-
Technical disclosure of brick concrete structure formwork This data is the technical disclosure of brick concrete structure formwork, which is valuable and detailed for reference. -
Technical disclosure record of brick concrete structure formwork Disclosure summary: relevant materials, machine and tool preparation, quality requirements and construction process of brick concrete structure formwork. -
Technical disclosure of formwork installation and removal The wooden formwork can be made in the factory or on the construction site. The surface of the wooden formwork in contact with the concrete should be flat and smooth. The wooden formwork that is repeatedly used should be nailed with thin iron sheets on the inside. The joints of wood formwork can be made into flat joints, lap joints or tongue and groove joints. When flat joints are used, measures shall be taken to prevent mortar leakage. The corners of the wooden formwork shall be filleted or beveled. -
Safety technical disclosure of formwork installation This document is the technical disclosure of formwork installation safety. It is valuable and detailed for reference. -
Technical disclosure of building electrical installation 1 The main materials, semi-finished products, finished products, accessories, appliances and equipment used in the building electrical system must have quality certificates, specifications, models and performance test reports. 2. Materials shall comply with national technical standards or design requirements. Materials entering the site shall be inspected and accepted and reported to the supervising engineer for verification and confirmation. 3 The construction must meet the design requirements and construction specifications. -
Technical disclosure of main structure formwork engineering 1.1.1 The formwork has been processed and configured according to the drawing size, and the surface of the formwork is flat and clean, with complete accessories. 1.1.2 The release agent used in this project has been checked, and the quality of release agent has been checked as required to meet the requirements. -
Reference template for safety technical disclosure of steel structure installation General safety regulations II. Technical safety measures for steel structure installation III, technical measures for safe use of electricity IV, technical safety measures for high-altitude operation V, technical safety measures for lifting operation VI, technical measures for safe fire prevention VII, civilized construction on site -
Housing construction technical disclosure brick concrete structure formwork works This material is the brick concrete structure formwork project of house building technical disclosure, which is detailed and can be downloaded for reference. -
Technical disclosure of brick concrete structure formwork engineering This data is the technical disclosure of the brick concrete structure formwork engineering. The data is valuable, detailed and accurate, and can be used for reference. -
Technical disclosure of secondary structure formwork engineering Place the axis, formwork sideline and horizontal control elevation, the bottom opening of the formwork is flat and solid, and the ground anchor for column reinforcement has been embedded and can be used. 2. After the formwork is processed, a specially assigned person shall carefully check the specification and size of the formwork, number it according to the formwork matching drawing, evenly paint the isolating agent, stack it according to the specifications, and take rain proof, moisture-proof and smash proof measures. -
Technical disclosure record of frame structure formwork Summary of disclosure: relevant materials, machine and tool preparation, quality requirements and construction process of formwork. -
Technical disclosure of shear wall structure formwork construction The formwork shall be numbered according to the wall, painted with water-based isolating agent, and stacked according to specifications. -
Formwork for technical disclosure of brick concrete structure formwork This data is the technical disclosure template of brick concrete structure formwork engineering, including construction preparation, quality requirements, process flow, operation process, etc., which is detailed and can be used for reference. -
Construction scheme for technical disclosure of brick concrete structure formwork The project adopts wood formwork or stereotyped composite steel formwork, and general formwork erection method can be used. In order to prevent formwork bulging during concrete pouring and affecting the flatness of the external wall, wood formwork or composite steel formwork shall be pasted on the external wall, and two braces shall be set every 1 meter. The brace shall be tied to the internal wall, and the diameter of the brace shall not be less than φ 20. -
Technical disclosure record of underground structure formwork engineering The box formwork shall be made, the panel shall be 13mm thick, the main keel shall be Φ 48 double steel pipes @ 250mm, the secondary keel shall be 50 × 80 batten @ 250mm, and the inner side shall be internally supported by the combination of Φ 48 steel pipes and U brackets, horizontal and vertical @ 250mm. The box bottom is fixed with double steel pipes with φ 14 steel bars, one end of which is tensioned, and the other end is welded to the iron bars under the bottom plate, -
Safety technical disclosure of formwork installation and removal Formwork, support and arch frame can be made of steel, plywood, plastic and other materials that meet the design requirements. Before pouring concrete, the formwork shall be coated with release agent. The release agent for exposed concrete formwork shall be of the same type. Waste oil and other oils shall not be used, and the construction joints of reinforcement and concrete shall not be polluted. The reused formwork, support and arch frame shall be checked frequently -
Technical disclosure of formwork engineering processing and installation Technical Requirements for Demolition 1. Formwork shall be removed in the designed order. If there is no design specification, the order of support before removal and support after removal shall be followed. Throwing is strictly prohibited during removal. 2 The support and arch frame shall be unloaded in several cycles according to the proposed unloading procedure. The unloading amount should be small at the beginning and gradually increased later. It shall be unloaded symmetrically and evenly in the longitudinal direction and simultaneously in the transverse direction. -
Technical disclosure of single-layer steel structure installation This document is the technical disclosure for the installation of single-layer steel structure. It is valuable and detailed for reference. -
Safety technical disclosure of complete installation and construction Full set of safety technical disclosure for installation and construction, very comprehensive, more than 500 sets -
Safety technical disclosure of foundation formwork installation A. The shear wall and column of the basement are supported with plywood formwork, which requires high strength, rigidity and stability of the formwork and support system. The inner formwork support is composed of steel pipes and fasteners, which is supported on the full scaffold, the outer side is supported on the slope of the foundation pit, and a base plate is set on the slope to spread the support force. The spacing between horizontal braces and diagonal braces is 0.9m. -
Construction technical disclosure -- installation of wall cabinet and wall hanging cabinet The technical disclosure in the construction enterprise is a technical disclosure made by the technical leader in charge to the construction personnel before the commencement of a unit project or a subdivisional project. Its purpose is to enable the construction personnel to have a more detailed understanding of the project characteristics, technical quality requirements, construction methods and measures, so as to organize the construction scientifically, Avoid technical quality, etc -
Construction process and technical requirements for formwork installation of main structure According to the construction plane axis control network, set out the axis and position line of cushion cap, bottom plate, shear wall, column, beam slab and stair components at the operation position of foundation, main structure concrete cushion or floor according to the construction process and technical requirements for the installation of main structure formwork, and mark with ink marker and red paint -
Safety technical disclosure of frame structure formwork engineering Formed reinforcement: it must conform to the specification, model, size, shape and quantity of the ingredient list, and should be marked. Formed reinforcement must be covered to prevent rain and rust. -
Technical disclosure of brick concrete structure formwork construction When transporting bricks, stones, mortar and other materials, the vehicle shall be stable and shall not run violently. The distance between the front and rear vehicles shall not be less than 2m; When driving on gradient, the distance between two vehicles shall not be less than 10m. Parallel or overtaking is prohibited. The materials shall not exceed the carriage. -
Technical disclosure of the main structure formwork project of a square After the quality of concealed columns is checked by the quality inspector and is qualified, the next process can be started. Binding of shear wall reinforcement mesh: during the binding process, two trapezoidal clamps are placed vertically at both ends of the shear wall to control the horizontal spacing of horizontal reinforcement; After the floor slab reinforcement is bound and before concrete pouring, a horizontal trapezoidal caliper is placed at the root of the shear wall to control the spacing of vertical reinforcement -
Technical disclosure of main structure formwork construction First, put the four side formworks on the first floor of the column in place and assemble them. Each side is equipped with an internal corner formwork or connecting angle formwork, which is connected alternately. -
Technical disclosure of frame structure formwork engineering This data is the technical disclosure of frame structure formwork engineering, which is valuable and detailed for reference. -
Technical disclosure record of underground structure formwork engineering Structural pouring method: wall, slab, beam and column shall be poured at the same time, and different concrete strengths at nodes shall be separated by quick closing mesh. It is required that the joints shall be tight without mortar leakage, and the shape, size and mutual position of the components shall be correct. The formwork structure shall be reasonable to facilitate the support and removal. -
Discussion on the installation technical measures of modern building formwork Abstract: Formwork refers to the formwork formed by fresh concrete and a complete set of structural system supporting the formwork. Among them, the structural part that contacts the concrete and controls the predetermined size, shape and position is called the formwork, and the supporting system is composed of rods, trusses, connectors, metal accessories, and temporary working bridges that support and fix the formwork. For sliding formwork -
Technical disclosure of building structure construction Technical disclosure of building structure construction, including water and electricity, civil decoration, etc., from foundation to main body, from structure to decoration -
Technical disclosure of formwork installation safety of a company 1. Operators entering the construction site must wear safety helmets and fasten the headband. Operators are strictly prohibited to wear hard soled shoes and heels for operation. 2. Guardrails and safety nets shall be provided for operations at heights and near edge openings. If there are no reliable protective measures, safety belts and buckles must be worn. There should be practical safety measures in advance for the installation and removal of high-altitude and complex structural formwork. -
Technical disclosure of steel grid structure installation Installation of steel grid structure Installation of steel grid structure Installation of steel grid structure Installation of steel grid structure -
Safety technical disclosure of formwork installation and removal works This document is the safety technical disclosure of formwork installation and removal works. The document includes: personnel entering the construction site must wear safety helmets, and high-altitude operators must wear safety belts and fasten them firmly; Before work, check whether the tools used are firm. Wrench and other tools must be tied to the body with a rope chain. Nails must be placed in the tool bag to avoid falling and hurting people. Concentrate on your work
-
one Construction scheme of building structure formwork -
two Technical disclosure of building structure masonry -
three Technical disclosure of building secondary structure -
four Technical disclosure of building fire protection installation -
five Technical disclosure of building PC installation -
six Technical disclosure of building lightning protection installation -
seven Technical disclosure of civil air defense installation -
eight Technical disclosure of building water supply installation