Example of construction organization design of industrial plant

Construction organization design of industrial plant

The industrial plant covers an area of about 60000 square meters and has a floor height of 9.6 meters

Construction organization design of an industrial workshop

The construction organization design of an industrial plant is rich and detailed, and can be downloaded for reference and study by netizens.

Construction organization design of single-layer industrial workshop

This project is the air conditioning compressor production workshop of Zhengzhou Gree, which will become the largest air conditioning compressor production workshop in Asia after completion. The layout of the construction organization design is reasonable. The flow arrangement is reasonable and tight, and the quality and safety construction period are guaranteed in place. All new technologies and schemes shall be applied reasonably. It is a rare construction organization design.

[Xiamen] Construction organization design of industrial plant

This data is the construction organization design of [Xiamen] industrial plant, which is only for reference.

Construction organization design of an industrial workshop in Henan

The construction scale of the alumina plant of Henan * * * * Aluminium Industry Co., Ltd. is 400000 tons of alumina annually. Function of raw material mill: bauxite ore from homogenizing warehouse and lime ore from lime storage yard are ground by mill, mixed with mother liquor from mother liquor storage tank, enter desilication tank for pre desilication, and then enter dissolution through high-pressure pump room. The project includes civil construction and design

[Beijing] Industrial plant construction organization design

When the diameter of longitudinal load-bearing reinforcement such as foundation, column and beam is ≥ 22mm, the straight thread connection method shall be adopted, and the rest shall be connected by welding and binding

Construction organization design of industrial workshop on the second floor

This phase of the project covers a building area of 4500M 2, and there are two floors in part of the first floor of the framework.

Construction Organization Design of Multi storey Industrial Workshop

This project is a frame structure reinforced concrete project in Meihekou City, Jilin Province. The elevation of the foundation bottom is -5.700m, and the total height of the building is 22.2/26.4m. The relative elevation of the indoor floor of the project is 0.00m, the indoor and outdoor elevation difference is 0.30m, and the outdoor floor is -0.30m. There are two elevators in the building, and the elevator roof elevation is 30.30m, female

Construction organization design of large industrial plant

The project is a single-layer industrial building, which is composed of main plant, open roof span and auxiliary production room. The main plant and the open span are a one story portal rigid frame steel structure plant, and the auxiliary production room is a two story reinforced concrete frame structure. The base of the structural parts welding workshop covers an area of 27598.16 square meters, and the building area is 29073.69 square meters; Strong seismic fortification of buildings

Construction Organization Design of Xiamen Industrial Plant

This plan is the construction organization design of Xiamen industrial plant, with accurate and comprehensive design and detailed content for reference

Construction organization design of an industrial workshop in Jiangsu

To the south of the new plant is Chuanbu Highway, to the west is Lihe River, and to the traffic and water use side are three plants and green belts, to the south is a comprehensive building, and to the north is a raw material warehouse.

Construction organization design model of an industrial workshop

This data is a model of construction organization design for an industrial factory building, with detailed contents for reference.

Construction organization design of XX industrial plant

The construction organization design of the production plant project of XX Industrial Plant (United) Co., Ltd. is a comprehensive document of organization, technology, production, economy, safety and other activities prepared according to the engineering design drawings and site survey of the production plant of XX Industrial Plant (United) Co., Ltd. The construction organization design focuses on the preparation of construction deployment, construction plan, construction management, construction methods and technology

Construction organization design of industrial plant (1)

In this project, the height of formwork erection in the production workshop is more than 7.5m, the height of formwork erection in the first floor of the warehouse is more than 7.0m, the height of partial formwork erection is more than 11.5m, and the span of the production workshop is up to 8.4m. The characteristics of the tall formwork support system of this project are: 1. The area of the high support is large; 2. Large span; Commercial concrete is used in this project, and truck pump or ground pump is used for mixing during pouring and vibrating

Construction organization design of industrial workshop in a city

This document is the construction organization design of an industrial plant in a city. The content includes the general situation and progress of plant construction. The content is detailed for reference only.

Construction Organization Design.pdf

Construction organization design of a single-layer industrial workshop

The construction organization design of a single-layer industrial workshop is very detailed and can be used for reference.

Construction organization design of DELL Xiamen industrial plant

Construction organization design of DELL Xiamen industrial plant

Construction organization design of industrial plant (P=101)

Our company's guiding ideology for this project is: quality first, considerate service, owner satisfaction, quality centered, in accordance with the GB/T19002-ISO9002 Quality Management and Quality Assurance series standards, to establish a project quality assurance system, select high-quality project managers, actively promote the application of new technologies, new processes, new equipment, new materials, and carefully organize

Construction Organization Design of Phase I Workshop in an Industrial Park

The plan of the proposed project is in a "one" shape. The building layout is: the column grid is 8.3 × 8.4, five spans and 60 bays, the bottom floor is 5.5 m high, the second and third floors are 4.8 m high, the total height is 19.50 m, the building is 99.8 m long from east to west, and 42.2 m wide from south to north. Seismic joints are set between axes ⑦ and ⑧, with a building area of 13153.93m2.

Construction organization design of an industrial workshop in Harbin

The plane shape of "No. 6 Factory Building Project of Industrial Project in * * Road Concentration Area" is rectangular, covering an area of 1672.07 ㎡, with a total building area of 1903.45 ㎡. It is a single storey single span factory building, with a span of 18 m. The office area is a three storey brick concrete structure.

Construction organization design of steel structure industrial plant

The construction organization design is prepared based on the bidding documents and drawings provided by the owner, in accordance with the relevant national and local current construction specifications and standards, referring to the construction experience of similar projects in the past, and combining the calculation and analysis results for the project. The construction organization design is only used for the construction of this steel structure project.

Construction organization design of electronic industrial workshop (framework)

The "Computer Chongqing Production Base Project" is an electronic industrial plant invested by the government. The project is located in Chongqing. The project plans to build No. 1 building (comprehensive plant) and No. 2 building (power plant); The project covers an area of about 30000 square meters, with a north-south width of 100m and a east-west length of 280m. The plant area is adjacent to the park road; The building area is about 60000 square meters.

Bidding construction organization design of an industrial workshop in Baoding

The project consists of office building, production plant (two main plants and auxiliary plants), three floors of office building, single storey steel structure of plant and one floor of auxiliary plant, with a building area of 23500m2. The construction site is located in * * Road * * Industrial Park, and the construction unit is Baoding * * Automotive Interior Trim Co., Ltd. The planned commencement date is August 15, 2004

Construction organization design of a factory building in an industrial park in Anhui

This project is the A # plant project of Ankang Industrial Park of Anhui Konka Electronics Co., Ltd., with a building area of 19329.60m2 and a total height of 7.90m. The seismic fortification intensity of this project is 6 degrees, and the design service life is 50 years. One storey portal steel structure, Class II building, fire resistance rating is Class I.

Construction organization design of an industrial workshop in Beijing

The plant area of the project covers 14.7421m2. The scope of this bidding is a combined plant, located in the northwest corner of the plant area, with a building area of 31989.94 ㎡. It is a steel structure industrial plant with three floors above the ground. There is a interlayer in some parts, with a length of 144m and a span of 72m.

Construction organization design of a DELL Xiamen industrial plant

The total construction period of the project is 187 calendar days, including 54 days for the completion of the main body. The construction period is very tight. It is necessary to straighten out the relationship between all aspects, ensure that the funds are in place, try to create a working face, and organize a three-dimensional crossing flow process to ensure that the project is handed over on schedule.

Construction Organization Design of Single storey Industrial Workshop in a City

This data is the reinforcement construction scheme and technical measures, 12 pages in total.

Compilation of construction organization design of single-layer industrial plant

1. The project is located in a cement product factory, with a building area of 1921 square meters, an overall dimension of 18 × 84 meters, and a total height of 13.24 meters. The clean exterior wall is pointed with original mortar. The inner wall is made of 20 thick mixed mortar, and the surface is brushed with two coats of lime water. The bottom of roof panel and roof truss are brushed with two coats of lime water. The doors and windows are brushed with one coat of light gray ready mixed paint and two coats of primer. The structural foundation adopts independent steel concrete foundation

Construction organization design of a single-layer industrial workshop

The new general assembly workshop is located to the east of the original plant, to the south of the river, to the north of the residential buildings, and to the east of the farmland. This workshop is a fabricated reinforced concrete single-layer industrial workshop, with a longitudinal length of 6.0 × 17=102.0m, a formwork direction of 27.0 × 2=54.0m, and a 10t crane in two spans. The plane and profile of the assembly workshop are shown in Figure 2 to Figure 7. The workshop maintenance structure is prefabricated

Construction organization design of single storey brick concrete industrial workshop

The project is a prefabricated single-layer industrial plant, with a building area of 24000 square meters, consisting of two parts: plant and living room. The powerhouse is a prefabricated bent structure, with 10 spans in total, of which 8 spans are assembly workshops (assembly), with a span of 18 meters; The two spans are constant temperature workshops, with a span of 12 meters. The living room is a mixed structure with three floors and a floor height of 2.9m. Powerhouse foundation is reinforced concrete

Construction Organization Design of Dell Xiamen Industrial Plant

The factory building project of Dell (Xiamen) Co., Ltd. was designed by the 11th Design and Research Institute of Information Industry Electronics Co., Ltd. and invested and constructed by Dell (Xiamen) Co., Ltd. The project is located in Xiamen High tech Industrial Zone, including six unit projects, including comprehensive plant, power center, water pump room, guard room, smoking room and outdoor works, with a total construction area of 21218.98 square meters.

Construction Organization Design of an Industrial Workshop in Tianjin

This data is the construction organization design of an industrial plant in Tianjin (English), which is detailed and can be used for reference.

Construction organization design scheme of an industrial workshop

This data is the construction organization design scheme of the industrial plant, and the contents are comprehensive and detailed for your reference.

Construction organization design of industrial plant engineering

On the basis of carefully reading the bidding documents, getting familiar with the drawings, understanding the design intent, understanding the spirit of the Q&A meeting and conducting field survey on the project site, we organized the bidding for the standard industrial plant project of Wuhan Yinhu Science and Technology Development Park.

Construction organization design of single story and multi span industrial plant

The original building of the project is a single-layer multi span industrial plant, which is a bent structure and consists of I-shaped bent columns (with corbels), thin web beams, large roof panels, crane beams and enclosure walls. The span is 18m, the column spacing is 6m, and the elevation of the building cornice is 9.000m. Among them, the spanning part has been removed, some roof panels have been removed and moved, and there are many reinforced concrete on the ground inside the building

Construction organization design scheme of industrial plant

The construction organization design scheme of industrial plant is detailed and rich, which can be downloaded by netizens.

Construction Organization Design of Phase II Workshop of an Industrial Park

This data is the construction organization design of the second phase workshop of an industrial park, which is detailed and can be used for reference.

Detailed scheme for construction organization design of industrial plant

This data is the detailed plan for the construction organization design of the industrial plant, which is detailed and can be used for reference.

Construction organization design of prefabricated industrial plant

This project is a mechanical processing and assembly workshop project of a fabricated single-layer industrial plant. The project owner is a machinery limited company, which is designed by a design and research institute. The project is composed of three span single-layer industrial plants (including machining workshop and assembly workshop), with a total construction area of 7646.5m2. The powerhouse is 125.6m long, the column spacing is 6m, and the span of the assembly section is 24