Construction Scheme for Tower Crane Foundation in Bid Section

Construction Scheme for Tower Crane Foundation of Lot I of Ordinary Commercial Housing N1 (09-07) in Gangxi New Town

The total construction area is 40166.92 ㎡. There are 17 buildings in this project, including 2 buildings on 7 floors, 10 buildings on 6 floors, 5 buildings on 11 floors, and 11 floors with one underground floor. The highest building is 35.95m. 3 #~14 # buildings are of pile foundation bearing platform beam foundation and reinforced concrete shear wall structure. 22 #~26 # buildings are piled raft foundation and reinforced concrete shear wall structure

Construction scheme for tower crane foundation and installation

Three tower cranes are selected for this project, which are respectively arranged at 0A ～ 0B/9 ～ 10 axis, E ～ (2/C)/01 ～ 1 axis and 14 outer/K ～ (2/H) axis (see Figure 1 Tower Crane Layout Plan for specific locations). Two tower cranes are under the foundation raft, one tower crane is outside the building, and the tower bodies of 1 # and 2 # tower cranes pass through the underground four floors to

Special construction scheme for tower crane foundation

This document is a special construction scheme for tower crane foundation. The vertical transportation of this project is mainly completed by tower crane. Due to the large volume of the project, it is proposed to use QTZ5013 tower crane with arm length of 50m and height of 135m in the construction of the main building, which is installed in the southwest corner of the main building.

Tower crane foundation and installation construction scheme

This scheme is the technical scheme and requirements for the foundation and installation construction of QTZ5013 tower crane. The tower height is 50 meters, the arm length is 50 meters, and the center of the tower crane is 4.0 meters away from the wall. Tower crane can be full at this position

Construction Scheme for QZT100 Tower Crane Foundation

The project is located at the northwest side of the intersection of Yanming Avenue and Haihang Road, with a total construction area of 201300 ㎡. There are six high-rise residential buildings in the project, namely, 1, 2, 3, 5, 6, and 7 # buildings, one floor underground, and 25 floors above the ground except for 7 # building, whose structure is shear wall; Building 8~12 # for the 3-storey commercial building of Building 5, and 2-storey for kindergarten and nursing home, structure

QTZ80 tower crane foundation construction scheme

The project is a 27 storey high-rise residential building with a storey height of 2.9m and a total height of 85m. The main structure is a shear wall structure, with a basement on the first floor. In this case, the tower crane foundation size is 5600 × 5600 × 1350, the foundation buried depth is 1.5m, the foundation elevation is -2.500m, and the foundation concrete grade is C30. Use pile foundation as tower crane and its bearing platform

Foundation construction scheme of a 1 # tower crane (rail area)

Liuyue Village in Henggang District, east of Shenhui Road, covers an area of 18.34 hectares. The whole site is an irregular polygon, about 1070 meters long from east to west and 480 meters wide from south to north. It is adjacent to the main subway line, Liuyue Station and Shenhui Road planned to be reconstructed in the north, Yanpai Expressway Flyover under construction and Huancheng West Road (proposed road) in the west, and high-voltage corridor (two 500KV and

Special construction scheme for a tower crane foundation

1/500。 Before pouring, the bolt screw rod shall be covered with a plastic bag, and the foundation bolt shall not be touched during pouring and tamping. During concrete pouring, samples are taken and test blocks are reserved for inspection as the basis for tower crane installation whether the concrete reaches 70% of the design strength. At the same time, the test report is filed as safety data for future reference. 6. Pay attention to curing after concrete pouring, and the curing time shall not be less than 14 days

Construction scheme of tower crane foundation

This scheme is prepared according to the actual situation of the construction site and the characteristics of the project structure. In order to transport the materials to the construction site normally, so as to ensure the smooth progress of the project construction, our company plans to invest one tower crane in this project. The model is Guangxi machine, and the maximum radius is R=50m.

Design and construction scheme of tower crane foundation

Tower crane foundation design and construction scheme Tower crane foundation design and construction scheme Tower crane foundation design and construction scheme

Tower crane foundation construction scheme (attached figure)

This data is: tower crane foundation construction scheme (attached figure), which is detailed and can be downloaded for reference.

Tc5610 tower crane foundation construction scheme

Project name: Celebrity Shijia Xinhu Village Lot K2 Project Construction site: Xinhu Village, the new north side of Houhu Xingye Road, Jiang'an District, Wuhan City Construction scale: Celebrity Shijia Xinhu Village Lot K2 is located in Xinhu Village, the new north side of Houhu Xingye Road, Jiang'an District, Wuhan City. It consists of four high-rise residential buildings, one multi-storey community service building and its affiliated shops

Tower crane foundation construction scheme Word

Drawing category Drawing number Drawing date Structural construction drawing Structural construction drawing - 01~Structural construction drawing - 34 December 2017

Construction Scheme for Tower Crane Foundation of XXXXXX Project

Construction Scheme for Tower Crane Foundation of XXXXXX Project

[Guangzhou] QTZ63 tower crane foundation construction scheme

As the tower crane foundation, the cushion cap foundation has a size of 5.0 × 5.0 × 1.35, and the strength grade of foundation concrete is C30. See the attached figure for the reinforcement of foundation structure.

Vanke Project Tower Crane Foundation Construction Scheme

Vanke project tower crane foundation construction scheme, foundation form and foundation bearing capacity requirements: the tower crane foundation form adopts pile supported tower crane foundation. The section size of cushion cap is 2.5m long, 2.5m wide and 1.4m thick; The pile foundation is a manually dug pile foundation, with a pile diameter of 1.6m, embedded in moderately weathered rock stratum no less than 1.5 times the pile diameter, and the foundation soil is required to be solid and firm

[Guangdong] Tower crane foundation construction scheme of a community

3.3 Comprehensively consider the horizontal and vertical transportation needs of on-site materials and the convenience of installation, arm attachment, operation and removal, to meet the construction process (elevator shaft, wall, column adopt set wood formwork, column concrete adopt delivery pump, main body outer frame adopt steel pipe scaffold, etc.), foundation bearing capacity, structural design bearing capacity, dynamic and static load effects.

Technical disclosure of tower crane foundation construction scheme

This data is the technical disclosure of tower crane foundation construction scheme.

Special construction scheme for tower crane foundation (new)

The project is located in Tangxia Town, Jiangmen City. The project is a frame structure with one floor underground and one floor above the ground. The sports exhibition center has a building area of 116154 m2 and a building height of about 28.5m; The building area of the gymnasium is 42360 ㎡, and the building height is about 53m.

Final construction scheme for tower crane foundation

The project is located in the north of Daxue Road and the west of Xuehai Middle Road, Sanshui District, Foshan City. It is a Class I residential land. The project is located in the Yundonghai area, near the Yundonghai Golf Course. The total land use is 712948.1 square meters.

Tower crane foundation construction scheme (attached figure and calculation)

Project name: Celebrity Shijia Xinhu Village Lot K2 Project Construction site: Xinhu Village, the new north side of Houhu Xingye Road, Jiang'an District, Wuhan City Construction scale: Celebrity Shijia Xinhu Village Lot K2 is located in Xinhu Village, the new north side of Houhu Xingye Road, Jiang'an District, Wuhan City. It consists of four high-rise residential buildings, one multi-storey community service building and its affiliated shops

Construction scheme of tower crane foundation for a project in Shanghai

The construction area of this project is 39167 ㎡, and there are five single buildings in total, including one underground motor garage and four small high-rise buildings. The ground floor of Building 25 # is 4.5 meters high, and the rest are 2.8 meters high. The total height of Building 25 # is 46.3 meters, the total height of Building 26 # is 44.6 meters, the total height of Building 27 # is 36.7 meters, and the total height of Building 28 # is 36.2 meters Two tower cranes are set.

Tower crane foundation construction scheme (final version)

The tower crane foundation construction scheme (final version) is rich and detailed, and can be downloaded for reference and study by netizens.

Construction scheme of tc5613-6 tower crane foundation

The xx Science and Technology Innovation Park Phase III - xx Apartments 1~6 # Building Project is located in the east of Jingshisan Road and south of Nanwei 1st Road in the xx New Area. It is composed of six high-rise residential buildings, underground garage and civil air defense. Among them, high-rise residential buildings are located in the outer wall of the underground garage and civil air defense basement.

Construction scheme for tower crane foundation pile of a project

In the construction scheme of tower crane foundation piles for a project, 4 piles are set under each tower crane cushion cap, with a pile diameter of 600, a pile spacing of 4400, and a pile center distance of 600 from the edge of the cushion cap. The ratio of pile spacing to pile diameter is 7.33>6, without considering pile group effect

Design, calculation and construction scheme of tower crane foundation

Tower crane foundation design calculation scheme Tower crane foundation design calculation scheme Tower crane foundation design calculation scheme

Supplementary construction scheme for tower crane foundation of a project

Supplementary construction scheme for tower crane foundation of a project Supplementary construction scheme for tower crane foundation of a project Supplementary construction scheme for tower crane foundation of a project

1 # 63 tower crane foundation construction scheme

According to the general layout of the construction and the actual needs of the site, the tower crane is arranged at the F/15 axis. QTZ63 tower crane foundation design: 5.1 Connection between the new foundation and the original foundation: 16 rebars with a diameter of 20 are planted on the original QTZ40 tower crane foundation, and the new cross beam rebar is welded with the original M27 bolt and the newly planted rebar. 5.2 Cross beam foundation

Report for Approval of Foundation Construction Scheme of 2 # Tower Crane

This data is the report form for the construction scheme of 2 # tower crane foundation, which is detailed and can be used for reference.

Application Form for Approval of 1 # Tower Crane Foundation Construction Scheme

This data is the application form of 1 # tower crane foundation construction scheme, which is detailed and can be used for reference.

Model of special construction scheme for a tower crane foundation

This data is a model of special construction scheme for a tower crane foundation, which is detailed and can be used for reference.

Construction scheme of qtz6010 tower crane foundation

Project name: XX Phase III Construction site: XX Industrial Zone, XX City, southwest corner of the intersection of Huiren Avenue and Jinsha Third Road Construction unit: Jiangxi Hongji Investment Co., Ltd. Design unit: Jiangxi Tongji Architectural Design Consulting Co., Ltd. Supervision unit: Jiangxi Hengxin Construction Engineering Supervision Consulting Co., Ltd. Construction unit: CSCEC Fourth Engineering Bureau Co., Ltd

Construction Scheme of Tower Crane Foundation Pile Project

According to the technical conditions of the two H3/36B tower cranes selected for use on the site and the Geotechnical Engineering Investigation Report 2001 Technical 076 issued by Beijing Survey, Design and Research Institute, the design is carried out according to the requirements of Technical Code for Building Pile Foundations JGJ94-94.

Construction Scheme for Tower Crane Foundation of Langfang Project

Project name: Langfang New Chaoyang Plaza Phase II Area C Project; The Employer: Langfang Shuangli Real Estate Development Co., Ltd; Designer: Beijing Zhongdi Hengcheng Architectural Design Co., Ltd., Hainan Yuanzheng Architectural Design Consulting Co., Ltd

Special construction scheme for tower crane foundation safety

There are 6 buildings in the second section, and the basement shares 2 floors. The total building area is 149392.34 ㎡, including 52000 ㎡ underground and 97392.34 ㎡ aboveground; Floor area: 26000 ㎡ (bid section II); Main structure: shear wall; Building # 1 has 33 floors above the ground, with a height of 100.5m; Building # 2 has 33 floors above the ground, with a height of 100.5m,

Construction scheme for tower crane foundation of a building in a community

The project is located at the northwest side of the intersection of Yanming Avenue and Haihang Road, with a total construction area of 201300 ㎡. There are six high-rise residential buildings in the project, namely, 1, 2, 3, 5, 6, and 7 # buildings, one floor underground, and 25 floors above the ground except for 7 # building, whose structure is shear wall; Building 8~12 # for the 3-storey commercial building of Building 5, and 2-storey for kindergarten and nursing home, structure

Construction scheme for tower crane foundation of a project

Preparation basis and description, project overview, construction technology and methods,

Detailed construction scheme for tower crane foundation of a project

The total land scale is 712948.1 square meters. The project land is divided into three relatively independent plots A, B and C by the golf course, of which Zone B has been built, and the main structure of the display part of Zone A has been basically completed. The project is planned to adopt natural foundation shallow foundation or pile foundation, and the structural form is special-shaped column frame structure; The project is a 2-3 storey villa building.

0331-1 (First Institute) 1 Tower Crane Foundation Construction Scheme

0331-1 (First Institute) 1 # tower crane foundation construction scheme 0331-1 (First Institute) 1 # tower crane foundation construction scheme 0331-1 (First Institute) 1 # tower crane foundation construction scheme 0331-1 (First Institute) 1 # tower crane foundation construction scheme 0331-1 (First Institute) 1 # tower crane foundation construction scheme

Method Statement for Tower Crane Foundation 18.doc