the Code for Design of Shop Buildings should also comply with the General Principles for Design of Civil Buildings (JGJ37-87) and relevant design standards, codes and regulations issued by the state and professional departments.
1. System wiring: 2. Installation of fire detector 3. Installation of manual fire alarm button 4. Installation of fire alarm bell and door lamp 5. Installation of fire alarm controller 6. Fire emergency broadcasting 7. Special telephone for fire protection 8. Acceptance and intermediate acceptance of concealed works 9. Commissioning of automatic fire alarm system 10. System acceptance
The Ministry of Housing and Urban Rural Development is responsible for the management and interpretation of the mandatory provisions of this Code, the Fire Department of the Ministry of Public Security is responsible for the daily management, and the Shenyang Fire Research Institute of the Ministry of Public Security is responsible for the interpretation of the specific technical content.
This specification is divided into 14 chapters and 7 appendixes, including: general rules, terminology, design water consumption of fire water supply system, fire water supply system, fire water source, water supply facilities, fire hydrant system, pipe network of fire water supply system, fire drainage, hydraulics
The wood specification is applicable to the construction of new, expanded and reconstructed shops in cities, towns and industrial and mining areas throughout the country (including shops in comprehensive buildings)
The Code for Design of Store Buildings JGJ48-2014 was implemented on December 1, 2014. Please download what you need and do not use it for commercial purposes. Please support the genuine version!
This paper briefly introduces the fire protection specifications for diesel generators, including the configuration of fire protection facilities, fire protection settings, etc
This document is JGJ 48-2014 Code for Design of Store Buildings.The contents include: general rules, terms, etc.The content is detailed and can be used for reference.
In this project, the seismic fortification target, seismic fortification category, site classification, response spectrum and seismic design method of the Chinese seismic code GB 50011-2010 and the Australian seismic code AS11704-2007 carried out a detailed comparative analysis, and pointed out the similarities and differences between the two codes, which is helpful to further understand China's seismic code GB
This document is GB 50072-2010 Code for Design of Cold Storage. It contains complete and detailed contents, which can be downloaded by designers for reference.
This document is GB 50157-2003 Code for Design of Metro, which contains complete and detailed contents and can be downloaded by designers for reference.
In view of the different expressions of fire protection design codes on fire water supply design, which leads to different requirements of the same project in different codes, this paper discusses the rationality of each code's guidance on fire water supply design in combination with actual projects
By comparing the difference between the "Code for Residential Buildings" and the relevant provisions of the current national technical standards for fire protection, this paper puts forward the viewpoint of residential fire protection design.
The Code for Design of Chimneys is now approved as a national standard, numbered GB 50051-2002, and will be implemented as of May 1, 2003.Among them, 3.1.1, 3.1.3, 3.2.2, 4.1.6, 5.2.1, 5.6.1, 5.6.2, 6.6.10, 7.1.1, 1.2, 8.1.4
There are 14 chapters and 12 appendices after this revision.In addition to maintaining the provisions partially revised in 2008, the main contents of the revision are: the provisions on seismic measures for fortification of 7 degrees (0.15g) and 8 degrees (0.30g) have been supplemented, and the design earthquake grouping has been adjusted according to the Seismic Ground Motion Parameter Zoning Map of China;Improved the formula of soil liquefaction;The seismic influence coefficient is adjusted
This specification is applicable to heating hot water medium with design pressure less than or equal to 2.5MPa and design temperature less than or equal to 200 ℃;The design of the following heating networks with the design pressure of heating steam medium less than or equal to 1.6MPa and the design temperature less than or equal to 350 ℃.
According to the requirements of the Regulations on Post Wenchuan Earthquake Recovery and Reconstruction issued by the State Council and the No. 1 Revision of Earthquake Ground Motion Parameters of the disaster area revised by the Seismological Bureau, the fortification intensity of the disaster area has been changed accordingly, and it is proposed to add some amendments to the articles. A total of 28 to 29 articles have been changed. The contents are as follows: 1Change of fortification intensity in disaster area, involving Sichuan, Shaanxi and Gansu
The wet system shall be used in places where the ambient temperature is not lower than 4 ℃ and not higher than 70 ℃.Dry system shall be adopted for places with ambient temperature lower than 4 ℃ or higher than 70 ℃
The latest design specifications for general hospitals can be downloaded if you are interested.The latest design specifications for general hospitals can be downloaded if you are interested.
This specification mainly describes the technical requirements for the design, materials, construction, inspection, commissioning and acceptance of the ground radiant heating project. I hope it will be helpful to you.
The topic of store fire protection design code provides you with documents related to store fire protection design code to share. You can download the documents related to store fire protection design code for learning and reference. For more contents related to store fire protection design code, please visit