Safety disclosure of woodworking in winter

Construction safety disclosure of a project to woodworking team

This document is the construction safety disclosure of a project to the woodworking team. The document includes: check whether the tools used are firm before work, the wrench and other tools must be tied to the body with a rope chain, and the nails must be placed in the tool bag to avoid falling and hurting people. Concentrate on working to prevent the nails from binding feet and slipping in the air Scaffolding and protection shall be provided for the installation and removal of formwork above 5m

Safety technical disclosure of winter construction

This document is the safety technical disclosure of winter construction. The document includes: before the commencement of each project, safety disclosure shall be carried out at the same time as technical disclosure, and disclosure of key parts shall be carried out. Safety helmets must be worn when entering the construction site, and the headband must be buckled properly to use labor protection articles. All electric welders, gas welders, crane drivers and on-site truck drivers who participate in on-site construction must

Safety and quality disclosure of winter construction

Winter is coming. In order to ensure the quality of our construction projects in winter, this safety measure is specially formulated, and the national technical and economic policies are carefully implemented to make the construction projects technologically advanced, economically reasonable, safe and applicable, and ensure the quality.

Safety technical disclosure Winter construction

Technical safety disclosure of masonry construction in winter

If there are shockproof joints or settlement joints, the foundations on both sides must be built separately, and any overlapping and biting are strictly prohibited. The exposed tongue shall be scraped off for those laid first, and the shrinkage mortar shall be used for those laid later. The joints shall not be blocked by mortar or broken bricks. Once they fall into the joints, they shall be cleaned in time.

Safety technical disclosure of civil engineering construction in winter

This document is the technical disclosure of civil engineering construction safety in winter, including: content summary: 1. Construction personnel must receive three-level safety education and training before entering the site, and can work only after passing the examination. They must obey labor discipline and obey the command of leaders and safety inspectors. Concentrate on your work and stick to your post. Without permission, it is not allowed to engage in operations other than this type of work; It is strictly prohibited to work after drinking, and it is strictly prohibited to use

(Nanjing) winter construction safety technical disclosure

This document is the technical disclosure of winter construction safety in (Nanjing), including: content summary, etc.

Safety technical disclosure of a construction carpenter plane

This document is the safety technical disclosure of a construction carpenter planer. The contents are complete and can be downloaded

Formwork construction safety disclosure record

The scaffold shall not be removed before the wall formwork is removed, and the crane shall cooperate with the tower crane for removal; Before removing the roof formwork, a safe area and a safe passage must be demarcated, the non safe passage should be sealed with steel pipes and safety nets, and the "No Passage" safety sign should be hung. The operator must not be in this area, and must operate on the operating frame with the springboard paved. Carefully check whether the bolts are removed before lifting the removed formwork

Technical disclosure of winter construction safety of a project

Contents of disclosure: for operation in winter, it is important to do a good job in fire prevention, anti-skid, cold prevention and poisoning prevention. 1. All personnel participating in winter construction shall receive safety education and safety technical disclosure. 2. The stoker must be trained, qualified and certified. 3. The stoker must pass the inspection and acceptance before use.

Safety technical disclosure of carpentry ceiling construction

Construction operation characteristics and hazard sources, specific control measures for hazard sources and safety precautions

Safety disclosure for removal of construction elevator

Preparation before demolition of construction elevator, construction elevator demolition process flow, construction elevator demolition

Safety disclosure of foundation pit support construction

The foundation pit supporting structure shall be selected and designed according to the excavation depth, soil conditions, groundwater level, adjacent buildings (structures), construction environment and methods. For large deep foundation pit, steel timber support, steel sheet pile cofferdam, underground diaphragm wall, row pile retaining wall, rotary jet grouting wall, etc. can be used as structural support. If necessary, support or anchor system shall be set to

Electric welding construction safety disclosure record

Electricians, welders and other special operators must receive special training and pass the examination before they can operate.

Safety disclosure of power supply for winter construction in a staff dormitory

1. The operators must be electricians who have received professional safety technical training and passed the examination, and have obtained the special operation certificate. (within the validity period);

Safety disclosure of gas welding construction of a project in Shanghai

This document is the safety disclosure of gas welding construction of a project in Shanghai. The document includes: when the welding (cutting) torch is ignited, the acetylene valve should be opened first to ignite, and then the oxygen valve should be opened to adjust the flame. The acetylene valve shall be closed before the oxygen valve. During ignition, the welding torch mouth shall not face people, and the burning welding torch shall not be placed on the workpiece or the ground. The welding torch with acetylene and oxygen shall not be placed in the metal container

Technical disclosure of carpentry (formwork worker) construction safety

Timber (formwork) transportation and stacking (1) Before operation, check whether the transportation tools used have hidden dangers, and use them after passing the inspection. (2) The catwalk or safety ladder shall be used to go up and down the trench or structure, and it is strictly prohibited to take slings or climb up and down the scaffold. (3) The safety ladder shall not be out of gear or elevated. The upper end of the safety ladder shall be firmly tied, and the lower end shall be provided with anti-skid measures

Construction scheme for safety disclosure of large formwork

Large formwork safety disclosure construction scheme Large formwork safety disclosure construction scheme Large formwork safety disclosure construction scheme

Construction scheme for project safety disclosure

Construction scheme of project safety disclosure Construction scheme of project safety disclosure Construction scheme of project safety disclosure

Construction technology safety disclosure record

4. Installation and construction of arc suppression coil of grounding transformer includes installation and commissioning of grounding transformer, arc suppression coil, isolating switch, central screen and control cabinet (1). During installation, equipment shall be prevented from tilting, falling to the ground and being impacted; (2) The distance between live parts of equipment and ground and between equipment shall meet the specifications; (3) The equipment is well grounded and firmly installed;

Safety disclosure of pile foundation construction

Construction Safety Disclosure of Pile Foundation.doc Construction Safety Disclosure of Pile Foundation.doc Construction Safety Disclosure of Pile Foundation.doc

Three level safety disclosure for pipe trench construction

When cutting pipes with saws, saws, pipe cutters and grinding wheel pipe cutters, the pipes shall be leveled and clamped firmly, and the force shall not be too strong. When cutting is near, the pipes shall be supported by hands or brackets. The grinding wheel blades of the grinding wheel pipe cutter shall be intact, the motor wiring shall be correct, and the grounding shall be reliable. During operation, stand at the side.

Safety disclosure of Zihe Bridge construction

1. The construction personnel must wear safety helmets when entering the construction site. For different types of work, they must wear various safety protection articles as required. It is strictly prohibited for the construction personnel to work after drinking. 2. All construction personnel shall not sit, lie, stop or stay at the construction site. 3. All safety facilities and danger signs in the construction site shall not be removed or moved by anyone without authorization. 4. Constructors must wear

Subgrade construction safety disclosure (Level II)

Bulldozer safety operation regulations, grader safety operation regulations, loader safety operation regulations

Safety disclosure of high-temperature construction in Nanjing in summer

Nanjing Summer High Temperature Construction Safety Disclosure Nanjing Summer High Temperature Construction Safety Disclosure Nanjing Summer High Temperature Construction Safety Disclosure Nanjing Summer High Temperature Construction Safety Disclosure

Operating Procedures for Electrician Construction Safety Disclosure

Electricians must receive professional safety technical training and pass the exam. Non electricians are strictly prohibited from conducting electrical operations.

Construction safety disclosure of the construction unit to the construction enterprise

This document is the construction safety disclosure of the Employer to the construction enterprise. The document includes: according to the provisions of the Regulations on the Administration of Work Safety in Construction Projects, in accordance with the mandatory standards for project construction and in combination with the construction characteristics of the project, the construction organization design (scheme), special project construction scheme and safety production assurance measures of the project should be prepared and submitted to the project supervision unit for review; It is required to organize special

Safety disclosure of power shaft construction of a project in Xi'an

This document is the safety disclosure for the construction of a power shaft of a project in Xi'an. The document includes: in the process of earthwork excavation, attention should be paid to the change of the soil wall at any time. If any abnormal situation is found, the construction must be stopped immediately, wooden supports should be set and reported to the Project Department for treatment. The tools and materials used for bricklaying shall be placed in a secure place, and the broken bricks and mortar around the foundation pit and the pedal shall be placed

Technical construction safety disclosure of masonry workers

Embedded unburned bricks: 2 bricks shall be placed on each side when the height of the opening is within 1.2m; 1.2m-2m high, 3 pieces on each side; 2m~3m high, 4 pieces on each side; The position of embedded bricks is generally four bricks on the upper or lower side of the opening, and evenly distributed in the middle. The reserved holes, hard frame supports and heating and sanitary pipes for the installation of steel doors and windows shall be reserved according to the design requirements and shall not be chiseled afterwards.

Construction scheme for safety disclosure of a pumping equipment

Construction scheme for safety disclosure of a pumping equipment Construction scheme for safety disclosure of a pumping equipment Construction scheme for safety disclosure of a pumping equipment

Complete disclosure model of construction electricity safety

Construction electricity safety disclosure Construction electricity safety disclosure Construction electricity safety disclosure Construction electricity safety disclosure

Civilized construction safety disclosure of relocation house project

1. Project Name: Relocation Housing and Real Estate Project in XX Area, XX City, XX Province 2. Project Location: XX Village, XX District, XX City, XX Province 3. Construction Unit: XXXX Real Estate Co., Ltd. 4. Geological Survey Unit: 5. Design Unit: 6. Construction Unit: Chongqing XX 7. Supervision Unit: XX Zhengye Engineering Technology Investment Co., Ltd. 8

Construction scheme for safety disclosure of engineering gas welding

Construction scheme of engineering gas welding safety disclosure Construction scheme of engineering gas welding safety disclosure Construction scheme of engineering gas welding safety disclosure

Construction scheme for safety disclosure of tower crane

Construction scheme for safety disclosure of engineering tower crane Construction scheme for safety disclosure of engineering tower crane Construction scheme for safety disclosure of engineering tower crane

Construction scheme for safety disclosure of warehouse storage

Warehouse safekeeping safety disclosure Warehouse safekeeping safety disclosure Warehouse safekeeping safety disclosure Warehouse safekeeping safety disclosure

Construction Scheme for Safety Disclosure of Materials and Tools Stacking

Material and tool stacking safety disclosure construction scheme Material and tool stacking safety disclosure construction scheme Material and tool stacking safety disclosure construction scheme

Construction scheme for temporary power safety disclosure

Construction Scheme of Temporary Power Safety Disclosure Construction Scheme of Temporary Power Safety Disclosure Construction Scheme of Temporary Power Safety Disclosure

Construction safety disclosure of static pressure prefabricated pipe pile

When blasting is carried out in the hole, the holes shall be arranged and the charge shall be controlled in strict accordance with the design. All underground personnel must be evacuated from the borehole; Draw a safe distance, set up guard posts, prohibit charging and wiring during lightning and thunder, and strictly follow the safety operation procedures during construction. After blasting, force clean air into the hole to eliminate harmful gas, and then go down the well after the harmful gas is discharged.

Detailed safety disclosure of high-temperature construction in summer in Nanjing

Meteorology defines the daily maximum temperature greater than or equal to 35 ℃ as "high temperature day", and "high temperature day" for more than five consecutive days as "continuous high temperature". If the temperature is too high, the function of the stomach and intestines will be relatively weakened due to the stimulation of heat. It is easy to suffer from head fatigue, chest depression, loss of appetite and other discomfort, even heatstroke, which will harm health. For this purpose, the project department of the company formulates

Safety disclosure of river dredging construction

The Project Department shall organize in a planned way, and regularly carry out safety education and training for the management personnel and construction personnel of the operation team. The operation team shall strictly abide by the relevant laws and regulations and this safety technical disclosure, and must achieve safe production