-
Discussion on air volume design of fire smoke exhaust Discussion on air volume design of fire smoke exhaust, mainly describing the fire exhaust design of ordinary air conditioning system and purification air conditioning system -
Construction Design of Air Conditioning Ventilation and Fire Smoke Exhaust for Multi storey Office Building The total building area is 40000m2, and the building height is about 25m. The building consists of two floors underground and six floors above the ground, of which the second floor underground is for civil air defense, and each floor above the ground is for commercial use, atrium, multi-function hall, conference room, Boeing room, etc. Construction scope: air conditioning water system, air conditioning ventilation system, fire control and smoke exhaust system The data is 33 pages in total. -
Construction Organization Design of Air Conditioning Ventilation and Fire Smoke Exhaust in Multi storey Office Building XX Building Project has a total construction area of 40000m2 and a building height of about 25m. The building consists of two floors underground and six floors above the ground, of which the second floor underground is for civil air defense, and each floor above the ground is for commercial use, atrium, multi-function hall, conference room, Boeing room, etc. Scope of construction: air conditioning water system, air conditioning ventilation system, fire control and smoke exhaust system. -
Construction Organization Design of Air Conditioning Ventilation and Fire Smoke Exhaust in Multi storey Office Building This data is: the construction organization design of air conditioning, ventilation and fire smoke exhaust in the multi-storey office building. Before the installation of the fan coil unit, a single unit three speed test run and hydraulic test should be carried out. The test pressure is 1.5 times of the working pressure. If there is no leakage, it is qualified. The design is accurate and complies with the relevant specifications, which can be used for reference and learning by designers! -
Case analysis of plant fire protection design Designed according to foreign fire protection standards, exchange of domestic fire protection regulations with foreign standards -
Fire Protection Design Manual 2007.08.27 All kinds of design data of a complete set of automatic fire alarm and control products consisting of various fire alarm controllers, manual control panels, gas fire extinguishing panels, floor displays, smoke and temperature detectors, input and output modules, manual fire alarm buttons, fire hydrant buttons, short circuit isolators, repeaters, etc. -
Multi line Design and Installation Tutorial Multi line Design and Installation Tutorial -
Discussion on fire protection design of clean workshop The clean workshop is a special kind of production workshop. In addition to meeting the basic requirements of the specification, the fire protection design of the clean workshop should also be based on local conditions and be realistic. In addition, when meeting the requirements of building fire protection facilities, it is recommended to provide fire extinguishing facilities for some key production equipment, equipment using flammable and explosive liquids or equipment with expensive value -
Application requirements for fire protection design documents Details of application requirements for fire protection design documents -
Fire protection construction organization design of a project According to the specific situation of the fire protection system of the office building, the following overall construction scheme is proposed: in order to ensure the construction quality, the construction must be carried out in strict accordance with the specifications. Considering the construction period of this project, the personnel allocation is basically fixed. The following construction precautions and requirements must be strictly followed for safe construction. -
Some Suggestions on Fire Protection Design A point of view in 10.2.2 of Code for Fire Protection Design GB5116-98 -
Fire protection design of a factory in Guangdong Special section on fire protection design of a factory in Guangdong: the planned total land area of the factory is 22074.510m2, and the total building area is 32284.17m2. -
Electrical description of building fire protection design The structural form is frame structure; The seismic fortification category of the building is Class C, the safety level of the building structure is Class II, and the seismic fortification intensity is 7 degrees. Design basic seismic acceleration 0.10g, design seismic grouping: Group I; Site category: Class III; The characteristic period Tg=0.45sec Each floor of the business hall is a fire compartment with an area of ≤ 2500 ㎡. -
Fire fighting design documents for decoration of a hotel The latest 2015 specification shall be adopted as the fire protection design document for the secondary decoration of the hotel. The construction drawing of the original XX Software Building # 3 has determined the indoor decoration materials (all parts) and passed the fire protection review; This design is due to the change of the use function of Building 3 # of XX Software Building from the original staff dormitory to XX Hotel (XX Donghai Store). This drawing is based on the architectural engineering -
Fire protection design of small space duplex building The building with small space and jump floor refers to the building with "space use function" of adjacent floors combined. Usually, the adjacent floor space is connected in one floor through indoor stairs or escalators. -
Construction design of fire protection organization for a project This project is Dongguancheng fire protection project, located in Dazu District, Chongqing. The construction area of the project is 75918.8 square meters, and the base area is 12474 square meters; The ground is composed of 4 buildings. Among them, Building 1 has 31 floors in total, with 1~3 floors for commercial use and 4 floors and above for residential use. The total height of the building is 96.8m. -
Fire protection design of high-rise office and hotel Architectural design layout, transformed into hotel office building design, transformed into dormitory in a certain area, including architectural design drawings from the ground floor to the top floor -
Construction organization design of a fire station This document is the construction organization design of a fire station, and its contents are only for reference. Thank you for your participation -
Analysis on 100 Cases of Fire Protection Design Defects In the design of bus linkage system, the fire control room did not consider the manual direct control of main fire extinguishing equipment. For example, CO2 gas fire extinguishing system. -
Fire protection design+construction guidance+acceptance Fire protection design+construction guidance+acceptance (urban fire station building standard+code for design, installation and acceptance of independent smoke detection and alarm device DB-50-288-2008+[Guangdong] DBJT15-77-2010 code for design, construction and acceptance of electrical fire monitoring system+14X505-1 diagram of automatic fire alarm system design code -
Construction organization design of a fire station The contracting mode of this project is to contract labor, materials, quality, progress, safety and civilized construction. -
Smoke exhaust design of a polyester filament workshop This document is about the smoke exhaust design of a polyester filament workshop. According to the specific situation of a polyester filament workshop, the smoke exhaust design is explored and practiced, and personal opinions are put forward on the applicability of the current fire protection design specifications in the chemical fiber industry. It is suggested that the relevant departments formulate fire protection design specifications or clauses suitable for the industry. The content is detailed and worth downloading. -
Application Form for Filing of a Fire Protection Design This document is an application form for the filing of a fire protection design. The contents are complete and can be downloaded -
Construction organization design of forced smoke exhaust and ventilation for fire fighting in the smoke exhaust project of the Culture and History Museum The guiding ideology of this construction organization design scheme is: to ensure the Owner's needs for the construction period, quality, safety and civilized construction of the smoke inlet and exhaust installation project, to ensure the project quality as the overall goal, to take the design drawings and construction acceptance specifications as the standard, to carefully organize, plan, scientifically manage, actively apply new technologies, new materials, new processes, new equipment, high-quality, efficient Complete safely -
Construction organization design scheme of a basement fire smoke exhaust and ventilation project This project is the green space civil air defense project of Jiangcheng International Ruihongyuan Center, with a building area of about 6700m2. It is usually a car parking garage, which is divided into three fire compartments. In wartime, it is divided into Grade 6B and Grade 6 personnel shelter department, which is divided into three protection units. This bid is for civil air defense and fire fighting works, and only for sprinkler and fire fighting, fire alarm and ventilation systems, the construction scheme is prepared. -
Water supply, drainage and fire protection design of Weilisi Mansion Located in Hohhot, Inner Mongolia, Weilisi Building is a comprehensive high-rise building integrating office and hotel, with a total height of 62.6 meters. The underground floor of the building is the power distribution room, water pump room, equipment room, etc., and the indoor ground elevation is -4.35m; There are 17 floors above the ground, and the first floor is the reception hall, with the floor height of 5.4m; The second floor is a coffee shop, restaurant and warehouse, -
Code for Residential Buildings and Residential Fire Protection Design By comparing the difference between the "Code for Residential Buildings" and the relevant provisions of the current national technical standards for fire protection, this paper puts forward the viewpoint of residential fire protection design. -
Design of fire protection electrical system for high-rise buildings Let's have a look! Let's encourage each other! -
Fire protection design of high-rise complex building Through the concrete example of hotel design, this paper summarizes the design essentials of hotel fire automatic alarm system in high-rise buildings, the selection of regional alarm controller, the division of detection areas and the location of fire detectors. Fire fighting linkage equipment and its control. The project has large capacity and complex system. In addition to the above ground shopping malls and high-end hotels, the first and second floors of the underground are equipped with centralized ventilation and air conditioning systems -
Some views on fire protection design of a comprehensive building Based on the analysis of the design of a complex building, it is concluded that the sprinkler system and the indoor hydrant system should be set separately. The valves of the sprinkler system, the end water testing device and the pump adapter shall be set reasonably. -
Discussion on electrical design of building fire protection In high-rise and more complex multi-storey civil buildings, a perfect fire electrical design system is very important for the timely and reliable operation of various fire electrical equipment in the building, effective evacuation of personnel, materials and control of fire spread after a fire. Here are some personal experiences. -
Problems easy to exist in fire protection design This paper mainly discusses the problems that are easy to occur in fire protection design. -
Clean Air Conditioning Design and Installation Tutorial If the production process has no special requirements for temperature and humidity, it is appropriate to wear clean work clothes without discomfort. The general control temperature and relative humidity in areas with air cleanliness of Class 100 and Class 10000 are 20~24 ℃ and 45~60% respectively. The general control temperature of Class 100000 area is 18~28 ℃, and the relative humidity is 50~65%. -
Course of Central Air Conditioning System Design Central air conditioning system design course, mainly introduces the design and selection of conventional central air conditioning system equipment 1. Water cooled chiller air conditioning system 2. Air cooled chiller air conditioning system -
Design of fire linkage control system When designing the automatic fire alarm and fire linkage control system, first define the building characteristics and functional characteristics of the building itself, understand the facilities of other disciplines in the fire protection engineering design of the building, especially the design requirements of the equipment (ventilation, water) discipline for the electrical discipline, and then determine the overall structure of the system according to the relevant specifications. According to High rise Civil Building Design -
Design of fire linkage alarm system based on lonworks The fire alarm monitoring system is one of the important standards to measure the degree of building intelligence. However, most of the existing buildings have made the fire monitoring system of each building an independent individual due to historical reasons. Therefore, each building needs to assign special personnel to be on duty 24 hours a day, which not only wastes human and material resources, but also limits the management level of fire information. With the network
-
one Course of fire protection design and construction -
two Course of Industrial Fire Protection Design -
three Tutorial of Building Fire Protection Design -
four Course of Fire Water Supply Design -
five Fire Element Design Tutorial -
six Full course of fire protection design -
seven Fire Sprinkler Design Tutorial -
eight Fire Protection Design Tutorial 03