Fire protection design features

Discussion on design characteristics of fire protection system in large commercial buildings

There is no specific definition of which types of large-scale commercial buildings belong to large-scale commercial buildings in the national specifications. According to the local codes issued in Chongqing and Henan, it is defined as a building with a floor area of more than 5000m2 or a total floor area of more than 15000m2 used for commercial activities.

Design and characteristics of VRV air conditioner

This paper analyzes the working characteristics of each system component for VRV air conditioning system, and on this basis, studies and discusses the design parameters, design points and test methods of its indoor and outdoor units, providing a reference for the design researchers of VRV air conditioning system, relevant test methods and the formulation of product standards.

Fire protection design+construction guidance+acceptance

Fire protection design+construction guidance+acceptance (urban fire station building standard+code for design, installation and acceptance of independent smoke detection and alarm device DB-50-288-2008+[Guangdong] DBJT15-77-2010 code for design, construction and acceptance of electrical fire monitoring system+14X505-1 diagram of automatic fire alarm system design code

Construction organization design of a fire station

This document is the construction organization design of a fire station, and its contents are only for reference. Thank you for your participation

Discussion on fire protection design of clean workshop

The clean workshop is a special kind of production workshop. In addition to meeting the basic requirements of the specification, the fire protection design of the clean workshop should also be based on local conditions and be realistic. In addition, when meeting the requirements of building fire protection facilities, it is recommended to provide fire extinguishing facilities for some key production equipment, equipment using flammable and explosive liquids or equipment with expensive value

Application requirements for fire protection design documents

Details of application requirements for fire protection design documents

Features of various fire-fighting facilities

The characteristics of various fire-fighting facilities are compared! Make people have a more comprehensive understanding of these facilities

Fire protection design of small space duplex building

The building with small space and jump floor refers to the building with "space use function" of adjacent floors combined. Usually, the adjacent floor space is connected in one floor through indoor stairs or escalators.

Fire protection design of a factory in Guangdong

Special section on fire protection design of a factory in Guangdong: the planned total land area of the factory is 22074.510m2, and the total building area is 32284.17m2.

Construction design of fire protection organization for a project

This project is Dongguancheng fire protection project, located in Dazu District, Chongqing. The construction area of the project is 75918.8 square meters, and the base area is 12474 square meters; The ground is composed of 4 buildings. Among them, Building 1 has 31 floors in total, with 1~3 floors for commercial use and 4 floors and above for residential use. The total height of the building is 96.8m.

Fire protection design of high-rise office and hotel

Architectural design layout, transformed into hotel office building design, transformed into dormitory in a certain area, including architectural design drawings from the ground floor to the top floor

Case analysis of plant fire protection design

Designed according to foreign fire protection standards, exchange of domestic fire protection regulations with foreign standards

Fire Protection Design Manual 2007.08.27

All kinds of design data of a complete set of automatic fire alarm and control products consisting of various fire alarm controllers, manual control panels, gas fire extinguishing panels, floor displays, smoke and temperature detectors, input and output modules, manual fire alarm buttons, fire hydrant buttons, short circuit isolators, repeaters, etc.

Electrical description of building fire protection design

The structural form is frame structure; The seismic fortification category of the building is Class C, the safety level of the building structure is Class II, and the seismic fortification intensity is 7 degrees. Design basic seismic acceleration 0.10g, design seismic grouping: Group I; Site category: Class III; The characteristic period Tg=0.45sec Each floor of the business hall is a fire compartment with an area of ≤ 2500 ㎡.

Analysis on 100 Cases of Fire Protection Design Defects

In the design of bus linkage system, the fire control room did not consider the manual direct control of main fire extinguishing equipment. For example, CO2 gas fire extinguishing system.

Fire protection construction organization design of a project

According to the specific situation of the fire protection system of the office building, the following overall construction scheme is proposed: in order to ensure the construction quality, the construction must be carried out in strict accordance with the specifications. Considering the construction period of this project, the personnel allocation is basically fixed. The following construction precautions and requirements must be strictly followed for safe construction.

Some Suggestions on Fire Protection Design

A point of view in 10.2.2 of Code for Fire Protection Design GB5116-98

Structural design characteristics of building curtain wall

This document is about the structural design features of building curtain walls. The main contents are: 1. Overview 2. Structural design of curtain walls in coordination with buildings 3. Detailed structural design of curtain walls 4. Fireproof structural design of curtain walls 5. Lightning protection design of curtain walls

Construction organization design of a fire station

The contracting mode of this project is to contract labor, materials, quality, progress, safety and civilized construction.

Application Form for Filing of a Fire Protection Design

This document is an application form for the filing of a fire protection design. The contents are complete and can be downloaded

Special Section on Fire Protection and Safety Design.pdf

Fire protection construction organization design (1). pdf

Fire fighting design documents for decoration of a hotel

The latest 2015 specification shall be adopted as the fire protection design document for the secondary decoration of the hotel. The construction drawing of the original XX Software Building # 3 has determined the indoor decoration materials (all parts) and passed the fire protection review; This design is due to the change of the use function of Building 3 # of XX Software Building from the original staff dormitory to XX Hotel (XX Donghai Store). This drawing is based on the architectural engineering

Design of fire linkage control system

When designing the automatic fire alarm and fire linkage control system, first define the building characteristics and functional characteristics of the building itself, understand the facilities of other disciplines in the fire protection engineering design of the building, especially the design requirements of the equipment (ventilation, water) discipline for the electrical discipline, and then determine the overall structure of the system according to the relevant specifications. According to High rise Civil Building Design

Design of fire linkage alarm system based on lonworks

The fire alarm monitoring system is one of the important standards to measure the degree of building intelligence. However, most of the existing buildings have made the fire monitoring system of each building an independent individual due to historical reasons. Therefore, each building needs to assign special personnel to be on duty 24 hours a day, which not only wastes human and material resources, but also limits the management level of fire information. With the network

Fire protection design of high-rise complex building

Through the concrete example of hotel design, this paper summarizes the design essentials of hotel fire automatic alarm system in high-rise buildings, the selection of regional alarm controller, the division of detection areas and the location of fire detectors. Fire fighting linkage equipment and its control. The project has large capacity and complex system. In addition to the above ground shopping malls and high-end hotels, the first and second floors of the underground are equipped with centralized ventilation and air conditioning systems

Some views on fire protection design of a comprehensive building

Based on the analysis of the design of a complex building, it is concluded that the sprinkler system and the indoor hydrant system should be set separately. The valves of the sprinkler system, the end water testing device and the pump adapter shall be set reasonably.

Discussion on electrical design of building fire protection

In high-rise and more complex multi-storey civil buildings, a perfect fire electrical design system is very important for the timely and reliable operation of various fire electrical equipment in the building, effective evacuation of personnel, materials and control of fire spread after a fire. Here are some personal experiences.

Discussion on air volume design of fire smoke exhaust

Discussion on air volume design of fire smoke exhaust, mainly describing the fire exhaust design of ordinary air conditioning system and purification air conditioning system

Problems easy to exist in fire protection design

This paper mainly discusses the problems that are easy to occur in fire protection design.

Design Features of Taipu River Pump Station Project

Abstract: Taipu River Pump Station is a large (1) type pump station, which has the characteristics of low head and large flow. The design has carried out a series of tests and research work on some major technical problems, and applied these scientific research and design results to engineering practice, making the hub layout, building design, electromechanical equipment selection and layout more reasonable.

Fire protection construction organization design of the Chamber of Commerce Building

The fire protection project of the Chamber of Commerce Building is located beside the best bridge of Nanlei South Road, developed and constructed by Tongji Engineering Construction Management Co., Ltd. and constructed by Construction Group Co., Ltd. The project covers a total area of 13048 ㎡, with a total construction area of about 59473 ㎡. The building is 184m long from south to north, 65m wide from south to north, 38m wide from north. It is a frame tube structure with one underground floor and two 23 storey main buildings from north to south above the ground

Discussion on Fire Fighting Design of Theater Engineering

Discussion on fire fighting design of theater project, including western fire water supply systems such as rain shower and water curtain, for reference

Construction organization design of an oilfield fire station

The project is a brick concrete structure with partial frame structure. The safety level of the building structure is Level II, the design service life of the structure is 50 years, the design level of the foundation is Level C, and the quality control level of the masonry construction is Level B. The seismic fortification intensity is 7 degrees. The design earthquake basic acceleration value is 0.15g, the design earthquake group is the first group, the building seismic fortification category is C, and the structural seismic fortification category is III

Fire fighting construction organization design of education base

1. Basic information of the project 1.1 Project name: fire protection construction project of traditional education base 1.2 Project address: 1.3 Building area: 1.4 Design unit: Design and Research Institute (Group) Co., Ltd. 1.5 Quality requirements: ensure that the main works can pass the inspection and acceptance of the fire department and reach the provincial level of excellence or above. 1.6 Construction period requirements: 60 calendar days

Talking about the design of fire water supply in a commercial residential area

Based on the fire protection design concept of "safe and applicable, advanced technology and reasonable economy", this paper introduces in detail the fire water source, water volume and design parameters of the indoor and outdoor fire hydrant systems, automatic sprinkler, large space intelligent active sprinkler, water spray, automatic sprinkler foam combined fire extinguishing systems in a commercial and residential area. At the same time, some design experiences in fire water supply design are summarized

Fire protection design of a high-rise office building

The project is a high-rise office building with 21 floors above the ground and 1 floor underground, with a total building area of 22521m2

Fire fighting construction organization design of a building

The construction organization design of building fire protection in a certain place has detailed contents, which can be downloaded by netizens.

Design of Fire Water Supply System in Chongqing

Chongqing fire water supply system is introduced, which is a constant pressure fire water supply system for roof water tank. The system has the characteristics of less equipment, small floor area, investment saving, simple maintenance and operation management, safe and reliable without overpressure.

Code for acceptance and design of hotel fire protection

）The wiring of the automatic fire alarm system project shall comply with the provisions of the current national standard Code for Construction and Acceptance of 1KV and Below Electrical Installations Wiring Engineering GB50258-96. (2) The core section of the transmission line of the automatic fire alarm system shall not only meet the technical conditions, but also meet the mechanical strength requirements. Minimum copper core insulated conductor laid through pipes