Technical disclosure of building survey

Technical disclosure of construction safety of building engineering dimension measurement experiment

Before surveying in rivers, lakes and other waters, it is necessary to obtain the consent of the competent unit, master the water depth, flow rate and other conditions, and take anti drowning measures according to the site conditions

Technical disclosure of surveying and setting out

Before surveying and setting out, carefully read the construction drawings to understand the design intent and construction requirements; Carefully check the design size and elevation of drawings; Check whether the overall dimensions are consistent with the sub dimensions, and whether the dimensions of the general layout and the detailed drawing are consistent. Any discrepancy shall be reported to the design unit in time for verification and correction.

Technical disclosure record of engineering survey

Project name: Beijing Huamao City (Phase V) Development Project; Disclosure date: November 28, 2012; Construction unit: Qingjian Group Co., Ltd; Name of subdivisional works: engineering survey; Summary of disclosure: survey contents of Beijing Huamao City (Phase V) development project

Technical disclosure of building decoration

Face tiles: after the acceptance on site, they shall be selected before construction. Those with quality defects shall be removed first, and then the face tiles shall be selected according to the three categories of large, medium and small, and then stacked on the skids respectively. Different color numbers shall not be mixed.

Technical disclosure of building electrical installation

1 The main materials, semi-finished products, finished products, accessories, appliances and equipment used in the building electrical system must have quality certificates, specifications, models and performance test reports. 2. Materials shall comply with national technical standards or design requirements. Materials entering the site shall be inspected and accepted and reported to the supervising engineer for verification and confirmation. 3 The construction must meet the design requirements and construction specifications.

Architectural technical disclosure -- wall painting

1) The structural works have passed the acceptance. (2) Prepare double row external shelves, or hanging baskets and bridge shelves according to construction requirements. The stand pole of the shelf shall be 20cm away from the wall to ensure operation. It is better not to leave a scaffold eye on the wall to prevent secondary repair, which may cause a flowery feeling on the wall. (3) The reserved holes and buried pipes on the exterior wall have been treated. The cavity of the exterior wall is waterproof and no seepage is found after the water spraying test

Technical disclosure design of setting out and surveying

Preparations, building surveying and setting out, engineering surveying quality requirements, precautions in surveying, safety precautions

Code for technical survey of urban buildings

This material is: Specifications for Technical Survey of Urban Buildings, which is detailed and can be downloaded for reference

Technical disclosure of surveying and setting out construction

This document is the technical disclosure of surveying and setting out construction, which is detailed and can be downloaded for reference.

Technical disclosure of villa measurement in a community

1.2.1 Before the use of total station, theodolite, level gauge and steel tape for construction survey, there must be a valid verification certificate from the metrology department. In addition to verification according to the specified period, in each period, the theodolite and level gauge, as well as the main axis relationship, should also be regularly calibrated every 2-3 months. The instrument shall be maintained by a designated person, checked regularly and regularly, and used in strict accordance with the operating regulations to ensure that the instrument

Safety technical disclosure of surveying and setting out workers

Contents of disclosure: (1) When entering the construction site, safety protection articles must be worn according to regulations. (2) The machine must be avoided during operation. When the machine is running, it is not allowed to work within the operating range of the machine. If it is necessary to work near the construction machinery, the machinery shall be suspended. If necessary

Safety technical disclosure of surveying and setting out construction

1. Safety ladders or earth ramps shall be set up when climbing high ridges and slopes on site. 2. The safe route shall be selected for field survey to avoid dangerous areas such as rivers, lakes, marshes, cliffs, etc. and keep safe. 3. When working near the edge at heights, the operators must stand safely. 4. Before the pile is measured, it shall be confirmed that the underground pipeline is in a safe condition during the pile driving process

Safety technical disclosure regulations of a construction company

For different construction methods, such as grade separation operation, slip form, scaffold construction, formwork construction, etc., which may bring unsafe factors to the construction, technical measures shall be taken to ensure safe construction

Safety technical disclosure of a construction company

The stacking of materials on the formwork shall be coordinated with the construction equipment, and shall be stacked in a decentralized manner, so as not to cause too much concentrated load. When there are special requirements for the load on the formwork, the construction and inspection shall be carried out according to the construction scheme and design requirements.

Safety technical disclosure form of a construction company

Project name, disclosure date, project position and disclosure content

Safety technical disclosure form 2 of a construction company

Construction unit, construction unit, project name, project location, area, safety director, foreman, team leader

Construction technical disclosure -- installation of wall cabinet and wall hanging cabinet

The technical disclosure in the construction enterprise is a technical disclosure made by the technical leader in charge to the construction personnel before the commencement of a unit project or a subdivisional project. Its purpose is to enable the construction personnel to have a more detailed understanding of the project characteristics, technical quality requirements, construction methods and measures, so as to organize the construction scientifically, Avoid technical quality, etc

Arrangement of construction technical disclosure forms

1. Operate in strict accordance with the manufacturing procedures; Welders, lifting workers and other special operators shall work with certificates. 2. The hazard sources on the construction site shall have obvious signs; When entering the construction site, you should dress neatly and wear safety helmet. 3. All kinds of lifting appliances need to be checked regularly and problems found should be handled immediately. 4. If the section length of the steel column is too large, the lifting point position and binding shall be selected for assembly and lifting

Architectural technical disclosure -- ceramic mosaic tile floor

Small bucket, half bucket, broom, square ruler, flat shovel, iron trowel, big bar, middle bar, small bar, screen, narrow trolley, steel wire brush, watering can, hammer, hardwood clapper (240mm × 120mm × 50mm), alloy pointed chisel, alloy flat chisel (welded K6 ～ K8 alloy steel sheets with Φ 6 reinforcement), steel sheet cutting, pulling plate (200mm × 70mm × 50mm)

Safety technical disclosure of setting out and surveying

Adhere to the positioning and setting out work, and must implement the work system of self inspection and mutual inspection, and then the relevant departments and supervisors shall accept the work. The important axis control piles, elevations, and control piles shall be reviewed by the survey personnel of the company's technical development department. Generally, the setting out shall be reported to the supervision company for acceptance after the on-site survey personnel, quality inspectors, and technicians pass the inspection

Compilation of safety technical disclosure of a construction project

This article includes the safety disclosure of the following aspects: earthwork, reinforcement works, formwork works, formwork removal works, scaffold works, material requirements, fastener type steel pipe scaffold, tool type scaffold, basket type scaffold, ramp safety requirements, safety net masonry works, plastering and finishing works

Safety technical disclosure of complete installation and construction

Full set of safety technical disclosure for installation and construction, very comprehensive, more than 500 sets

General safety technical disclosure of building.xls

Technical Disclosure of Construction Engineering

The technical disclosure of construction engineering includes four parts: foundation, roof, decoration and main body

Construction technical disclosure template

Every step

Complete set of technical disclosure of construction engineering (II)

I paid 5000 dragon coins from Zhulong Online, and now it is uploaded in two sets. This part includes a full set of technical disclosure of installation engineering construction. It's no excuse not to give good comments on this material.

Summary of construction safety technical disclosure

Compilation of very comprehensive safety production management standard technical disclosure documents

Technical disclosure of building energy conservation construction

Technical disclosure of building energy conservation construction

Technical disclosure of building structure construction

Technical disclosure of building structure construction, including water and electricity, civil decoration, etc., from foundation to main body, from structure to decoration

Technical disclosure of main structure of building construction

Operators who erect scaffolds must pass the special training and examination and hold the qualified special operation certificate. Those who suffer from high blood pressure, heart disease and other operations unsuitable for climbing are not allowed to engage in scaffold erection and dismantling.  

Code for measurement of building technology engineering

This material is: Code for Survey of Construction Technology Engineering, which is detailed and can be downloaded for reference

Technical disclosure of construction safety (complete)

1. Personnel entering the construction site must correctly wear a qualified safety helmet, fasten the chin belt and lock the buckle;

Technical disclosure of building construction

2.1.1 The acceptance of foundation pit (trench) and pipe trench earthwork must ensure the safety of supporting structure and surrounding environment. When there are indicators in the design, the design requirements shall be taken as the basis. If there are no design indicators, the provisions in Table 2.1 shall be followed.

Construction safety technical disclosure (model)

This safety technical disclosure is complete and only for reference. Please refer to the specific project situation for reference.

Safety technical disclosure of construction equipment and machinery

This document is the technical disclosure for the safety of construction equipment machinery. The document includes: mortar mixer, plunger diaphragm mortar machine, extrusion mortar pump, shotcrete machine, high-pressure airless spraying machine, concrete mixer, concrete mixing plant, concrete mixing truck, concrete pump, concrete pump truck, concrete sprayer, plug-in vibrator, concrete vacuum suction pump Attached flat type

Construction engineering technical disclosure materials

2.1 Materials and main machines and tools: 2.1.1 Cement: 425 # Portland cement, ordinary Portland cement, or slag Portland cement shall be used, and expired, damp and deteriorated cement is strictly prohibited. 2.1.2 Sand: medium sand should be used, and the silt content should not be more than 3%. 2.1.3 Stones: pebbles should be used, and the maximum particle size should not be greater than 40mm, containing mud

Registration Form for Safety Technical Disclosure of a Construction Company

Serial number, disclosure time, disclosure person, name, disclosure catalogue of parts and sub items, disclosure acceptor, number of pages, copies and registrant

Technical disclosure of water conservancy construction quota preparation (formal)

Select professional manufacturers to order hollow grouting anchor bolts in strict accordance with the design requirements, and carry out relevant tests to ensure that the tensile pull force of the anchor bolt body meets the design requirements. The grouting slurry shall be cement slurry. In the construction preparation stage, relevant cement tests and water quality tests shall be completed, and the slurry mix design and relevant tests shall be carried out.

Construction engineering safety technology implementation disclosure

Concealed laying of lightning protection downlead: ① straighten the required flat steel (or round steel) with a hammer first. ② The straightened down lead shall be transported to the installation site, and shall be led up and hung up with the building according to the design requirements. ③ Timely weld the lower end of the down lead with the grounding body or connect it with the disconnection clip. With the gradual increase of the building, lay the down lead inside the building to the roof and out of the roof

Construction engineering safety technical disclosure system

Laying of grounding main line in transformer and distribution room: ① Determine the coordinate axis position according to the design requirements; ② After the support parts are buried, the grounding main line can be laid; ③ Brush yellow and green paint marks on the external surface of the grounding main line.