Contents and requirements of technical disclosure for exterior wall cleaning

Safety technical disclosure of exterior wall brick cleaning

Technical disclosure of stone like paint for an external wall

External wall external insulation base course acceptance qualified Apply external wall flexible water resistant putty External wall flexible water resistant putty acceptance Apply sealing primer Divided setting out Brush separation joint Coating on the separation joint Tape spraying stone like paint Tear off tape stone like paint Acceptance stone like paint polishing and spraying finish paint

Technical requirements disclosure of civil air defense supervision

This data is the disclosure of technical requirements of civil air defense supervision, in word format, 4 pages in total. Catalog: I. Introduction to civil air defense works (hereinafter referred to as civil air defense works) II. Precontrol of raw materials, components and equipment III, Precontrol of orifice protection works IV, Precontrol of civil air defense ventilation and air conditioning works V. Precontrol of building structure

Technical disclosure of external wall insulation pptx

The benzene plate insulation system has been used for decades abroad, and it has been 30 years since the beginning of the north in China. The technology has become mature. The external thermal insulation system of expanded polystyrene board thin plastering external wall has excellent thermal insulation performance, good waterproof performance, wind pressure resistance and impact resistance, which can effectively solve the problem of wall cracking and water leakage. But in 2009 and 2010

Construction management and technical requirements disclosure

Basic requirements for safe production ① Implement the policy of "safety first, prevention first, and comprehensive treatment", and manage production must manage safety, so that safety work and production tasks can be planned, arranged, inspected, summarized, and evaluated at the same time, and safety protection measures can be constructed in advance, and delivered for use after acceptance. ② Strengthen the publicity and education of safety production. After the workers report,

Technical disclosure record of external wall thermal insulation

The technical disclosure record of external wall insulation is detailed and rich, which can be downloaded by netizens

Technical disclosure of external wall plastering (already submitted)

1 Scope This process standard is applicable to indoor and outdoor plastering of cement mortar for industrial and civil buildings. 2 Construction preparation 2.1 Main materials and machines and tools: 2.1.1 Cement: 325 ordinary cement, with the same color, and the products of the same batch number should be used. 2.1.2 Sand: medium sand with an average particle size of 0.35~0.5mm, and the sand particles shall be hard and clean

Safety technical disclosure of external wall thermal insulation

1、 Safe operation and safety requirements: (1) The operators must be healthy, free from physiological defects, diseases not suitable for high-altitude operation, and competent for the work type. (2) When entering the construction site for operation, the safety production rules and regulations and labor discipline of the construction site must be strictly observed.

Technical disclosure of exterior wall stone like paint project

Air compressor: the air compressor with power of more than 5kw, sufficient air volume and pressure of 0.5~1.0MPa is equipped with three gas pipes, which can meet the requirements of simultaneous construction of more than three people and can control the pressure automatically.

Safety technical disclosure of high-rise external wall cleaning construction

This disclosure is aimed at the safety technical disclosure carried out by the high-altitude operation cleaning personnel, and the operators use the self running device, safety rope, etc

Technical disclosure of external wall plastering quality

The plastering surface shall be smooth, clean, uniform in color and free of troweling lines, and the dividing joints and plastering lines shall be clear and beautiful.

Technical disclosure record of dry hanging stone for exterior wall

Send you an engineering data. It will be of great help to engineers and technicians.

Technical disclosure for supervision of dry hanging stone on exterior wall

This document is the technical disclosure of supervision of dry hanging stone for exterior wall, in word format, 64 pages in total. Contents: 1. Construction preparation 2. Operation process 3. Quality standard 4. Finished product protection 5. Quality problems to be noticed 6. Quality records

Technical disclosure of external wall insulation project supervision

This document is the technical disclosure of supervision of external wall insulation works, in word format, 4 pages in total, for reference.

Recording materials for technical disclosure of exterior wall painting

Base course treatment, hanging vertically, square fitting, leveling, plastering mortar cake, plastering bottom mortar, snapping lines and dividing grids, plastering finishing mortar, curing

Technical disclosure of external wall plastering construction

Balcony railings, clothes hanging ironwork, embedded ironwork, pipes, etc. shall be installed in advance. During structural construction, the reserved holes on the wall shall be blocked in advance. The concrete protruding from the wall surface such as columns and lintels shall be leveled, and the recesses shall be brushed in advance. After being soaked with water, 1:3 cement mortar or 1:1:6 cement mixed mortar shall be used for filling and leveling in layers.

Contents and requirements of construction technical data

The term 2.0.1 in Chapter II of the "Data Management Procedures" defines the general term of "documents or data formed and collected and compiled during the whole process of project construction.".

Main contents of construction safety technical disclosure

This document is the main content of construction safety technical disclosure, including: Contents: disclosure of new workers' safety production instructions, disclosure of six disciplines of safety production, disclosure of ten safety technical measures, disclosure of ventilation and air conditioning engineering equipment installation safety technical disclosure, etc.

Technical disclosure for construction safety of exterior wall stone like paint

This document is the technical disclosure for the construction safety of exterior wall stone like paint, including: content introduction: this paper introduces the technical disclosure for the construction safety of exterior wall stone like paint in detail.

Safety technical disclosure of external wall plastering construction

This document is the safety technical disclosure of external wall plastering construction, which is detailed and can be downloaded for reference.

External wall dry hanging stone technology disclosure materials

According to the plastering height and site conditions, the plastering operation frame shall be erected in advance. The frame shall be 20-30cm away from the wall and corner to facilitate operation

Technical disclosure of exterior wall painting of decoration works

Mortar for plastering layer: 1:2.5 cement mortar is used for plastering layer of exterior wall, 1:1:5 composite mortar is used for plastering layer of interior wall, and 1:0.3:3 composite mortar is used for plastering ceiling. When plastering the surface layer, a thin layer of plain mortar is scraped first to make it firmly bonded, followed by plastering layer, then it is scraped flat, rubbed with wood trowel, smoothed and compacted with iron trowel;

Technical requirements for external wall plastering and coating bidding

The Tenderer shall strictly comply with the current national specifications and industrial standards, ensure the product quality and provide complete certificates of materials, performance testing and other related products; Provide product specifications, product construction specifications and technical requirements.

Technical disclosure of exterior wall stone like paint (Word format)

Air compressor: the air compressor with power of more than 5kw, sufficient air volume and pressure of 0.5~1.0MPa is equipped with three gas pipes, which can meet the requirements of simultaneous construction of more than three people and can control the pressure automatically. Spray gun: lower pot spray gun, with a capacity of 500ml and a diameter of more than 1.3mm, the capacity cannot be too large, the operation is inconvenient, the diameter is too small, the construction speed is slow, and the size should not be too large

Technical disclosure of external wall insulation construction

Requirements for thermal insulation board: the thermal insulation board is self extinguishing molded (foamed) extruded foam plastic board, with thickness of 100, 50, 200 mm and volume weight of 30 Kg/m3. The external insulation board can only be used after being approved by the project technology, quality inspection, Party A and the supervisor after the acceptance. The performance index of the insulation board must meet the requirements of Table 1, and the insulation board shall be sprayed with interface agent on both sides.

Contents of safety technical disclosure of door and window works

The window frame of aluminum alloy window shall be installed on the inner and outer walls in accordance with the Code for Construction and Acceptance of Decoration Engineering, 60~80 away from the wall. The fixing parts of doors and windows shall not use ordinary iron sheets, and the spacing shall not be more than 600. The distance from the turning angle shall not be more than 150~200. When galvanized iron sheet is used, its thickness shall not be less than 1mm, its width shall not be less than 25mm, and the fixed iron sheet shall not

Contents of safety technical disclosure of roof works

（1） Safety requirements for roof construction of covered tile (clay tile) 1. Those who suffer from serious heart disease, hypertension, neurasthenia, anemia, etc. and are not suitable for high altitude operators cannot carry out roof construction.

Safety technical disclosure of external wall dry hanging stone

1. All management systems on the construction site must be observed when entering the site for construction. The construction of construction projects must adhere to the policy of safety first and prevention first. 2. When entering the construction site, you must wear a qualified safety helmet, fasten the chin belt and lock the buckle; Use labor protection articles, wear anti-skid rubber shoes, and dress flexibly and civilly; It is forbidden to play and fight on the construction site; It is forbidden to work after drinking. three

Technical disclosure of real stone paint on the third floor exterior wall

Check whether the flatness and lines of the main wall are straight and clear. The base surface is required to be flat and dry (the cement mortar surface should be maintained for more than 15 days), free of floating ash, oil stains, lichen and other pollutants, or it will affect the adhesion and keep it fully dry.

Construction management and technical requirements disclosure data

Requirements for planting reinforcement: the planting reinforcement shall meet the embedding depth of 15d and be firmly bonded. The tie bar shall be 5mm ribbed reinforcement. The tie bar shall be set in strict accordance with the design and specification requirements. Its spacing shall be 500 mm in combination with the brick masonry modulus. The longitudinal main reinforcement of the structural column shall be 9mm ribbed reinforcement

Technical disclosure record of external wall internal insulation

The thermal bridge of the inner wall is curled 400mm inwards. See the statistical table for the insulation thickness. The top and bottom plates of all the bay window panels are the same as those of the wall.

Requirements for preparation of safety technical disclosure. doc

Technical Disclosure of Built in External Wall Form-029

Technical Disclosure for Large Form Built in of External Wall - 029 Technical Disclosure for Large Form Built in of External Wall - 029 Technical Disclosure for Large Form Built in of External Wall - 029 Technical Disclosure for Large Form Built in of External Wall - 029 Technical Disclosure for Large Form Built in of External Wall - 029

External Wall Thermal Insulation Technical Disclosure Record.doc

Contents of technical disclosure of steel structure engineering

National standard Code for Acceptance of Construction Quality of Steel Structures GB50205-2001 National standard Code for Design of Steel Structures GB50017-2003 National standard Technical Code for Cold formed Thin wall Steel Structures GB50018-2002 National standard Quality Inspection of Steel Structures

Technical disclosure of exterior wall paint roller coating construction

External wall paint roller coating construction technology disclosure External wall paint roller coating construction technology disclosure External wall paint roller coating construction technology disclosure External wall paint roller coating construction technology disclosure External wall paint roller coating construction technology disclosure External wall paint roller coating construction technology disclosure

Technical disclosure of fire prevention requirements on construction site

1. When preparing the construction organization design, the general construction plan, construction methods and construction technology shall meet the fire safety requirements. 2. The construction site shall be clearly divided into areas such as hot work, flammable and combustible material storage yard, warehouse, flammable waste concentration station and living quarters. 3. The construction site shall be equipped with lighting equipment at night; Keep the fire truck passageway unblocked, and arrange the force

Technical disclosure record of plastering safety of external wall of mason

1. Safety cranes must be worn when entering the construction site, and safety belts must be fastened when working at heights above 2m. 2. The wooden stool and metal support used for indoor plastering shall be erected steadily and firmly. The span of scaffold board shall not be more than 2 meters. The materials stacked on the shelf shall not be too concentrated. There shall not be more than two people in the same span. 3. Scaffolds are not allowed to be erected near doors and windows. Balcony parts are painted

Technical disclosure contents of masonry subdivisional works

Mandatory provision 1. The strength grade of brick and mortar must meet the design requirements. 2. The corner and junction of brick masonry shall be built at the same time. It is strictly prohibited to build internal and external walls separately without reliable measures. The temporary break that cannot be built at the same time but must be reserved shall be built in a diagonal way, and the horizontal projection length of the diagonal way shall not be less than 2/3 of the height. 3. Small block products used in construction

Technical disclosure of pre construction preparations for bridge construction

Contents of technical disclosure in preparation for early construction: familiar with design documents and construction scheme, technical disclosure and organization design, measurement control and construction budget. The contents can be downloaded for reference.