-
Volume design and calculation of fire pool The volume of fire pool shall be calculated as the total fire water consumption of indoor fire hydrant Q1, outdoor fire hydrant Q2 and sprinkler system Q3 during the fire time, that is, the sum of three flows multiplied by the fire duration -
Construction design scheme of a fire pool The formwork used in this project is double faced mirror formwork with a thickness of 18mm. After mobilization, the formwork shall be inspected by relevant personnel of the Project Department and can be used only after it is qualified. The wooden brace used for strengthening the formwork shall be planed by pressure planing to ensure consistent size. -
Construction organization design (scheme) of daily fire pool This document is the construction organization design (scheme) of the daily fire pool, including: mechanical excavation is mainly used for the excavation of foundation pit earthwork. When the elevation of the foundation base is reached, the surrounding of the engineering pile, the enclosure and the support pile shall be manually coordinated, and the earthwork shall be transported outside with the truck. (1) Backhoe excavator (2) shall be used for selection of excavation machinery. -
Construction organization design scheme of fire pool Since the top of the pool is a floor slab, the beam slab shall be poured at one time. The beam section dimensions are: 250 × 500 mm, 300 × 600 mm, 250 × 700 mm, 300 × 500 mm. The beam and its top plate shall be erected and poured together. The beam side formwork is used to cover the bottom formwork, and the floor formwork is used to press the beam side formwork. The spacing of wood beams on the beam side is 200mm -
Construction organization design of fire pool and pump room Construction organization design of fire pool and pump room -
Construction design of a 38m fire pool and pump room The fire pool and pump house of XXXXXX project are located at the Pa-7 to 10 axis of the ramp. The total length of the fire pool is 38.2m and the width is 9m. The bottom plate of the pool is - 3m (local suction pit is - 4m), and the thickness of the bottom plate is h=450/500. The top elevation of the pool wall is+3m, and the total height is 6m. The top of the pool is bricked up to the lane beam or slab bottom. Water pump room -
Construction organization design of Puyang Wanli fire pool This document is the construction organization design of Puyang Wanli fire pool. The content is detailed and can be used for reference. -
Construction organization design of fire pool in Xiaoyi City, Shanxi Province This project is a fire production water tank project, which is located on the right side of the sewage treatment station at the upper part of the main inclined shaft in the industrial plant area of Shanxi Fenxi Zhengwen Coal Industry Co., Ltd. in Duzhen Town, Xiaoyi City, Shanxi Province. According to the design requirements, the water tank is a 430m3 round reinforced concrete reservoir, and the height of the tank top is 500mm. The diameter is 12600mm and the height is 3500mm. Cushion concrete is C -
Waterproof construction scheme of fire pool JS cement-based waterproof coating+polyethylene polypropylene fiber, this practice abandons the common practice of SBS high polymer modified asphalt roll, because the fire pool is relatively closed, this process is used instead, which meets both construction requirements and safety requirements. -
Construction organization design of garage and fire pool project of a certain court The ground garage and underground reinforced concrete shear wall fire pool of the ancillary works of the trial court of the Sunk Court have a floor area of 391.8m2 above the ground and 241.2m2 below the ground. -
Installation and construction design of fire pool and pump room equipment in Shanxi coal mine This document is an overview of the construction organization design project of the fire pool and pump room equipment installation project in Shanxi Open pit Coal Mine: the water pump room is of brick concrete structure, with a building area of 63.13m2, one floor and a building height of 3.45m. The fire pool is of reinforced concrete structure with a volume of 500m3. The water pump room is equipped with a set of water supply pump and KQ -
Construction organization design scheme for fire pool and pump room of an office building in Shanghai It is strictly prohibited to add water arbitrarily in the concrete, and the water cement ratio shall be strictly controlled. Excessive water cement ratio will affect the expansion rate of UEA shrinkage compensating concrete, and directly affect the effect of shrinkage compensation and shrinkage crack reduction -
Special organization construction design scheme of fire pool project in a city community The underground water level monitoring of this project should be carried out by setting a water level pipe in the hole and using water level gauge and other methods. The underground water level monitoring accuracy should not be less than 10mm. -
Special safety construction scheme design for earthwork excavation of fire pool Project overview, preparation basis, construction deployment, construction scheme and technical measures, emergency measures for foundation pit support -
Construction scheme of fire pool and pump room The fire pool and pump house of 500kV Zongjiang (East Zong) substation are located in the southwest corner of the station area. The fire pool and pump house are very close, the foundation is almost close together, and the fire pool is in the south of the pump house. The foundation shall be set in the undisturbed solid soil layer, moderately weathered argillaceous silt stratum, and the foundation bearing capacity shall not be less than 180 pka. If it fails to meet the requirements, C20 plain concrete shall be used for replacement. -
Construction scheme of fire pool in a park The Industrial Logistics Park Project of Pross (Chengdu) High tech Zone is located in the West High tech Zone of Chengdu, to the south of Hongguang Road, Hongguang Town, Pixian County, Chengdu, opposite the Chengdu Bonded Logistics Center across Hongguang Road. The construction unit of the project is Pross (Chengdu) High tech Zone Industrial Logistics Park Development Co., Ltd., the design unit is the 11th Design and Research Institute of Information Industry Electronics, and the survey unit is the survey and design unit of China Machinery Engineering Corporation -
Construction scheme of underground fire pool Construction scheme of underground fire pool, including mechanical excavation of foundation pit, fabrication and installation of foundation formwork, beam formwork construction method, reinforcement engineering construction, etc -
Construction scheme of fire pool This document is the construction scheme of a fire pool. The content is detailed and can be used for reference. -
Construction organization design of fire pool project at the entrance and exit of a tunnel in Nanshan Project name: fire pool at the entrance and exit of xx tunnel Project location: introduction to the entrance and exit of xx tunnel of the new railway Baihe section project in the east of northeast China: the bottom plate, pool wall, top plate and pillar of the fire pool project are all reinforced concrete structures. The project is 12.9 meters long, 8.9 meters wide, 3.9 meters high, and the buried depth of the bottom plate is - 4.1 meters. Local bottom plates are buried -
Supplementary technical measures for fire pool design of civil buildings in Sichuan Province Design code for water supply and drainage discipline - applicable to front-line designers of major architectural design institutes and real estate developers throughout the country. -
Construction organization design scheme for fire pool and pump house of Purlin Ying Manchu Mongolian Primary School The waterproof base of the project is the cement mortar leveling layer. The mix proportion of cement mortar shall not be less than 1:3, and the cement grade shall not be less than 32.5; Controlling the mix proportion of cement mortar is the key to improve the soundness of the base course and prevent sanding. -
Construction drawing of reinforced concrete fire pool Reinforced concrete fire pool construction drawing, calculation sheet, manual, reinforced concrete fire pool construction drawing -
On site supervision scheme for a residential fire pool project 1、 Earthwork, waterproofing and concrete pouring works for the reconstruction of the new fire pool and ice storage refrigeration heating station within the scope of site supervision. On site supervision shall be carried out for the following parts or processes of the project: (I) foundation works: 1. tamping process of base plain soil and surrounding backfill of fire pool. 2. Concrete pouring process for raft foundation, shear wall and roof of fire pool. -
Construction scheme of open caisson of fire pool in a mall The south side of the fire pool of the mall is the mall, and the north side is a six storey residential building 6 meters away from the fire pool. The bottom elevation of the fire pool is 5.6m. In order to ensure the use safety of the residential building during construction, the fire pool adopts the construction method of open caisson. During construction, the open reinforced concrete shaft is first made in the pit, and after it reaches the required strength, it is excavated and transported out in layers in the shaft, so that the shaft is -
What should be paid attention to when selecting water level gauge for fire pool This document is to provide detailed requirements for the selection of water level gauge in fire pool, including the selection of field probe - water pool installation matters - secondary meter selection scheme and basic operation guide -
Construction scheme of fire pool and pump room of a project The fire pool and pump house of XXXXXX project are located at the Pa-7 to 10 axis of the ramp. The total length of the fire pool is 38.2m and the width is 9m. The bottom plate of the pool is - 3m (local suction pit is - 4m), and the thickness of the bottom plate is h=450/500. The top elevation of the pool wall is+3m, and the total height is 6m. The top of the pool is bricked up to the lane beam or slab bottom. The water pump room is located in Pa-1 -
Construction scheme of fire pool and concrete retaining wall 1. The - 2F floor of the project is designed as a fire pool, ranging from 2-5 axis to 2-8 axis/2-A-2-D axis, with the bottom plate elevation of -11.76M and the bottom plate elevation of the suction tank of -12.76M; The elevation of top slab is -4.85M. The range of axis 2-5 to axis 2-6 is the pump room, and axis 2-6 to axis 2-8 is the pool. 2. Structural design ① Pool foundation design -
Construction organization design of fire pump room The main contents of this data include: preparation description, project overview, project objectives, construction scheme, construction method, construction network plan chart, project quality assurance measures, safety construction assurance measures, construction period assurance measures, rainy season construction measures, on-site civilized construction measures, construction personnel allocation, management personnel allocation, technical personnel allocation, and construction machinery allocation plan. -
Special construction scheme for fire pool and pump room The renovation project of Kwai Chung People's Hospital - pump house and fire pool, located in Kwai Chung People's Hospital, Longgang District, Shenzhen, includes the construction of pump house and fire pool. -
Special construction scheme for fire pool - formal The concrete strength is C15 for the foundation cushion, and C30 for other concrete components. Waterproof and impermeable concrete is used for the pool wall and foundation slab. The impermeability grade of the concrete is P6. Compacting agent must be added to the concrete. The shrinkage ratio 28 days after the addition of the admixture should preferably be 0, the permeability height ratio should be less than 32%, and the bleeding rate should be less than 40%. The frost resistance grade of concrete is F150, and the water cement ratio should not be greater than 0 -
Detailed document of fire pool construction in a region This document is the detailed document of the construction of a fire pool in a certain area, including the reservation of horizontal construction joints of the pool. The document meets the standards for reference. -
Construction scheme of fire pool (confined space) Before construction, construction management personnel and construction operators shall master the detailed structure and relevant technical requirements in the construction drawings. The technical disclosure shall be implemented by each person. Prepare all materials according to the design requirements, and count the specifications and quantities of materials required after the design review. The incoming materials used shall be provided with product quality assurance certificate and test report. The incoming materials shall be sampled and retested as required to ensure their quality meets the requirements -
Winter construction design scheme of fire pool in a social welfare center Shenyang Social Welfare Institute Service Guarantee Center Project is located in Shenyang Social Welfare Institute. The construction unit is Shenyang Social Welfare Institute. It is designed by Liaoning North Architectural Design Institute, surveyed by Dongmei Shenyang Geotechnical Company, and supervised by Shenyang Construction Supervision Company. The project is constructed by Liaoning Jindi Second Construction Engineering Co., Ltd, See plane layout for specific location -
Special safety organization design and construction scheme for earthwork excavation of Jiangsu fire pool In the process of foundation pit excavation, if the local displacement is too large, the excavation shall be stopped immediately, and earthwork backfilling or back pressure with sandbags shall be carried out. After the slope is stable, measures such as adding temporary support, adding pull anchors, and local sloping and unloading shall be taken for reinforcement. -
Construction organization design scheme for the fire pool and pump house of Wangguanji Junior Middle School in a city Firstly, the axis located on the foundation slab shall be measured on the base plate, and the internal line, side line and external control line of the formwork shall be snapped with ink lines according to the axis position. The three lines must be in place before construction.
